Created
July 18, 2016 00:53
-
-
Save zivester/685b3151ca22e14c72f650aad56adb67 to your computer and use it in GitHub Desktop.
eBay 256gb m.2 Liteon sold to leonid3131
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build) | |
| Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org | |
| === START OF INFORMATION SECTION === | |
| Device Model: LITEONIT LGT-256M6G | |
| Serial Number: SD0E97903L1TH4510BJF | |
| Firmware Version: 2G87901 | |
| User Capacity: 256,060,514,304 bytes [256 GB] | |
| Sector Size: 512 bytes logical/physical | |
| Rotation Rate: Solid State Device | |
| Device is: Not in smartctl database [for details use: -P showall] | |
| ATA Version is: ACS-2, ATA/ATAPI-7 T13/1532D revision 4a | |
| SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) | |
| Local Time is: Sun Jul 17 20:52:04 2016 EDT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART Status not supported: Incomplete response, ATA output registers missing | |
| SMART overall-health self-assessment test result: PASSED | |
| Warning: This result is based on an Attribute check. | |
| General SMART Values: | |
| Offline data collection status: (0x00) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Disabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: ( 10) seconds. | |
| Offline data collection | |
| capabilities: (0x15) SMART execute Offline immediate. | |
| No Auto Offline data collection support. | |
| Abort Offline collection upon new | |
| command. | |
| No Offline surface scan supported. | |
| Self-test supported. | |
| No Conveyance Self-test supported. | |
| No Selective Self-test supported. | |
| SMART capabilities: (0x0002) Does not save SMART data before | |
| entering power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x00) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 1) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 10) minutes. | |
| SCT capabilities: (0x003d) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 1 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 16384 | |
| 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 608 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2753 | |
| 170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1 | |
| 171 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 0 | |
| 172 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 0 | |
| 173 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 44778 | |
| 174 Unknown_Attribute 0x0003 100 100 000 Pre-fail Always - 52 | |
| 178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 000 Old_age Always - 1 | |
| 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 010 Pre-fail Always - 1120 | |
| 184 End-to-End_Error 0x0033 099 099 000 Pre-fail Always - 1 | |
| 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 1 | |
| 199 UDMA_CRC_Error_Count 0x0003 100 100 000 Pre-fail Always - 18 | |
| 233 Media_Wearout_Indicator 0x0003 100 100 000 Pre-fail Always - 11194 | |
| 241 Total_LBAs_Written 0x0003 100 100 000 Pre-fail Always - 205067 | |
| 242 Total_LBAs_Read 0x0003 100 100 000 Pre-fail Always - 588307 | |
| SMART Error Log Version: 1 | |
| Warning: ATA error count 0 inconsistent with error log pointer 2 | |
| ATA Error Count: 0 | |
| CR = Command Register [HEX] | |
| FR = Features Register [HEX] | |
| SC = Sector Count Register [HEX] | |
| SN = Sector Number Register [HEX] | |
| CL = Cylinder Low Register [HEX] | |
| CH = Cylinder High Register [HEX] | |
| DH = Device/Head Register [HEX] | |
| DC = Device Command Register [HEX] | |
| ER = Error register [HEX] | |
| ST = Status register [HEX] | |
| Powered_Up_Time is measured from power on, and printed as | |
| DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
| SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
| Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) | |
| When the command that caused the error occurred, the device was in an unknown state. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 50 10 16 00 00 00 00 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 00 50 16 00 00 00 00 99 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] | |
| 00 50 16 00 00 00 00 96 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] | |
| 00 50 16 00 00 00 00 92 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] | |
| 00 50 16 00 00 00 00 8e 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] | |
| 00 00 00 00 00 00 00 04 00:00:00.000 NOP [Abort queued commands] | |
| Error -1 occurred at disk power-on lifetime: 768 hours (32 days + 0 hours) | |
| When the command that caused the error occurred, the device was in an unknown state. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 00 00 00 00 00 10 00 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 00 00 00 00 00 00 00 16 15d+15:21:26.784 NOP [Abort queued commands] | |
| 00 00 00 00 00 00 00 16 15d+15:15:59.104 NOP [Abort queued commands] | |
| 00 00 00 00 00 00 00 16 15d+15:12:42.496 NOP [Abort queued commands] | |
| 00 00 00 00 00 00 00 16 15d+15:09:25.888 NOP [Abort queued commands] | |
| 00 00 00 00 00 00 00 00 15d+15:03:58.208 NOP [Abort queued commands] | |
| Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) | |
| When the command that caused the error occurred, the device was in an unknown state. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 00 50 00 00 00 00 78 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 50 00 00 00 00 00 74 00 00:00:00.022 FORMAT TRACK [OBS-4] | |
| 50 00 00 00 00 00 70 00 00:00:00.022 FORMAT TRACK [OBS-4] | |
| 50 00 00 00 00 00 6d 00 00:00:00.022 FORMAT TRACK [OBS-4] | |
| 50 00 00 00 00 00 6a 00 00:00:00.022 FORMAT TRACK [OBS-4] | |
| 00 00 00 00 00 03 04 00 00:00:00.000 NOP [Abort queued commands] | |
| Error -3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) | |
| When the command that caused the error occurred, the device was in an unknown state. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 00 00 00 00 66 50 16 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 00 00 00 00 63 50 16 00 00:00:00.000 NOP [Abort queued commands] | |
| 00 00 00 00 61 50 16 00 00:00:00.000 NOP [Abort queued commands] | |
| 00 00 00 00 5c 50 16 00 00:00:00.000 NOP [Abort queued commands] | |
| 00 00 00 00 59 50 16 00 00:00:00.000 NOP [Abort queued commands] | |
| 00 00 00 03 00 00 00 00 00:00:00.000 NOP [Abort queued commands] | |
| Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) | |
| When the command that caused the error occurred, the device was in an unknown state. | |
| After command completion occurred, registers were: | |
| ER ST SC SN CL CH DH | |
| -- -- -- -- -- -- -- | |
| 00 00 56 50 16 00 00 | |
| Commands leading to the command that caused the error were: | |
| CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name | |
| -- -- -- -- -- -- -- -- ---------------- -------------------- | |
| 00 00 51 50 16 00 00 00 00:00:00.000 NOP [Abort queued commands] | |
| 00 00 4e 50 16 00 00 00 00:00:00.000 NOP [Abort queued commands] | |
| 00 00 49 50 16 00 00 00 00:00:00.000 NOP [Abort queued commands] | |
| 00 c8 ca 36 01 00 00 ea 00:00:00.000 NOP [Reserved subcommand] [OBS-ACS-2] | |
| 00 03 04 00 00 00 00 00 29d+22:00:32.063 NOP [Reserved subcommand] [OBS-ACS-2] | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 24322 - | |
| # 2 Extended offline Completed without error 00% 19458 - | |
| # 3 Short offline Completed without error 00% 15874 - | |
| Selective Self-tests/Logging not supported | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment