Skip to content

Instantly share code, notes, and snippets.

@scotty1024

scotty1024/gist:5127260

Forked from ezmobius/gist:4696840
Created March 10, 2013 05:34
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save scotty1024/5127260 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save scotty1024/5127260 to your computer and use it in GitHub Desktop.
Download ZIP

Revisions

  1. ezmobius revised this gist Feb 11, 2013. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion gistfile1.txt
    View file
    Original file line number Diff line number Diff line change
    @@ -1,4 +1,4 @@
    ; Ezra's default starter Aluminatus slic3r config for hollow vessells
    # Ezra's default starter Aluminatus slic3r config for hollow vessells

    acceleration = 0
    bed_size = 300,300
  2. ezmobius revised this gist Feb 9, 2013. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion gistfile1.txt
    View file
    Original file line number Diff line number Diff line change
    @@ -6,7 +6,7 @@ bed_temperature = 0
    bridge_fan_speed = 100
    bridge_flow_ratio = 1
    bridge_speed = 70
    brim_width = 0 ; 2 is good brim width
    brim_width = 0
    complete_objects = 0
    cooling = 1
    disable_fan_first_layers = 1
  3. ezmobius created this gist Feb 2, 2013.
    89 changes: 89 additions & 0 deletions gistfile1.txt
    View file
    Original file line number Diff line number Diff line change
    @@ -0,0 +1,89 @@
    ; Ezra's default starter Aluminatus slic3r config for hollow vessells

    acceleration = 0
    bed_size = 300,300
    bed_temperature = 0
    bridge_fan_speed = 100
    bridge_flow_ratio = 1
    bridge_speed = 70
    brim_width = 0 ; 2 is good brim width
    complete_objects = 0
    cooling = 1
    disable_fan_first_layers = 1
    duplicate = 1
    duplicate_distance = 6
    duplicate_grid = 1,1
    end_gcode = G1 X0 Y0\nM104 S0 ; turn off temperature\nM140 S0; turn off heated bed\nM84; disable motors
    external_perimeter_speed = 70%
    extra_perimeters = 0
    extruder_clearance_height = 20
    extruder_clearance_radius = 20
    extruder_offset = 0x0
    extrusion_axis = E
    extrusion_multiplier = 1.0
    extrusion_width = 0
    fan_always_on =
    fan_below_layer_time = 30
    filament_diameter = 2.95
    fill_angle = 35
    fill_density = 0.0
    fill_pattern = rectilinear
    first_layer_bed_temperature = 0
    first_layer_extrusion_width = 200%
    first_layer_height = 110%
    first_layer_speed = 30%
    first_layer_temperature = 0
    g0 = 0
    gcode_arcs = 0
    gcode_comments = 0
    gcode_flavor = reprap
    infill_acceleration = 50
    infill_every_layers = 1
    infill_extruder = 1
    infill_extrusion_width = 0
    infill_speed = 100
    layer_gcode =
    layer_height = 0.15
    max_fan_speed = 100
    min_fan_speed = 35
    min_print_speed = 30
    notes =
    nozzle_diameter = 0.4
    output_filename_format = [input_filename_base].gcode
    perimeter_acceleration = 25
    perimeter_extruder = 1
    perimeter_extrusion_width = 0
    perimeter_speed = 70
    perimeters = 2
    post_process =
    print_center = 150,150
    randomize_start = 0
    retract_before_travel = 2
    retract_length = 0.85
    retract_lift = 0.0
    retract_restart_extra = 0
    retract_speed = 45
    rotate = 0
    scale = 1
    skirt_distance = 6
    skirt_height = 1
    skirts = 1
    slowdown_below_layer_time = 30
    small_perimeter_speed = 50
    solid_fill_pattern = rectilinear
    solid_infill_speed = 90
    solid_layers = 3
    start_gcode =
    support_material = 0
    support_material_angle = 0
    support_material_extruder = 1
    support_material_extrusion_width = 0
    support_material_pattern = rectilinear
    support_material_spacing = 2.5
    support_material_threshold = 45
    temperature = 0
    threads = 4
    top_solid_infill_speed = 70
    travel_speed = 110
    use_relative_e_distances = 0
    z_offset = 0