UPDATE 2023-01-22 21:34:33
This guide was last tested on an Intel MacBook 2017. Since then it's unmaintained and won't be updated (I quit the game and bought a life-time crossover licence).
This has been forked from https://gist.github.com/Alex4386/4cce275760367e9f5e90e2553d655309
For the latest discussion, see the comments there.
| # Summary | |
| A few notes I took to see if I could use MacOS as Hypevirsor in a similar fashion to Linux | |
| I wanted to see how few addons were needed instead of using Parallels, Virtual Box, VM Fsion etc. | |
| The idea is to use QEMU, Hypervisor Framework (https://developer.apple.com/documentation/hypervisor) and some custom host networking. | |
| # Installations | |
| brew install qemu (For controlling Hypervisor Framework) | |
| brew install cdrtools (For making cloud init iso's) | |
| http://tuntaposx.sourceforge.net/download.xhtml (For customer tap based networking) |
| sudo apt update | |
| # sudo apt upgrade | |
| sudo apt install -y libcurl4-openssl-dev libplist-dev libzip-dev openssl libssl-dev libusb-1.0-0-dev libreadline-dev build-essential git make automake libtool pkg-config | |
| git clone https://github.com/libimobiledevice/libirecovery | |
| git clone https://github.com/libimobiledevice/idevicerestore | |
| git clone https://github.com/libimobiledevice/usbmuxd | |
| git clone https://github.com/libimobiledevice/libimobiledevice | |
| git clone https://github.com/libimobiledevice/libusbmuxd | |
| git clone https://github.com/libimobiledevice/libplist |
| #!/usr/bin/env sh | |
| # Restarts the radio of a DD-WRT router | |
| # | |
| # Version 1.0 | |
| echo "Stopping radio" | |
| stopservice nas | |
| wl -i eth1 radio off | |
| echo "Starting radio" |
| diff --git a/platform/MCU/STM32F2xx/SPARK_Firmware_Driver/inc/usbd_mhid.h b/platform/MCU/STM32F2xx/SPARK_Firmware_Driver/inc/usbd_mhid.h | |
| index af483adc6..ca707fffc 100644 | |
| --- a/platform/MCU/STM32F2xx/SPARK_Firmware_Driver/inc/usbd_mhid.h | |
| +++ b/platform/MCU/STM32F2xx/SPARK_Firmware_Driver/inc/usbd_mhid.h | |
| @@ -6,7 +6,7 @@ | |
| #define USBD_MHID_CONFIG_DESC_SIZE 32 | |
| #define USBD_MHID_DESC_SIZE 9 | |
| -#define USBD_MHID_REPORT_DESC_SIZE 178 | |
| +#define USBD_MHID_REPORT_DESC_SIZE 45 |
| #!/bin/bash | |
| # use argument 1 as the version or get it from sw_vers | |
| os_ver=${1-:$(sw_vers -productVersion)} | |
| # string comparison | |
| if [[ "$os_ver" == 10.13.* ]]; then | |
| echo "macOS High Sierra" | |
| elif [[ "$os_ver" == 10.12.* ]]; then | |
| echo "macOS Sierra" |
| // Proxy PAC File | |
| // - Used to redirect certain addresses to the server through the SOCKS ssh port (1280 for this file), i.e. | |
| // tunnel traffic through server. | |
| // - Useful for easily accessing webpages from services running on a server (Jupyter notebooks, TensorBoard, Spark UI, etc.) | |
| // that is otherwise locked down by a firewall. | |
| // - To install on OS X/MacOS, go to "Settings->Network->Advanced->Proxies->Automatic Proxy Configuration" | |
| // and paste the local file url (`file:///absolute/path/to/proxy.pac`). | |
| // - Alternatively, use `./reinstall_proxy.sh`. | |
| // - SSH to the server with `ssh -D 1280 ....`. | |
| function FindProxyForURL(url, host) { |
Netcat is like a swiss army knife for geeks. It can be used for just about anything involving TCP or UDP. One of its most practical uses is to transfer files. Non *nix people usually don't have SSH setup, and it is much faster to transfer stuff with netcat then setup SSH. netcat is just a single executable, and works across all platforms (Windows,Mac OS X, Linux).
On the receiving (destination) terminal, run:
nc -l -p 1234 > out.file 
| This is the reverse-engineered hard-wire protocol for controlling a liftmaster garage door. | |
| OPEN - Nothing | |
| SHORT - Open/Close garage door | |
| 1µF bypass - Light on/off | |
| 22µF bypass - remote lock/unlock |