Skip to content

Instantly share code, notes, and snippets.

@mofosyne

mofosyne/front_faketec_v5.scad

Last active November 27, 2025 13:57
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save mofosyne/48c85aaf8f9d6235b8dff4756ea68b25 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save mofosyne/48c85aaf8f9d6235b8dff4756ea68b25 to your computer and use it in GitHub Desktop.
Download ZIP

Revisions

  1. mofosyne revised this gist Nov 27, 2025. 1 changed file with 1 addition and 1 deletion.
    2 changes: 1 addition & 1 deletion front_faketec_v5.scad
    View file
    Original file line number Diff line number Diff line change
    @@ -1,4 +1,4 @@
    // Faketec V5 support
    // Faketec V5 supported version of TimurTaipov's meshtastic case
    // This will modify a case by shifting the type-c port up to account for the removal of the header pins
    // Remix Source: https://www.printables.com/model/1102989-faketec-nrf52-meshtastic-case-with-encoderbuzzergp

  2. mofosyne created this gist Nov 26, 2025.
    215 changes: 215 additions & 0 deletions front_faketec_v5.scad
    View file
    Original file line number Diff line number Diff line change
    @@ -0,0 +1,215 @@
    // Faketec V5 support
    // This will modify a case by shifting the type-c port up to account for the removal of the header pins
    // Remix Source: https://www.printables.com/model/1102989-faketec-nrf52-meshtastic-case-with-encoderbuzzergp

    $fn = 60;

    top_port_enable = true;
    bottom_port_remove = true;

    // This is the size of the header pin offset
    // Dev Note: This is removed after
    header_pin_offset = 2.5;

    difference()
    {
    union()
    {
    translate([2.8,-12.75,1.95])
    rotate([-90,0,0])
    import(file = "front.stl");

    // Plug Bottom Hole
    //if (bottom_port_remove)
    union()
    {
    // Chamfer Front
    hull()
    {
    union()
    {
    translate([0,5.55/2,0])
    rotate([0,90,0])
    cylinder(h = 0.5, r1 = 5/2, r2 = (3.5 + 0.4)/2);
    translate([0,-5.55/2,0])
    rotate([0,90,0])
    cylinder(h = 0.5, r1 = 5/2, r2 = (3.5 + 0.4)/2);
    }
    }
    // Hole Cutout
    hull()
    {
    union()
    {
    translate([0,5.55/2,0])
    rotate([0,90,0])
    cylinder(h = 1.6, r = (3.5 + 0.4)/2);
    translate([0,-5.55/2,0])
    rotate([0,90,0])
    cylinder(h = 1.6, r = (3.5 + 0.4)/2);
    }
    }

    // Chamfer Back
    hull()
    {
    union()
    {
    translate([1.6,5.55/2,0])
    rotate([0,90,0])
    cylinder(h = 1, r2 = 6/2, r1 = (3.5 + 0.4)/2);
    translate([1.6,-5.55/2,0])
    rotate([0,90,0])
    cylinder(h = 1, r2 = 6/2, r1 = (3.5 + 0.4)/2);
    }
    }
    }

    }

    // Cutout
    union()
    {
    union()
    {
    // Chamfer Front
    hull()
    {
    if (top_port_enable)
    translate([-0.01,0,header_pin_offset])
    union()
    {
    translate([0,6.2/2,0.3])
    rotate([0,90,0])
    cylinder(h = 0.5, r2 = 3/2, r1 = 4/2);
    translate([0,-6.2/2,0.3])
    rotate([0,90,0])
    cylinder(h = 0.5, r2 = 3/2, r1 = 4/2);
    translate([0,6.2/2,-0.3])
    rotate([0,90,0])
    cylinder(h = 0.5, r2 = 3/2, r1 = 4/2);
    translate([0,-6.2/2,-0.3])
    rotate([0,90,0])
    cylinder(h = 0.5, r2 = 3/2, r1 = 4/2);
    }

    if (!bottom_port_remove)
    translate([-0.01,0,0])
    union()
    {
    translate([-0.01,5.55/2,0])
    rotate([0,90,0])
    cylinder(h = 0.5, r1 = 4.7/2, r2 = (3.25 + 0.4)/2);
    translate([-0.01,-5.55/2,0])
    rotate([0,90,0])
    cylinder(h = 0.5, r1 = 4.7/2, r2 = (3.25 + 0.4)/2);
    }
    }
    // Chamfer Back
    hull()
    {
    if (top_port_enable)
    translate([0,0,header_pin_offset])
    translate([2,0,0])
    union()
    {
    translate([0,6.2/2,0.3])
    rotate([0,90,0])
    cylinder(h = 0.8, r1 = 3/2, r2 = 5/2);
    translate([0,-6.2/2,0.3])
    rotate([0,90,0])
    cylinder(h = 0.8, r1 = 3/2, r2 = 5/2);
    translate([0,6.2/2,-0.3])
    rotate([0,90,0])
    cylinder(h = 0.8, r1 = 3/2, r2 = 5/2);
    translate([0,-6.2/2,-0.3])
    rotate([0,90,0])
    cylinder(h = 0.8, r1 = 3/2, r2 = 5/2);
    };

    if (!bottom_port_remove)
    translate([0,0,0])
    translate([2,0,0])
    difference()
    {
    union()
    {
    translate([0,6.2/2,0.3])
    rotate([0,90,0])
    cylinder(h = 0.8, r1 = 3/2, r2 = 5/2);
    translate([0,-6.2/2,0.3])
    rotate([0,90,0])
    cylinder(h = 0.8, r1 = 3/2, r2 = 5/2);
    translate([0,6.2/2,-0.3])
    rotate([0,90,0])
    cylinder(h = 0.8, r1 = 3/2, r2 = 5/2);
    translate([0,-6.2/2,-0.3])
    rotate([0,90,0])
    cylinder(h = 0.8, r1 = 3/2, r2 = 5/2);
    }
    translate([0,0,-2.55])
    cube([3,14,2],center=true);
    }
    }
    // Hole Cutout
    hull()
    {
    if (top_port_enable)
    translate([0,0,header_pin_offset])
    union()
    {
    translate([0,6.2/2,0.3])
    rotate([0,90,0])
    cylinder(h = 3, r = 3/2);
    translate([0,-6.2/2,0.3])
    rotate([0,90,0])
    cylinder(h = 3, r = 3/2);
    translate([0,6.2/2,-0.3])
    rotate([0,90,0])
    cylinder(h = 3, r = 3/2);
    translate([0,-6.2/2,-0.3])
    rotate([0,90,0])
    cylinder(h = 3, r = 3/2);
    }
    if (!bottom_port_remove)
    translate([0,0,0])
    union()
    {
    translate([0,6.2/2,0.3])
    rotate([0,90,0])
    cylinder(h = 3, r = 3/2);
    translate([0,-6.2/2,0.3])
    rotate([0,90,0])
    cylinder(h = 3, r = 3/2);
    translate([0,6.2/2,-0.3-0.1])
    rotate([0,90,0])
    cylinder(h = 3, r = 3/2);
    translate([0,-6.2/2,-0.3-0.1])
    rotate([0,90,0])
    cylinder(h = 3, r = 3/2);
    }
    }
    }
    }
    }

    // Main Type-C Hole Model
    if (0)
    %hull()
    {
    union()
    {
    translate([0,6.2/2,0.3])
    rotate([0,90,0])
    cylinder(h = 8, r = 3/2);
    translate([0,-6.2/2,0.3])
    rotate([0,90,0])
    cylinder(h = 8, r = 3/2);
    translate([0,6.2/2,-0.3])
    rotate([0,90,0])
    cylinder(h = 8, r = 3/2);
    translate([0,-6.2/2,-0.3])
    rotate([0,90,0])
    cylinder(h = 8, r = 3/2);
    }
    }