GUi luis-guilherme

How to update IP addressing on a Proxmox Cluster

When you change something in your network configuration, rather than its the gateway or the IP addressing, you may come under serious troubleshooting on your Proxmox Cluster, so this document will guide you into the necessary steps needed to update your network settings on Proxmox.

Note : You must follow these steps on every single node of your cluster to let it able to handle the synchronization between each node once.

So firstly, you will need to change the network interface configuration of the system; it is preferable for you to set a static IP:

/etc/network/interfaces

Warning - use at your own risk

Remove SentinelOne agent from Mac

Boot into Recovery Mode by holding Cmd+R during reboot
Open Terminal from top menubar
Run /Applications/Utilities/Disk\ Utility.app/Contents/MacOS/Disk\ Utility to open Disk Utility
If your startup disk is encrypted, use Disk Utility to mount it
In Terminal, run chroot /Volumes/Macintosh\ HD
Execute the deletion commands or script

Configure Synology NAS as Git Server

Instructions for setting up a git server on a Synology NAS with Diskstation. Specifically, I am using a DS414 with DSM 5.0.

Set Up User and Folder

Create user gituser via Diskstation interface (with File Station and WebDAV privilages)
Add new shared folder called git (located at /volume1/git) with read/write access for gituser and admin. This folder will hold all the repos.
Install Git Server package via Diskstation

	# Source: https://gist.github.com/8d941690a087b0de0e2731a52cfb1f51

	###############################################################
	# Building Event-Driven Microservices In Kubernetes With Dapr #
	# https://youtu.be/-4sHUvfk2Eg #
	###############################################################

	# Additional Info:
	# - https://dapr.io
	# - What is microservices architecture?: https://youtu.be/F-37_gV2tMs

	#!/usr/bin/env bash

	# This script generates a list of repos in a GitHub org.
	# The list can be pasted directly to a Microsoft Excel sheet.
	# You will need to use your GitHub username in the username field.
	# Update the page=N number to get the complete list of repos.
	curl --silent --user "username" "https://api.github.com/orgs/vmware/repos?page=1&per_page=100" \| npx jq '.[].html_url' \| while read repo
	do
	echo "=Hyperlink("$repo","$repo")"
	done

	$remoteport = bash.exe -c "ifconfig eth0 \| grep 'inet '"
	$found = $remoteport -match '\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}';

	if( $found ){
	$remoteport = $matches[0];
	} else{
	echo "The Script Exited, the ip address of WSL 2 cannot be found";
	exit;
	}

	version: "3"
	# Thanks to https://visibilityspots.org/dockerized-cloudflared-pi-hole.html
	# echo "alias dns-up='cd /path/to/folder; docker-compose up -d'" >> ~/.bash_profile
	services:
	dns-over-https:
	container_name: dns-over-https
	image: fardog/secureoperator:latest # google dns
	# image: visibilityspots/cloudflared:amd64 # cloudflare dns
	restart: unless-stopped
	networks:

	#! /bin/bash

	# NEWLY ADDED BACKUP FUNCTIONALITY IS NOT FULLY TESTED YET, USE WITH CARE, ESPECIALLY DELETION
	# Developed for DSM 6 - 7.0.1. Not tested on other versions.
	# Steps to install
	# Save this script in one of your shares
	# Edit it according to your requirements
	# Backup /usr/syno/share/nginx/ as follows:
	# # cd /usr/syno/share/
	# # tar cvf ~/nginx.tar nginx

	#cloud-config

	hostname: yourcorename

	coreos:
	etcd:
	addr: $public_ipv4:4001
	peer-addr: $private_ipv4:7001
	units:
	- name: etcd.service