Skip to content

Instantly share code, notes, and snippets.

@lucmann

lucmann/gist:1e6b5fc8cafd2c9cb8c285f221ffeab1

Created March 20, 2026 22:12
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save lucmann/1e6b5fc8cafd2c9cb8c285f221ffeab1 to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save lucmann/1e6b5fc8cafd2c9cb8c285f221ffeab1 to your computer and use it in GitHub Desktop.
Download ZIP
adv7511->powered 0 at adv7511_probe done
Raw
gistfile1.txt
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.19.0-rc6-g741c3ee0674f-dirty (luc@vostro) (aarch64-linux-gnu-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44) #75 SMP PREEMPT Sat Mar 21 06:04:04 CST 2026
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: HiKey970
[ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '115200')
[ 0.000000] printk: legacy bootconsole [pl11] enabled
[ 0.000000] efi: EFI v2.6 by EDK II
[ 0.000000] efi: MEMATTR=0xbe637018 MEMRESERVE=0xba404c18
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000032200000, size 128 MiB
[ 0.000000] OF: reserved mem: initialized node drm_dma_mem_region, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000032200000..0x000000003a1fffff (131072 KiB) map reusable drm_dma_mem_region
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000167fffff]
[ 0.000000] node 0: [mem 0x0000000016988000-0x00000000209fffff]
[ 0.000000] node 0: [mem 0x0000000020b00000-0x00000000320fffff]
[ 0.000000] node 0: [mem 0x0000000032101000-0x000000008e0fffff]
[ 0.000000] node 0: [mem 0x000000008e240000-0x00000000ba3effff]
[ 0.000000] node 0: [mem 0x00000000ba3f0000-0x00000000ba3fffff]
[ 0.000000] node 0: [mem 0x00000000ba400000-0x00000000ba438fff]
[ 0.000000] node 0: [mem 0x00000000ba439000-0x00000000ba43cfff]
[ 0.000000] node 0: [mem 0x00000000ba43d000-0x00000000ba44ffff]
[ 0.000000] node 0: [mem 0x00000000ba450000-0x00000000ba68ffff]
[ 0.000000] node 0: [mem 0x00000000ba690000-0x00000000bf65ffff]
[ 0.000000] node 0: [mem 0x00000000bf660000-0x00000000bf69ffff]
[ 0.000000] node 0: [mem 0x00000000bf6a0000-0x00000000bf6affff]
[ 0.000000] node 0: [mem 0x00000000bf6b0000-0x00000000bf6fffff]
[ 0.000000] node 0: [mem 0x00000000bf700000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001bfffffff]
[ 0.000000] On node 0, zone DMA: 392 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 256 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 320 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 23 pages/cpu s56088 r8192 d29928 u94208
[ 0.000000] pcpu-alloc: s56088 r8192 d29928 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: BOOT_IMAGE=/Image-hikey970-v6.19.0-rc2.gz drm.debug=0x3f earlycon=pl011,0xfff32000,115200 clk_ignore_unused=true console=tty0 console=ttyAMA6,115200n8 root=/dev/mmcblk0p2 rootwait rw debug loglevel=8 efi=noruntime dw_mmc.debug=1
[ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] printk: log_buf_len total cpu_extra contributions: 28672 bytes
[ 0.000000] printk: log_buf_len min size: 16384 bytes
[ 0.000000] printk: log buffer data + meta data: 65536 + 229376 = 294912 bytes
[ 0.000000] printk: early log buf free: 12888(78%)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] software IO TLB: area num 8.
[ 0.000000] software IO TLB: mapped [mem 0x00000000b0200000-0x00000000b4200000] (64MB)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1571895
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer running at 1.92MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
[ 0.000001] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
[ 0.008984] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
[ 0.019190] pid_max: default: 32768 minimum: 301
[ 0.023977] SELinux: Initializing.
[ 0.027866] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.035533] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.044560] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.051390] rcu: Hierarchical SRCU implementation.
[ 0.056231] rcu: Max phase no-delay instances is 1000.
[ 0.061659] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.070576] EFI runtime services will be disabled.
[ 0.075663] smp: Bringing up secondary CPUs ...
[ 0.080745] Detected VIPT I-cache on CPU1
[ 0.080810] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.081357] Detected VIPT I-cache on CPU2
[ 0.081391] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.081879] Detected VIPT I-cache on CPU3
[ 0.081911] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.083009] CPU features: detected: Spectre-v2
[ 0.083017] CPU features: detected: Spectre-v4
[ 0.083020] CPU features: detected: Spectre-BHB
[ 0.083023] CPU features: detected: ARM erratum 858921
[ 0.083028] Detected VIPT I-cache on CPU4
[ 0.083057] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.083067] arch_timer: CPU4: Trapping CNTVCT access
[ 0.083073] CPU4: Booted secondary processor 0x0000000100 [0x410fd092]
[ 0.083572] Detected VIPT I-cache on CPU5
[ 0.083591] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.083596] arch_timer: CPU5: Trapping CNTVCT access
[ 0.083600] CPU5: Booted secondary processor 0x0000000101 [0x410fd092]
[ 0.084075] Detected VIPT I-cache on CPU6
[ 0.084094] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.084099] arch_timer: CPU6: Trapping CNTVCT access
[ 0.084104] CPU6: Booted secondary processor 0x0000000102 [0x410fd092]
[ 0.084619] Detected VIPT I-cache on CPU7
[ 0.084638] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.084643] arch_timer: CPU7: Trapping CNTVCT access
[ 0.084647] CPU7: Booted secondary processor 0x0000000103 [0x410fd092]
[ 0.084698] smp: Brought up 1 node, 8 CPUs
[ 0.229139] SMP: Total of 8 processors activated.
[ 0.233897] CPU: All CPU(s) started at EL2
[ 0.238067] CPU features: detected: 32-bit EL0 Support
[ 0.243259] CPU features: detected: 32-bit EL1 Support
[ 0.248460] CPU features: detected: CRC32 instructions
[ 0.253657] CPU features: detected: PMUv3
[ 0.257747] alternatives: applying system-wide alternatives
[ 0.264561] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.273303] Memory: 5926572K/6287580K available (17088K kernel code, 2190K rwdata, 9432K rodata, 3072K init, 361K bss, 225888K reserved, 131072K cma-reserved)
[ 0.289932] devtmpfs: initialized
[ 0.297967] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.307855] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.315434] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
[ 0.326122] 24672 pages in range for non-PLT usage
[ 0.326135] 516192 pages in range for PLT usage
[ 0.331840] regulator-dummy: 2147483647 mW budge, enabled
[ 0.342079] DMI not present or invalid.
[ 0.347715] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.354583] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.361980] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.369920] audit: initializing netlink subsys (disabled)
[ 0.375539] audit: type=2000 audit(0.248:1): state=initialized audit_enabled=0 res=1
[ 0.376767] thermal_sys: Registered thermal governor 'fair_share'
[ 0.383402] cpuidle: using governor ladder
[ 0.393711] cpuidle: using governor menu
[ 0.397828] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.404796] ASID allocator initialised with 65536 entries
[ 0.410878] Serial: AMBA PL011 UART driver
[ 0.428210] /dpe@e8600000: Fixed dependency cycle(s) with /dsi@e8601000
[ 0.434949] /soc/i2c@fdf0d000/adv7533@39: Fixed dependency cycle(s) with /dsi@e8601000
[ 0.443005] /dsi@e8601000: Fixed dependency cycle(s) with /soc/i2c@fdf0d000/adv7533@39
[ 0.451019] /dsi@e8601000: Fixed dependency cycle(s) with /dpe@e8600000
[ 0.459051] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.465919] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.472259] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.479120] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.485454] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.492312] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.498645] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.505505] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.512887] ACPI: Interpreter disabled.
[ 0.517254] iommu: Default domain type: Translated
[ 0.517466] fixed-3.3V: 3300 mV 2147483647 mW budge, enabled
[ 0.522101] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.527965] reg-fixed-voltage regulator-3v3: fixed-3.3V supplying 3300000uV
[ 0.541476] SCSI subsystem initialized
[ 0.545365] libata version 3.00 loaded.
[ 0.549477] usbcore: registered new interface driver usbfs
[ 0.555048] usbcore: registered new interface driver hub
[ 0.560441] usbcore: registered new device driver usb
[ 0.565691] mc: Linux media interface: v0.10
[ 0.570035] videodev: Linux video capture interface: v2.00
[ 0.575627] pps_core: LinuxPPS API ver. 1 registered
[ 0.580644] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.589884] PTP clock support registered
[ 0.594316] Advanced Linux Sound Architecture Driver Initialized.
[ 0.601129] Bluetooth: Core ver 2.22
[ 0.604761] NET: Registered PF_BLUETOOTH protocol family
[ 0.610131] Bluetooth: HCI device and connection manager initialized
[ 0.616561] Bluetooth: HCI socket layer initialized
[ 0.621495] Bluetooth: L2CAP socket layer initialized
[ 0.626622] Bluetooth: SCO socket layer initialized
[ 0.631843] vgaarb: loaded
[ 0.634880] clocksource: Switched to clocksource arch_sys_counter
[ 0.641253] VFS: Disk quotas dquot_6.6.0
[ 0.645234] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.652474] pnp: PnP ACPI: disabled
[ 0.656677] NET: Registered PF_INET protocol family
[ 0.661826] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.673363] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.682066] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.689910] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.698211] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.707096] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.713837] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.720885] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.728537] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.735222] PCI: CLS 0 bytes, default 64
[ 0.743095] kvm [1]: nv: 568 coarse grained trap handlers
[ 0.748986] kvm [1]: IPA Size Limit: 40 bits
[ 0.755014] kvm [1]: vgic interrupt IRQ9
[ 0.759007] kvm [1]: Hyp nVHE mode initialized successfully
[ 0.766009] Initialise system trusted keyrings
[ 0.770630] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 0.777385] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.783295] fuse: init (API version 7.45)
[ 0.787454] 9p: Installing v9fs 9p2000 file system support
[ 0.793558] cryptd: max_cpu_qlen set to 1000
[ 0.838639] Key type asymmetric registered
[ 0.842782] Asymmetric key parser 'x509' registered
[ 0.847756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.855234] io scheduler mq-deadline registered
[ 0.859813] io scheduler kyber registered
[ 0.863896] io scheduler bfq registered
[ 0.870315] pinctrl-single e896c000.pinmux: 459 pins, size 1836
[ 0.877076] pinctrl-single fff11000.pinmux: 463 pins, size 1852
[ 0.883602] pinctrl-single e896c800.pinmux: 459 pins, size 1836
[ 0.889908] pinctrl-single fc182000.pinmux: 10 pins, size 40
[ 0.895771] pinctrl-single fc182800.pinmux: 10 pins, size 40
[ 0.901647] pinctrl-single ff37e000.pinmux: 12 pins, size 48
[ 0.907517] pinctrl-single ff37e800.pinmux: 12 pins, size 48
[ 0.913806] pinctrl-single fff11800.pinmux: 463 pins, size 1852
[ 0.922162] pl061_gpio e8a0b000.gpio: PL061 GPIO chip registered
[ 0.928554] pl061_gpio e8a0c000.gpio: PL061 GPIO chip registered
[ 0.934935] pl061_gpio e8a0d000.gpio: PL061 GPIO chip registered
[ 0.941303] pl061_gpio e8a0e000.gpio: PL061 GPIO chip registered
[ 0.947664] pl061_gpio e8a0f000.gpio: PL061 GPIO chip registered
[ 0.954036] pl061_gpio e8a10000.gpio: PL061 GPIO chip registered
[ 0.960516] pl061_gpio e8a11000.gpio: PL061 GPIO chip registered
[ 0.966890] pl061_gpio e8a12000.gpio: PL061 GPIO chip registered
[ 0.973263] pl061_gpio e8a13000.gpio: PL061 GPIO chip registered
[ 0.979643] pl061_gpio e8a14000.gpio: PL061 GPIO chip registered
[ 0.986028] pl061_gpio e8a15000.gpio: PL061 GPIO chip registered
[ 0.992398] pl061_gpio e8a16000.gpio: PL061 GPIO chip registered
[ 0.998769] pl061_gpio e8a17000.gpio: PL061 GPIO chip registered
[ 1.005140] pl061_gpio e8a18000.gpio: PL061 GPIO chip registered
[ 1.011498] pl061_gpio e8a19000.gpio: PL061 GPIO chip registered
[ 1.017871] pl061_gpio e8a1a000.gpio: PL061 GPIO chip registered
[ 1.024244] pl061_gpio e8a1b000.gpio: PL061 GPIO chip registered
[ 1.030613] pl061_gpio e8a1c000.gpio: PL061 GPIO chip registered
[ 1.037006] pl061_gpio fff28000.gpio: PL061 GPIO chip registered
[ 1.043443] pl061_gpio fff29000.gpio: PL061 GPIO chip registered
[ 1.049820] pl061_gpio e8a1f000.gpio: PL061 GPIO chip registered
[ 1.056200] pl061_gpio e8a20000.gpio: PL061 GPIO chip registered
[ 1.062606] pl061_gpio fff0b000.gpio: PL061 GPIO chip registered
[ 1.068988] pl061_gpio fff0c000.gpio: PL061 GPIO chip registered
[ 1.075375] pl061_gpio fff0d000.gpio: PL061 GPIO chip registered
[ 1.081867] pl061_gpio fff0e000.gpio: PL061 GPIO chip registered
[ 1.088243] pl061_gpio fff0f000.gpio: PL061 GPIO chip registered
[ 1.094485] pl061_gpio fff10000.gpio: PL061 GPIO chip registered
[ 1.100719] pl061_gpio fff1d000.gpio: PL061 GPIO chip registered
[ 1.107458] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.119379] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.126709] msm_serial: driver initialized
[ 1.130900] SuperH (H)SCI(F) driver initialized
[ 1.135916] [drm:drm_core_init] Initialized
[ 1.143715] brd: module loaded
[ 1.149214] loop: module loaded
[ 1.154059] tun: Universal TUN/TAP device driver, 1.6
[ 1.159314] CAN device driver interface
[ 1.163438] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.168480] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.173348] ldo3: 1500 <--> 2000 mV at 1800 mV 2147483647 mW budge, enabled
[ 1.174476] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.186932] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.192575] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.198906] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.201830] ldo4: 1725 <--> 1900 mV at 1800 mV 2147483647 mW budge, enabled
[ 1.204898] sky2: driver version 1.30
[ 1.215717] PPP generic driver version 2.4.2
[ 1.220097] PPP BSD Compression module registered
[ 1.224857] PPP Deflate Compression module registered
[ 1.229957] PPP MPPE Compression module registered
[ 1.232503] ldo9: 1750 <--> 3300 mV at 2950 mV 2147483647 mW budge, enabled
[ 1.234851] usbcore: registered new interface driver asix
[ 1.247287] usbcore: registered new interface driver ax88179_178a
[ 1.253456] usbcore: registered new interface driver cdc_ether
[ 1.259361] usbcore: registered new interface driver net1080
[ 1.262412] ldo15: 1800 <--> 3000 mV at 2950 mV 2147483647 mW budge, enabled
[ 1.265092] usbcore: registered new interface driver cdc_subset
[ 1.278182] usbcore: registered new interface driver zaurus
[ 1.283824] usbcore: registered new interface driver cdc_ncm
[ 1.289678] VFIO - User Level meta-driver version: 0.3
[ 1.292778] ldo16: 1800 <--> 3000 mV at 2950 mV 2147483647 mW budge, enabled
[ 1.295725] usbcore: registered new interface driver usb-storage
[ 1.302110] ldo17: 2500 <--> 3300 mV at 2500 mV 2147483647 mW budge, disabled
[ 1.308529] mousedev: PS/2 mouse device common for all mice
[ 1.315334] ldo33: 2500 <--> 3300 mV at 2500 mV 2147483647 mW budge, disabled
[ 1.320944] usbcore: registered new interface driver xpad
[ 1.328206] ldo34: 2600 <--> 3300 mV at 2600 mV 2147483647 mW budge, disabled
[ 1.333570] usbcore: registered new interface driver usb_acecad
[ 1.346825] usbcore: registered new interface driver aiptek
[ 1.352570] usbcore: registered new interface driver hanwang
[ 1.358345] usbcore: registered new interface driver kbtab
[ 1.364641] i2c_dev: i2c /dev entries driver
[ 1.369599] usbcore: registered new interface driver uvcvideo
[ 1.376236] device-mapper: uevent: version 1.0.3
[ 1.381035] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[ 1.390118] Bluetooth: HCI UART driver ver 2.3
[ 1.394613] Bluetooth: HCI UART protocol H4 registered
[ 1.400035] sdhci: Secure Digital Host Controller Interface driver
[ 1.406284] sdhci: Copyright(c) Pierre Ossman
[ 1.410753] Synopsys Designware Multimedia Card Interface Driver
[ 1.417137] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.417266] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
[ 1.423236] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[ 1.435158] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
[ 1.443695] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
[ 1.450556] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
[ 1.460918] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 1.467331] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
[ 1.477791] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[ 1.483175] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 43,32 bit host data width,256 deep fifo
[ 1.493707] ufshcd-hisi ff3c0000.ufs: invalid ref_clk setting = 3200000
[ 1.503135] dwmmc_k3 ff37f000.dwmmc1: Looking up vmmc-supply from device node /soc/dwmmc1@ff37f000
[ 1.518885] dwmmc_k3 ff37f000.dwmmc1: Looking up vqmmc-supply from device node /soc/dwmmc1@ff37f000
[ 1.528071] dwmmc_k3 ff37f000.dwmmc1: Looking up vqmmc2-supply from device node /soc/dwmmc1@ff37f000
[ 1.537307] dwmmc_k3 ff37f000.dwmmc1: Looking up vqmmc2-supply property in node /soc/dwmmc1@ff37f000 failed
[ 1.538880] scsi host0: ufshcd
[ 1.547220] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
[ 1.570028] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.594015] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.594250] hid: raw HID events driver (C) Jiri Kosina
[ 1.603870] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.610181] usbcore: registered new interface driver usbhid
[ 1.617686] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.621899] usbhid: USB HID core driver
[ 1.622049] [drm] the device node is dpe
[ 1.631816] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.634318] [drm] the device remote node is dsi
[ 1.639585] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 1.639611] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.640916] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 1.640951] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.640981] sd 0:0:0:1: [sdb] Write Protect is off
[ 1.640987] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
[ 1.641096] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.641147] sd 0:0:0:1: [sdb] Preferred minimum I/O size 8192 bytes
[ 1.641151] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
[ 1.642245] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
[ 1.642300] sd 0:0:0:2: [sdc] Write Protect is off
[ 1.642303] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
[ 1.642331] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.642405] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.642454] sd 0:0:0:2: [sdc] Preferred minimum I/O size 8192 bytes
[ 1.642457] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
[ 1.643622] sd 0:0:0:3: [sdd] 15616000 4096-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.643679] sd 0:0:0:3: [sdd] Write Protect is off
[ 1.643685] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
[ 1.643786] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.643833] sd 0:0:0:3: [sdd] Preferred minimum I/O size 8192 bytes
[ 1.643839] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
[ 1.647196] [drm] dsi cur_client is 1 <0->hdmi;1->panel>
[ 1.651076] sd 0:0:0:0: [sda] Write Protect is off
[ 1.658496] [drm:dsi_probe] dss_dphy0_ref_clk:[19200000]->[19200000].
[ 1.666608] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
[ 1.778877] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 200000000Hz, actual 150000000HZ div = 0)
[ 1.785729] [drm:dsi_probe] dss_dphy0_cfg_clk:[19200000]->[19200000].
[ 1.785819] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.785868] sd 0:0:0:0: [sda] Preferred minimum I/O size 8192 bytes
[ 1.785874] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
[ 1.791263] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 1.864285] u32 classifier
[ 1.867027] input device check on
[ 1.870721] Actions configured
[ 1.875745] xt_time: kernel timezone is -0000
[ 1.876923] dwmmc_k3 ff37f000.dwmmc1: tuning ok best_clksmpl 11 tuning_sample_flag bff3fff3
[ 1.880258] Initializing XFRM netlink socket
[ 1.880723] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 1.880727] GPT:7805956 != 15615999
[ 1.880731] GPT:Alternate GPT header not at the end of the disk.
[ 1.880733] GPT:7805956 != 15615999
[ 1.880736] GPT: Use GNU Parted to correct GPT errors.
[ 1.880766] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 sdd15
[ 1.882213] sd 0:0:0:3: [sdd] Attached SCSI disk
[ 1.883076] sd 0:0:0:2: [sdc] Attached SCSI disk
[ 1.888591] mmc0: new UHS-I speed SDR104 SDHC card at address aaaa
[ 1.892975] NET: Registered PF_INET6 protocol family
[ 1.900641] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[ 1.904584] Segment Routing with IPv6
[ 1.911205] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.913518] In-situ OAM (IOAM) with IPv6
[ 1.915332] mmcblk0: p1 p2
[ 1.967886] mip6: Mobile IPv6
[ 1.970913] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.977346] NET: Registered PF_PACKET protocol family
[ 1.982454] PFKEY is deprecated and scheduled to be removed in 2027, please contact the netdev mailing list
[ 1.992307] NET: Registered PF_KEY protocol family
[ 1.997150] can: controller area network core
[ 2.001575] NET: Registered PF_CAN protocol family
[ 2.006419] can: raw protocol
[ 2.009419] can: broadcast manager protocol
[ 2.013649] can: netlink gateway - max_hops=1
[ 2.018123] Bluetooth: RFCOMM TTY layer initialized
[ 2.023065] Bluetooth: RFCOMM socket layer initialized
[ 2.028283] Bluetooth: RFCOMM ver 1.11
[ 2.032103] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.038094] Bluetooth: HIDP socket layer initialized
[ 2.043454] 9pnet: Installing 9P2000 support
[ 2.059334] registered taskstats version 1
[ 2.063510] Loading compiled-in X.509 certificates
[ 2.091485] fdf02000.serial: ttyAMA0 at MMIO 0xfdf02000 (irq = 46, base_baud = 0) is a PL011 rev2
[ 2.100858] fdf03000.serial: ttyAMA2 at MMIO 0xfdf03000 (irq = 47, base_baud = 0) is a PL011 rev2
[ 2.110085] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 48, base_baud = 0) is a PL011 rev2
[ 2.119086] printk: console [ttyAMA6] enabled
[ 2.119086] printk: console [ttyAMA6] enabled
[ 2.127914] printk: legacy bootconsole [pl11] disabled
[ 2.127914] printk: legacy bootconsole [pl11] disabled
[ 2.139875] wlan-en-regulator: 1800 mV 2147483647 mW budge, disabled
[ 2.139950] reg-fixed-voltage wlan-en-1-8v: wlan-en-regulator supplying 1800000uV
[ 2.140328] adv7511 0-0039: adv7511_probe enter
[ 2.140332] adv7511 0-0039: adv7511_probe alloc
[ 2.140341] adv7511 0-0039: adv7511_probe find bridge
[ 2.140353] adv7511 0-0039: Looking up avdd-supply from device node /soc/i2c@fdf0d000/adv7533@39
[ 2.140404] adv7511 0-0039: Looking up dvdd-supply from device node /soc/i2c@fdf0d000/adv7533@39
[ 2.140432] adv7511 0-0039: Looking up pvdd-supply from device node /soc/i2c@fdf0d000/adv7533@39
[ 2.140449] adv7511 0-0039: Looking up a2vdd-supply from device node /soc/i2c@fdf0d000/adv7533@39
[ 2.140466] adv7511 0-0039: Looking up v3p3-supply from device node /soc/i2c@fdf0d000/adv7533@39
[ 2.140508] adv7511 0-0039: Looking up v1p2-supply from device node /soc/i2c@fdf0d000/adv7533@39
[ 2.140553] adv7511 0-0039: adv7511_probe init regulator ok
[ 2.198948] adv7511 0-0039: adv7511_probe init i2c ok
[ 2.211918] adv7511 0-0039: Rev. 20
[ 2.235391] adv7511 0-0039: adv7511_probe i2c new ancillary device edid
[ 2.242153] adv7511 0-0039: adv7511_probe i2c new ancillary device packet
[ 2.249957] adv7511 0-0039: adv7511_probe power off
[ 2.254945] adv7511 0-0039: drm_bridge_add
[ 2.255114] [drm] luc Initialized kirin9xx 1.0.0 on minor 0
[ 2.755294] [drm] dss irq = 51.
[ 2.755302] kirin9xx-drm e8600000.dpe: Looking up ldo3-supply from device node /dpe@e8600000
[ 2.755401] [drm] dsi_bind
[ 2.755404] kirin9xx-dw-dsi e8601000.dsi: dw_drm_encoder_init:
[ 2.775448] kirin9xx-drm e8600000.dpe: bound e8601000.dsi (ops dsi_ops)
[ 2.775507] [drm] 1 adv7511 detect
[ 2.785743] [drm] 2 adv7511 detect status 1, hpd 1, powered 0
[ 2.791596] [drm] 3 adv7511 status 1, powered 0
[ 2.999236] kirin9xx-drm e8600000.dpe: [drm:check_connector_changed] [CONNECTOR:37:HDMI-A-1] status updated from unknown to connected
[ 2.999260] kirin9xx-drm e8600000.dpe: [drm:check_connector_changed] [CONNECTOR:37:HDMI-A-1] Changed epoch counter 0 => 1
[ 2.999267] [drm:drm_mode_object_get] OBJ ID: 37 (2)
[ 2.999276] kirin9xx-drm e8600000.dpe: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:37:HDMI-A-1] generating connector hotplug event
[ 2.999300] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2)
[ 2.999305] [drm] kirin_drm_kms_init ok
[ 2.999331] [drm:drm_minor_register]
[ 2.999458] [drm:drm_minor_register] new minor registered 128
[ 2.999464] [drm:drm_minor_register]
[ 2.999555] [drm:drm_minor_register] new minor registered 0
[ 2.999568] [drm:drm_minor_register]
[ 2.999615] kirin9xx-drm e8600000.dpe: [drm:drm_sysfs_connector_add] [CONNECTOR:37:HDMI-A-1] adding connector to sysfs
[ 2.999734] kirin9xx-drm e8600000.dpe: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:37:HDMI-A-1] generating connector hotplug event
[ 3.011289] [drm] Initialized kirin9xx 1.0.0 for e8600000.dpe on minor 0
[ 3.011323] kirin9xx-drm e8600000.dpe: [drm:drm_client_modeset_probe]
[ 3.011333] [drm:drm_mode_object_get] OBJ ID: 37 (2)
[ 3.011345] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1]
[ 3.011358] [drm] 1 adv7511 detect
[ 3.045140] [drm] 2 adv7511 detect status 1, hpd 0, powered 0
[ 3.052644] [drm] 3 adv7511 status 1, powered 0
[ 3.141880] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] CEA VCDB 0xd5
[ 3.141897] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 360000 kHz
[ 3.141908] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] HDMI sink does deep color 30.
[ 3.141918] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] Assigning HDMI sink color depth as 10 bpc.
[ 3.141928] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] HDMI sink does YCRCB444 in deep color.
[ 3.141936] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] HDMI sink should do DC_36, but does not!
[ 3.141949] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] ELD monitor Sculptor
[ 3.141959] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
[ 3.141970] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] ELD size 32, SAD count 1
[ 3.142235] [drm] Valid mode: 1920x1080@60, clock 148500 (adjusted to 144000)
[ 3.142272] [drm] Valid mode: 1920x1080@50, clock 117000 (adjusted to 117000)
[ 3.142307] [drm] Valid mode: 1152x864@60, clock 81579 (adjusted to 81579)
[ 3.142312] [drm] Valid mode: 1280x720@60, clock 74250 (adjusted to 72000)
[ 3.142347] [drm] Valid mode: 1280x1024@60, clock 108000 (adjusted to 108000)
[ 3.142381] [drm] Valid mode: 1600x900@60, clock 108000 (adjusted to 108000)
[ 3.142415] [drm] Valid mode: 800x600@60, clock 40000 (adjusted to 40000)
[ 3.142450] [drm] Valid mode: 1024x768@60, clock 65000 (adjusted to 65000)
[ 3.142457] [drm] Valid mode: 1920x1080@60, clock 148500 (adjusted to 144000)
[ 3.142465] [drm] Valid mode: 1280x720@50, clock 74250 (adjusted to 72000)
[ 3.142470] [drm] Valid mode: 1280x720@60, clock 74250 (adjusted to 72000)
[ 3.142480] [drm] Valid mode: 1920x1080@50, clock 148500 (adjusted to 144000)
[ 3.142486] [drm] Valid mode: 1280x720@60, clock 74176 (adjusted to 74176)
[ 3.142494] [drm] Valid mode: 1920x1080@60, clock 148352 (adjusted to 148352)
[ 3.142505] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] probed modes:
[ 3.142516] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1082 1087 1125 0x48 0x5
[ 3.142528] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[ 3.142540] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[ 3.142552] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
[ 3.142565] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 117000 1920 2008 2052 2080 1080 1084 1089 1125 0x40 0x5
[ 3.142577] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
[ 3.142588] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 3.142600] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 60 81579 1152 1216 1336 1520 864 865 868 895 0x0 0x6
[ 3.142612] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 3.142624] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 3.142636] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 3.142648] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
[ 3.142660] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 3.142672] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 3.142685] kirin9xx-drm e8600000.dpe: [drm:drm_client_modeset_probe] [CONNECTOR:37:HDMI-A-1] enabled? yes
[ 3.142700] kirin9xx-drm e8600000.dpe: [drm:drm_client_modeset_probe] Not using firmware configuration
[ 3.142713] kirin9xx-drm e8600000.dpe: [drm:drm_client_modeset_probe] [CONNECTOR:37:HDMI-A-1] found preferred mode: 1920x1080
[ 3.142723] kirin9xx-drm e8600000.dpe: [drm:drm_client_modeset_probe] picking CRTCs for 2048x2048 config
[ 3.142735] kirin9xx-drm e8600000.dpe: [drm:drm_client_modeset_probe] [CRTC:35:crtc-0] desired mode 1920x1080 set (0,0)
[ 3.142745] [drm:drm_mode_object_get] OBJ ID: 37 (2)
[ 3.142753] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (3)
[ 3.142766] kirin9xx-drm e8600000.dpe: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
[ 3.142782] kirin9xx-drm e8600000.dpe: [drm:drm_fbdev_dma_driver_fbdev_probe] surface width(1920), height(1080) and bpp(32)
[ 3.153070] kirin9xx-drm e8600000.dpe: [drm:drm_mode_addfb2] [FB:40]
[ 3.153080] [drm:drm_mode_object_put.part.0] OBJ ID: 40 (2)
[ 3.153230] kirin9xx-drm e8600000.dpe: [drm] fb0: kirin9xxdrmfb frame buffer device
[ 3.153236] [drm] Initialized kirin9xx 1.0.0 on minor 0
[ 3.153244] [drm] host attach, client name=[adv7533], id=0
[ 3.153252] adv7511 0-0039: adv7511_probe attach dsi ok
[ 3.153256] [drm] adv7511_probe status 1, powered 0, ok???
[ 3.156165] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 3.157035] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 3.157380] dwmmc_k3 fc183000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[ 3.157520] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 3.157598] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
[ 3.157606] cfg80211: failed to load regulatory.db
[ 3.157764] clk: Not disabling unused clocks
[ 3.157768] PM: genpd: Disabling unused power domains
[ 3.157776] ALSA device list:
[ 3.157779] No soundcards found.
[ 3.159558] dwmmc_k3 fc183000.dwmmc2: IDMAC supports 64-bit address mode.
[ 3.159583] dwmmc_k3 fc183000.dwmmc2: Using internal DMA controller.
[ 3.159592] dwmmc_k3 fc183000.dwmmc2: Version ID is 270a
[ 3.159637] dwmmc_k3 fc183000.dwmmc2: DW MMC controller at irq 52,32 bit host data width,256 deep fifo
[ 3.159718] dwmmc_k3 fc183000.dwmmc2: Looking up vmmc-supply from device node /soc/dwmmc2@fc183000
[ 3.159852] dwmmc_k3 fc183000.dwmmc2: Looking up vqmmc-supply from device node /soc/dwmmc2@fc183000
[ 3.159863] dwmmc_k3 fc183000.dwmmc2: Looking up vqmmc-supply property in node /soc/dwmmc2@fc183000 failed
[ 3.159881] dwmmc_k3 fc183000.dwmmc2: Looking up vqmmc2-supply from device node /soc/dwmmc2@fc183000
[ 3.159889] dwmmc_k3 fc183000.dwmmc2: Looking up vqmmc2-supply property in node /soc/dwmmc2@fc183000 failed
[ 3.159944] mmc_host mmc1: card is non-removable.
[ 3.212500] check access for rdinit=/init failed: -2, ignoring
[ 3.249449] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.268938] dwmmc_k3 fc183000.dwmmc2: card claims to support voltages below defined range
[ 3.280349] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 3.281972] mmc1: new SDIO card at address 0001
[ 3.283319] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[ 3.283354] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
[ 3.283359] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
[ 3.283363] wlcore: WARNING falling back to default config
[ 3.396977] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.426883] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 3.516958] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.546877] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 3.751353] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[ 3.753921] wlcore: loaded
[ 3.823012] EXT4-fs (mmcblk0p2): recovery complete
[ 3.832376] EXT4-fs (mmcblk0p2): mounted filesystem 569fe59e-63c3-4eaf-914a-ebf82f1afe59 r/w with ordered data mode. Quota mode: none.
[ 3.832469] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 3.833845] devtmpfs: mounted
[ 3.834762] Freeing unused kernel memory: 3072K
[ 3.834862] Run /sbin/init as init process
[ 3.834866] with arguments:
[ 3.834867] /sbin/init
[ 3.834883] with environment:
[ 3.834885] HOME=/
[ 3.834887] TERM=linux
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment