loifarn · February 13, 2018 15:30 · Feb 13, 2018 · Feb 13, 2018 · Feb 13, 2018 · Feb 13, 2018
diff --git a/arch-linux-install b/arch-linux-install
@@ -55,7 +55,7 @@ mount /dev/sdX1 /mnt/boot/efi
 
 # Install the system also includes stuff needed for starting wifi when first booting into the newly installed system
 # Unless vim and zsh are desired these can be removed from the command
-pacstrap /mnt base base-devel grub-efi-x86_64 zsh nano git efibootmgr dialog wpa_supplicant sudo net-tools
+pacstrap /mnt base base-devel grub-efi-x86_64 zsh nano git efibootmgr dialog wpa_supplicant sudo net-tools networkmanager network-manager-applet-indicator
 
 ## GUI
 pacstrap /mnt gnome xorg-server xorg-xinit xterm ttf-dejavu alsa-utils 

diff --git a/arch-linux-install b/arch-linux-install
@@ -55,7 +55,7 @@ mount /dev/sdX1 /mnt/boot/efi
 
 # Install the system also includes stuff needed for starting wifi when first booting into the newly installed system
 # Unless vim and zsh are desired these can be removed from the command
-pacstrap /mnt base base-devel grub-efi-x86_64 zsh nano git efibootmgr dialog wpa_supplicant sudo
+pacstrap /mnt base base-devel grub-efi-x86_64 zsh nano git efibootmgr dialog wpa_supplicant sudo net-tools
 
 ## GUI
 pacstrap /mnt gnome xorg-server xorg-xinit xterm ttf-dejavu alsa-utils 

diff --git a/arch-linux-install b/arch-linux-install
@@ -55,10 +55,10 @@ mount /dev/sdX1 /mnt/boot/efi
 
 # Install the system also includes stuff needed for starting wifi when first booting into the newly installed system
 # Unless vim and zsh are desired these can be removed from the command
-pacstrap /mnt base base-devel grub-efi-x86_64 zsh nano git efibootmgr dialog wpa_supplicant 
+pacstrap /mnt base base-devel grub-efi-x86_64 zsh nano git efibootmgr dialog wpa_supplicant sudo
 
 ## GUI
-pacstrap /mnt gnome xorg-server xorg-xinit xterm ttf-dejavu alsa-utils
+pacstrap /mnt gnome xorg-server xorg-xinit xterm ttf-dejavu alsa-utils 
 
 # 'install' fstab
 genfstab -pU /mnt >> /mnt/etc/fstab
@@ -84,9 +84,9 @@ echo LC_ALL=C >> /etc/locale.conf
 # Set password for root
 passwd
 
-# Add real user remove -s flag if you don't whish to use zsh
-# useradd -m -g users -G wheel -s /bin/zsh MYUSERNAME
-# passwd MYUSERNAME
+# Add real
+useradd -m -g users -G wheel,storage,power -s /bin/bash johndoe
+passwd johndoe
 
 # Configure mkinitcpio with modules needed for the initrd image
 nano /etc/mkinitcpio.conf
@@ -113,4 +113,20 @@ reboot
 
 # Enable gnome
 systemctl enable gdm.service
-reboot
+reboot
+
+## AFTER WORK
+# Give sudo perms
+EDITOR=nano visudo
+# Scroll down until you find this line and uncomment it:
+%wheel ALL=(ALL) ALL
+
+
+git clone https://aur.archlinux.org/package-query.git
+cd package-query
+makepkg -si
+cd ..
+git clone https://aur.archlinux.org/yaourt.git
+cd yaourt
+makepkg -si
+cd ..
diff --git a/arch-linux-install b/arch-linux-install
@@ -7,12 +7,20 @@ dd if=archlinux.img of=/dev/sdX bs=16M && sync # on linux
 
 # Boot from the usb. If the usb fails to boot, make sure that secure boot is disabled in the BIOS configuration.
 
-# Set swedish keymap
-loadkeys sv-latin1
+# Set preferred keymap
+loadkeys no-latin1 #example
+
+# Select preferred mirror (move to top in list)
+nano /etc/pacman.d/mirrorlist
 
 # This assumes a wifi only system...
 wifi-menu
 
+# Locate disk
+lsblk
+# OR
+fdisk -l
+
 # Create partitions
 cgdisk /dev/sdX
 1 100MB EFI partition # Hex code ef00
@@ -47,7 +55,10 @@ mount /dev/sdX1 /mnt/boot/efi
 
 # Install the system also includes stuff needed for starting wifi when first booting into the newly installed system
 # Unless vim and zsh are desired these can be removed from the command
-pacstrap /mnt base base-devel grub-efi-x86_64 zsh vim git efibootmgr dialog wpa_supplicant
+pacstrap /mnt base base-devel grub-efi-x86_64 zsh nano git efibootmgr dialog wpa_supplicant 
+
+## GUI
+pacstrap /mnt gnome xorg-server xorg-xinit xterm ttf-dejavu alsa-utils
 
 # 'install' fstab
 genfstab -pU /mnt >> /mnt/etc/fstab
@@ -78,7 +89,7 @@ passwd
 # passwd MYUSERNAME
 
 # Configure mkinitcpio with modules needed for the initrd image
-vim /etc/mkinitcpio.conf
+nano /etc/mkinitcpio.conf
 # Add 'ext4' to MODULES
 # Add 'encrypt' and 'lvm2' to HOOKS before filesystems
 
@@ -99,3 +110,7 @@ swapoff -a
 
 # Reboot into the new system, don't forget to remove the cd/usb
 reboot
+
+# Enable gnome
+systemctl enable gdm.service
+reboot
diff --git a/arch-linux-install b/arch-linux-install
@@ -74,7 +74,7 @@ echo LC_ALL=C >> /etc/locale.conf
 passwd
 
 # Add real user remove -s flag if you don't whish to use zsh
-# useradd -m -g users -G wheel,storage,power -s /bin/zsh MYUSERNAME
+# useradd -m -g users -G wheel -s /bin/zsh MYUSERNAME
 # passwd MYUSERNAME
 
 # Configure mkinitcpio with modules needed for the initrd image

diff --git a/arch-linux-install b/arch-linux-install
@@ -66,9 +66,9 @@ hwclock --systohc --utc
 echo MYHOSTNAME > /etc/hostname
 
 # Update locale
-echo LANG=en_US.UTF-8 > /etc/locale.conf
-echo LANGUAGE=en_US > /etc/locale.conf
-echo LC_ALL=C > /etc/locale.conf
+echo LANG=en_US.UTF-8 >> /etc/locale.conf
+echo LANGUAGE=en_US >> /etc/locale.conf
+echo LC_ALL=C >> /etc/locale.conf
 
 # Set password for root
 passwd

diff --git a/arch-linux-install b/arch-linux-install
@@ -3,21 +3,21 @@
 
 # Download the archiso image from https://www.archlinux.org/
 # Copy to a usb-drive
-dd if=archlinux.img of=/dev/sdX bs=16M # on linux
+dd if=archlinux.img of=/dev/sdX bs=16M && sync # on linux
 
-# Boot from the usb. If the usb fails to boot, make sure that secure boot is disabeled in the BIOS configuration.
+# Boot from the usb. If the usb fails to boot, make sure that secure boot is disabled in the BIOS configuration.
 
 # Set swedish keymap
 loadkeys sv-latin1
 
-# This assumes a wifi system...
-wifi-menu wlo1 # wlo1 is the device name, use ip link to find your actual name
+# This assumes a wifi only system...
+wifi-menu
 
 # Create partitions
 cgdisk /dev/sdX
-1 100MB EFI partition
-2 250MB Boot partition
-3 100% size partiton # (to be encrypted)
+1 100MB EFI partition # Hex code ef00
+2 250MB Boot partition # Hex code 8300
+3 100% size partiton # (to be encrypted) Hex code 8300
 
 mkfs.vfat -F32 /dev/sdX1
 mkfs.ext2 /dev/sdX2
@@ -47,12 +47,13 @@ mount /dev/sdX1 /mnt/boot/efi
 
 # Install the system also includes stuff needed for starting wifi when first booting into the newly installed system
 # Unless vim and zsh are desired these can be removed from the command
-pacstrap /mnt base base-devel grub-efi-x86_64 zsh vim efibootmgr dialog wpa_supplicant
+pacstrap /mnt base base-devel grub-efi-x86_64 zsh vim git efibootmgr dialog wpa_supplicant
 
 # 'install' fstab
 genfstab -pU /mnt >> /mnt/etc/fstab
 # Make /tmp a ramdisk (add the following line to /mnt/etc/fstab)
 tmpfs	/tmp	tmpfs	defaults,noatime,mode=1777	0	0
+# Change relatime on all non-boot partitions to noatime (reduces wear if using an SSD)
 
 # Enter the new system
 arch-chroot /mnt /bin/bash
@@ -64,6 +65,11 @@ hwclock --systohc --utc
 # Set the hostname
 echo MYHOSTNAME > /etc/hostname
 
+# Update locale
+echo LANG=en_US.UTF-8 > /etc/locale.conf
+echo LANGUAGE=en_US > /etc/locale.conf
+echo LC_ALL=C > /etc/locale.conf
+
 # Set password for root
 passwd
 

diff --git a/arch-linux-install b/arch-linux-install
@@ -81,7 +81,7 @@ mkinitcpio -p linux
 
 # Setup grub
 grub-install
-In /etc/default/grub edit the line GRUB_CMDLINE_LINUX to GRUB_CMDLINE_LINUX="cryptdevice=/dev/sdX3:luks" then run:
+In /etc/default/grub edit the line GRUB_CMDLINE_LINUX to GRUB_CMDLINE_LINUX="cryptdevice=/dev/sdX3:luks:allow-discards" then run:
 grub-mkconfig -o /boot/grub/grub.cfg
 
 # Exit new system and go into the cd shell

diff --git a/arch-linux-install b/arch-linux-install
@@ -0,0 +1,95 @@
+# Install ARCH Linux with encrypted file-system and UEFI
+# The official installation guide (https://wiki.archlinux.org/index.php/Installation_Guide) contains a more verbose description.
+
+# Download the archiso image from https://www.archlinux.org/
+# Copy to a usb-drive
+dd if=archlinux.img of=/dev/sdX bs=16M # on linux
+
+# Boot from the usb. If the usb fails to boot, make sure that secure boot is disabeled in the BIOS configuration.
+
+# Set swedish keymap
+loadkeys sv-latin1
+
+# This assumes a wifi system...
+wifi-menu wlo1 # wlo1 is the device name, use ip link to find your actual name
+
+# Create partitions
+cgdisk /dev/sdX
+1 100MB EFI partition
+2 250MB Boot partition
+3 100% size partiton # (to be encrypted)
+
+mkfs.vfat -F32 /dev/sdX1
+mkfs.ext2 /dev/sdX2
+
+# Setup the encryption of the system
+cryptsetup -c aes-xts-plain64 -y --use-random luksFormat /dev/sdX3
+cryptsetup luksOpen /dev/sdX3 luks
+
+# Create encrypted partitions
+# This creates one partions for root, modify if /home or other partitions should be on separate partitions
+pvcreate /dev/mapper/luks
+vgcreate vg0 /dev/mapper/luks
+lvcreate --size 8G vg0 --name swap
+lvcreate -l +100%FREE vg0 --name root
+
+# Create filesystems on encrypted partitions
+mkfs.ext4 /dev/mapper/vg0-root
+mkswap /dev/mapper/vg0-swap
+
+# Mount the new system 
+mount /dev/mapper/vg0-root /mnt # /mnt is the installed system
+swapon /dev/mapper/vg0-swap # Not needed but a good thing to test
+mkdir /mnt/boot
+mount /dev/sdX2 /mnt/boot
+mkdir /mnt/boot/efi
+mount /dev/sdX1 /mnt/boot/efi
+
+# Install the system also includes stuff needed for starting wifi when first booting into the newly installed system
+# Unless vim and zsh are desired these can be removed from the command
+pacstrap /mnt base base-devel grub-efi-x86_64 zsh vim efibootmgr dialog wpa_supplicant
+
+# 'install' fstab
+genfstab -pU /mnt >> /mnt/etc/fstab
+# Make /tmp a ramdisk (add the following line to /mnt/etc/fstab)
+tmpfs	/tmp	tmpfs	defaults,noatime,mode=1777	0	0
+
+# Enter the new system
+arch-chroot /mnt /bin/bash
+
+# Setup system clock
+ln -s /usr/share/zoneinfo/Europe/Stockholm /etc/localtime
+hwclock --systohc --utc
+
+# Set the hostname
+echo MYHOSTNAME > /etc/hostname
+
+# Set password for root
+passwd
+
+# Add real user remove -s flag if you don't whish to use zsh
+# useradd -m -g users -G wheel,storage,power -s /bin/zsh MYUSERNAME
+# passwd MYUSERNAME
+
+# Configure mkinitcpio with modules needed for the initrd image
+vim /etc/mkinitcpio.conf
+# Add 'ext4' to MODULES
+# Add 'encrypt' and 'lvm2' to HOOKS before filesystems
+
+# Regenerate initrd image
+mkinitcpio -p linux
+
+# Setup grub
+grub-install
+In /etc/default/grub edit the line GRUB_CMDLINE_LINUX to GRUB_CMDLINE_LINUX="cryptdevice=/dev/sdX3:luks" then run:
+grub-mkconfig -o /boot/grub/grub.cfg
+
+# Exit new system and go into the cd shell
+exit
+
+# Unmount all partitions
+umount -R /mnt
+swapoff -a
+
+# Reboot into the new system, don't forget to remove the cd/usb
+reboot
No results found