lawrencepit · December 3, 2010 01:15 · Dec 3, 2010
diff --git a/gistfile1.txt b/gistfile1.txt
@@ -0,0 +1,116 @@
+version:1
+:debug:main epoch: in tree: 0 installed: 0
+:debug:main readline 6.1.002_0 exists in the ports tree
+:debug:main readline 6.1.000_1 +darwin is the latest installed
+:debug:main readline 6.1.000_1 +darwin is active
+:debug:main Merging existing variants '+darwin' into variants
+:debug:main new fully merged portvariants: darwin +
+:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
+:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
+:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
+:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
+:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
+:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
+:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
+:debug:main universal variant already exists, so not adding the default one
+:debug:main Requested variant darwin is not provided by port readline.
+:debug:main epoch: in tree: 0 installed: 0
+:debug:main ncurses 5.7_1 exists in the ports tree
+:debug:main ncurses 5.7_0 +darwin_10 is the latest installed
+:debug:main ncurses 5.7_0 +darwin_10 is active
+:debug:main Merging existing variants '+darwin_10' into variants
+:debug:main new fully merged portvariants: darwin_10 +
+:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
+:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
+:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
+:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
+:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
+:debug:main adding the default universal variant
+:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
+:debug:main Requested variant darwin_10 is not provided by port ncurses.
+:debug:main epoch: in tree: 0 installed: 0
+:debug:main ncursesw 5.7_1 exists in the ports tree
+:debug:main ncursesw 5.7_0 +darwin_10 is the latest installed
+:debug:main ncursesw 5.7_0 +darwin_10 is active
+:debug:main Merging existing variants '+darwin_10' into variants
+:debug:main new fully merged portvariants: darwin_10 +
+:debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
+:debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
+:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
+:debug:main org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
+:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
+:debug:main adding the default universal variant
+:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
+:debug:main Requested variant darwin_10 is not provided by port ncursesw.
+:debug:main Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_ncursesw/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw/work
+:debug:main Starting logging for ncursesw
+:debug:destroot Starting logging for ncursesw
+:debug:clean Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_ncurses/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses/work
+:debug:clean Starting logging for ncurses
+:debug:destroot Starting logging for ncurses
+:debug:clean Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_readline/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline/work
+:debug:clean Starting logging for readline
+:debug:destroot Starting logging for readline
+:msg:clean --->  Computing dependencies for sqlite3:info:clean .:debug:clean Searching for dependency: readline
+:debug:clean Found Dependency: receipt exists for readline
+:debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
+:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
+:debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
+:debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
+:debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
+:debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
+:debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
+:debug:clean universal variant already exists, so not adding the default one
+:debug:clean Executing variant universal provides universal
+:debug:clean Searching for dependency: ncurses
+:debug:clean Found Dependency: receipt exists for ncurses
+:debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
+:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
+:debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
+:debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
+:debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
+:debug:clean adding the default universal variant
+:debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
+:debug:clean Executing variant universal provides universal
+:info:clean .:debug:clean Searching for dependency: ncurses
+:debug:clean Found Dependency: receipt exists for ncurses
+:info:clean .:debug:clean Searching for dependency: ncursesw
+:debug:clean Found Dependency: receipt exists for ncursesw
+:debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
+:debug:clean OS darwin/10.4.0 (Mac OS X 10.6) arch i386
+:debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided
+:debug:clean org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided
+:debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided
+:debug:clean adding the default universal variant
+:debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
+:debug:clean Executing variant universal provides universal
+:info:clean .:info:clean .:debug:clean Searching for dependency: ncursesw
+:debug:clean Found Dependency: receipt exists for ncursesw
+:info:clean .:msg:clean 
+:msg:clean --->  Dependencies to be installed: ncurses ncursesw readline
+:debug:clean Starting logging for ncursesw
+:debug:clean Starting logging for ncurses
+:debug:clean Starting logging for readline
+:debug:main Executing org.macports.main (sqlite3)
+:debug:main Skipping completed org.macports.fetch (sqlite3)
+:debug:main Skipping completed org.macports.checksum (sqlite3)
+:debug:main Skipping completed org.macports.extract (sqlite3)
+:debug:main Skipping completed org.macports.patch (sqlite3)
+:debug:main Skipping completed org.macports.configure (sqlite3)
+:msg:main --->  Building sqlite3
+:debug:build build phase started at Fri Dec  3 12:10:29 EST 2010
+:debug:build Executing org.macports.build (sqlite3)
+:debug:build port disallows a parallel build
+:debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_databases_sqlite3/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6'
+:debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_databases_sqlite3/work/sqlite-3.7.3" && /usr/bin/gnumake all'
+:info:build sh: line 0: cd: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_databases_sqlite3/work/sqlite-3.7.3: No such file or directory
+:info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_databases_sqlite3/work/sqlite-3.7.3" && /usr/bin/gnumake all " returned error 1
+:error:build Target org.macports.build returned: shell command failed (see log for details)
+:debug:build Backtrace: shell command failed (see log for details)
+    while executing
+"command_exec build"
+    (procedure "portbuild::build_main" line 8)
+    invoked from within
+"$procedure $targetname"
+:info:build Warning: the following items did not execute (for sqlite3): org.macports.activate org.macports.build org.macports.destroot org.macports.install
+:notice:build Log for sqlite3 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_databases_sqlite3/main.log
No results found