kellogcheung

MIFARE Classic

Here are the steps to follow in order to read your cards. Your goal is to find as many keys as possible. The keys unlock sections of your card for the Flipper to read them - you must have a card. Once you read enough sections, you can use an emulated or cloned card at the original card reader to unlock it (sometimes even without finding all of the keys!).

Important

The features described in this guide are not yet officially released. Please select your firmware below for the relevant preparation instructions:

Official firmware (OFW)

Flash this experimental build to follow this guide. When you complete all of the steps, restore the latest official firmware on the Flipper Zero. You may skip this step when this status badge is purple with the text "merge

ASUS RT-AC86U Asuswrt-Merlin Install Tailscale

刷入 Asuswrt-Merlin 固件

Tip

不必担心把路由器刷废了，华硕的路由器可以让你一键重置回来

1）下载固件

先到 https://www.asuswrt-merlin.net/download 下载相应的固件，并解压。（当前最新 RT-AC86U_386.13_2.zip）

Using Gmail SMTP with Cloudflare Email Routing: Step-by-Step Guide

Learn how to send emails through Gmail SMTP with Cloudflare Email Routing in this comprehensive guide.

Step 1: Enable 2-Factor Authentication

To proceed with this method, ensure that you have enabled two-factor authentication for your Google account. If you haven't done so already, you can follow the link to set it up → Enable 2FA in your Google account.

Step 2: Create an App Password for Mail

For some reason, it is surprisingly hard to create a bootable Windows USB using macOS. These are my steps for doing so, which have worked for me in macOS Monterey (12.6.1) for Windows 10 and 11. After following these steps, you should have a bootable Windows USB drive.

1. Download a Windows disc image (i.e. ISO file)

You can download Windows 10 or Windows 11 directly from Microsoft.

2. Identify your USB drive

After plugging the drive to your machine, identify the name of the USB device using diskutil list, which should return an output like the one below. In my case, the correct disk name is disk2.

	#!/bin/sh

	# This script is to be used in combination with Synology Autorun:
	# - https://github.com/reidemei/synology-autorun
	# - https://github.com/Jip-Hop/synology-autorun
	#
	# You need to change the task_id to match your Hyper Backup task.
	# Get it with command: more /usr/syno/etc/synobackup.conf
	#
	# I like to keep "Beep at start and end" disabled in Autorun, because I don't

	#!/bin/sh

	# This script is to be used in combination with Synology Autorun:
	# - https://github.com/reidemei/synology-autorun
	# - https://github.com/Jip-Hop/synology-autorun
	#
	# You need to change the task_id to match your Hyper Backup task.
	# Get it with command: more /usr/syno/etc/synobackup.conf
	#
	# I like to keep "Beep at start and end" disabled in Autorun, because I don't