Skip to content

Instantly share code, notes, and snippets.

View jaindinkar's full-sized avatar
💡
"Pleasure in the job puts perfection in the work" ~Aristotle

Dinkar Jain jaindinkar

💡
"Pleasure in the job puts perfection in the work" ~Aristotle
6 followers · 24 following
View GitHub Profile
@Solarflame5
Solarflame5 / cups_hplj1020_tutorial.md
Last active April 23, 2026 10:56
How to set up an HP LaserJet 1020 printer server using CUPS on Raspberry Pi OS Bullseye

How to set up an HP LaserJet 1020 printer server using CUPS on Raspberry Pi OS Bullseye

Set up the Raspberry Pi

Note: This probably also works in Raspberry Pi OS Bookworm, but I have only tested this on my Pi 1 B+ that doesn't support Bookworm. It should also probably work on most Debian based distros including Ubuntu.

  • Flash the Raspbian Bullseye Lite image to the SD card
  • Configure the user account, network and SSH settings while imaging to make setup easier.

Install the required packages

You need to install CUPS, HPLIP, and the foo2zjs printer drivers, use the following commands:

sudo apt update
sudo apt install cups hplip printer-driver-foo2zjs
@DrSensor
DrSensor / esptool.md
Created November 18, 2018 22:00
ESP Troubleshooting 101 
$ esptool.py chip_id
esptool.py v2.5.1
Found 1 serial ports
Serial port /dev/ttyUSB0
Connecting....
Detecting chip type... ESP8266
Chip is ESP8266EX
Features: WiFi
MAC: 84:f3:eb:0b:dd:53
@rxaviers
rxaviers / gist:7360908
Last active May 13, 2026 02:53
Complete list of github markdown emoji markup

People

:bowtie: :bowtie: 😄 :smile: 😆 :laughing:
😊 :blush: 😃 :smiley: ☺️ :relaxed:
😏 :smirk: 😍 :heart_eyes: 😘 :kissing_heart:
😚 :kissing_closed_eyes: 😳 :flushed: 😌 :relieved:
😆 :satisfied: 😁 :grin: 😉 :wink:
😜 :stuck_out_tongue_winking_eye: 😝 :stuck_out_tongue_closed_eyes: 😀 :grinning:
😗 :kissing: 😙 :kissing_smiling_eyes: 😛 :stuck_out_tongue: