Skip to content

Instantly share code, notes, and snippets.

@chinshr
chinshr / Jenkinsfile
Last active May 20, 2025 13:10
Best of Jenkinsfile, a collection of useful workflow scripts ready to be copied into your Jenkinsfile on a per use basis.
#!groovy
# Best of Jenkinsfile
# `Jenkinsfile` is a groovy script DSL for defining CI/CD workflows for Jenkins
node {
}
@EEVblog
EEVblog / Arduino-IR-TX-NEC
Last active January 25, 2023 20:59
A simple Arduino driver for the NEC (Japanese) Infrared IR protocol. Drive an IR LED direct with your own code. This is a direct pin bit-bang approach, so beware about interrupts and timing difference between hardware. Feel free to use hardware PWM to generate the carrier frequency if you want better accuracy.
//*****************************************
// NEC (Japanese) Infrared code sending library for the Arduino
// Send a standard NEC 4 byte protocol direct to an IR LED on the define pin
// Assumes an IR LED connected on I/O pin to ground, or equivalent driver.
// Tested on a Freetronics Eleven Uno compatible
// Written by David L. Jones www.eevblog.com
// Youtube video explaining this code: http://www.youtube.com/watch?v=BUvFGTxZBG8
// License: Creative Commons CC BY
//*****************************************
@pklaus
pklaus / arduino-due_high-speed-ADC.ino
Last active September 5, 2025 12:45
Arduino Due: ADC → DMA → USB @ 1MSPS
#undef HID_ENABLED
// Arduino Due ADC->DMA->USB 1MSPS
// by stimmer
// from http://forum.arduino.cc/index.php?topic=137635.msg1136315#msg1136315
// Input: Analog in A0
// Output: Raw stream of uint16_t in range 0-4095 on Native USB Serial/ACM
// on linux, to stop the OS cooking your data:
// stty -F /dev/ttyACM0 raw -iexten -echo -echoe -echok -echoctl -echoke -onlcr