Skip to content

Instantly share code, notes, and snippets.

View cwschmidt's full-sized avatar

cwschmidt

11 followers · 18 following
View GitHub Profile
@yorickdowne
yorickdowne / friday.md
Last active March 3, 2026 08:09
Debian 13 trixie upgrade

Debian 13

Caution Upgrading from Debian 12 to Debian 13 on machines with mdadm has intermittently failed for me; symptom is that grub EFI is not up to date and system boots into BIOS. Root cause under investigation; it might not be related to mdadm.

To start, read the official release notes.

If your install fits into "vanilla Debian plus maybe a handful of 3rd-party repos", then this guide for a simple upgrade to Debian 13 "trixie" from Debian 12 "bookworm" can be helpful. 3rd-party repos are handled with a find command.

Note upgrade is only supported from Debian 12 to Debian 13. If you are on Debian 11, upgrade to Debian 12 first. Then once on Debian 12, you can upgrade to Debian 13.

@W1R3D-Code
W1R3D-Code / sonarqube.service
Last active October 15, 2024 10:22
Running SonarQube as a Service on Linux with SystemD - /etc/systemd/system/sonarqube.service
[Unit]
Description=SonarQube service
After=syslog.target network.target
[Service]
Type=forking
ExecStart=/opt/sonarqube/bin/linux-x86-64/sonar.sh start
ExecStop=/opt/sonarqube/bin/linux-x86-64/sonar.sh stop
@hachesilva
hachesilva / restart-cinnamon-in-linux-mint.txt
Created March 5, 2019 15:24
Several ways to restart Cinnamon in Linux Mint
1. Hit ctrl+alt+esc
2. Hit Alt+F2, type r, and press Enter
3. Switch to another tty, for example tty6, by pressing Ctrl+Alt+F6
Run:
pkill -HUP -f "cinnamon --replace"
Return to tty8 by pressing Ctrl+Alt+F8
@youmych
youmych / how-to-install-latest-gcc-on-linux-mint.txt
Last active July 20, 2020 21:10 — forked from application2000/how-to-install-latest-gcc-on-ubuntu-lts.txt
How to install latest gcc on Linux Mint 18 (18.3)
These commands are based on a askubuntu answer http://askubuntu.com/a/581497 and https://askubuntu.com/questions/26498/choose-gcc-and-g-version
To install gcc-7 (gcc-7.2.0), I had to do more stuff as shown below.
USE THOSE COMMANDS AT YOUR OWN RISK. I SHALL NOT BE RESPONSIBLE FOR ANYTHING.
ABSOLUTELY NO WARRANTY.
If you are still reading let's carry on with the code.
sudo apt-get update && \
sudo apt-get install build-essential software-properties-common -y && \
sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y && \
@Apjue
Apjue / utility.hpp
Created December 31, 2017 15:42
C++11 simple non-RTTI variant
#include <type_traits>
template <typename...>
struct IsOneOf
{
static constexpr bool value = false;
};
template <typename T, typename S, typename... Ts>
struct IsOneOf<T, S, Ts...>
@Serikov
Serikov / main.cpp
Last active December 9, 2024 21:18
C++ Coroutines Ts generator<T> with co_await
#include <coroutine>
#include <stdexcept>
#include <variant>
#include <memory>
namespace detail {
// simple type erasure for iterators
template<typename T>
struct generic_iterable
@samrocketman
samrocketman / libimobiledevice_ifuse_Ubuntu.md
Last active September 27, 2025 02:50
On Ubuntu 16.04, since iOS 10 update, libimobiledevice can't connect to my iPhone. This is my attempt to document a fix.

Why this document?

I upgraded my iPhone 5s to iOS 10 and could no longer retrieve photos from it. This was unacceptable for me so I worked at achieving retrieving my photos. This document is my story (on Ubuntu 16.04).

The solution is to compile libimobiledevice and ifuse from source.

Audience

Who is this guide intended for?

@steipete
steipete / ios-xcode-device-support.sh
Last active May 11, 2025 13:30
Using iOS 15 devices with Xcode 12.5 (instead of Xcode 13)
# The trick is to link the DeviceSupport folder from the beta to the stable version.
# sudo needed if you run the Mac App Store version. Always download the dmg instead... you'll thank me later :)
# Support iOS 15 devices (Xcode 13.0) with Xcode 12.5:
sudo ln -s /Applications/Xcode-beta.app/Contents/Developer/Platforms/iPhoneOS.platform/DeviceSupport/15.0 /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/DeviceSupport
# Then restart Xcode and reconnect your devices. You will need to do that for every beta of future iOS versions
# (A similar approach works for older versions too, just change the version number after DeviceSupport)
@xiongjia
xiongjia / 0_main.cxx
Last active February 21, 2026 07:35
A simple sample of Boost DLL #boost #devsample
/**
* A simple sample of Boost DLL
*/
#include <iostream>
#include "boost/shared_ptr.hpp"
#include "boost/function.hpp"
#include "boost/dll/import.hpp"
#include "1_plugin.hxx"
@mortehu
mortehu / zip-test.cc
Last active May 23, 2022 12:00
C++ zip
#include <cstdio>
#include <list>
#include <vector>
#include "zip.h"
int main() {
std::vector<int> one{{1, 11}};
auto two = [] { return std::vector<short>{{2, 22}}; };
const std::list<float> three{{3, 33}};