Created
July 23, 2023 18:05
-
-
Save cpietsch/649d17e6df0228093a2f4ada0bd13c9c to your computer and use it in GitHub Desktop.
Revisions
-
cpietsch created this gist
Jul 23, 2023 .There are no files selected for viewing
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode charactersOriginal file line number Diff line number Diff line change @@ -0,0 +1,515 @@ ############### # AUTHOR: Szabolcs Hornyak / design85@gmail.com # https://szabolcs.eu/2020/12/29/prusaslicer-sw-x1-genius/ ############### ## Artillery Hornet printer profile is based on PR https://github.com/slic3r/slic3r-profiles/pull/14 created by https://github.com/newbeetle # Print profiles for the Artillery printers. [vendor] # Vendor name will be shown by the Config Wizard. name = Artillery # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. config_version = 0.0.5 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Artillery/ # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% # The printer models will be shown by the Configuration Wizard in this order, # also the first model installed & the first nozzle installed will be activated after install. # Printer model name will be shown by the installation wizard. ############# ## PRINTER ## ############# [printer_model:X1] name = Artillery Sidewinder X1 variants = 0.4 technology = FFF bed_model = bed-x1.stl bed_texture = bed-x1.png default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery [printer_model:Genius] name = Artillery Genius variants = 0.4 technology = FFF bed_model = bed-genius.stl bed_texture = bed-genius.png default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery [printer_model:Hornet] name = Artillery Hornet variants = 0.4 technology = FFF bed_model = bed-hornet.stl bed_texture = bed-hornet.png default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery # Common printer preset [printer:*common*] before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0 between_objects_gcode = cooling_tube_length = 5 cooling_tube_retraction = 91.5 default_filament_profile = Generic PLA @Artillery default_print_profile = 0.20mm NORMAL @Artillery deretract_speed = 0 extruder_colour = #FFFF00 extruder_offset = 0x0 gcode_flavor = marlin layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] machine_limits_usage = emit_to_gcode machine_max_acceleration_e = 5000,5000 machine_max_acceleration_extruding = 1250,1250 machine_max_acceleration_retracting = 1250,1250 machine_max_acceleration_x = 1000,960 machine_max_acceleration_y = 1000,960 machine_max_acceleration_z = 1000,1000 machine_max_feedrate_e = 120,120 machine_max_feedrate_x = 200,100 machine_max_feedrate_y = 200,100 machine_max_feedrate_z = 12,12 machine_max_jerk_e = 1.5,1.5 machine_max_jerk_x = 8,8 machine_max_jerk_y = 8,8 machine_max_jerk_z = 0.4,0.4 machine_min_extruding_rate = 0,0 machine_min_travel_rate = 0,0 max_layer_height = 0.25 max_print_height = 250 min_layer_height = 0.07 nozzle_diameter = 0.4 pause_print_gcode = printer_technology = FFF remaining_times = 0 retract_before_travel = 1 retract_before_wipe = 0% retract_layer_change = 1 retract_length = 1.9 retract_length_toolchange = 4 retract_lift = 0.6 retract_lift_above = 0 retract_lift_below = 380 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 35 silent_mode = 0 single_extruder_multi_material = 0 toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 variable_layer_height = 1 wipe = 1 z_offset = 0 end_gcode = G4 ; wait\nG92 E0 ; prepare to retract\nG1 E-0.5 F3000; retract to avoid stringing\n\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X1 Y1 F1200\n\n; Raise nozzle and present bed\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+120, max_print_height)}{endif} ; Move print head up\nG90 ; use absolute coordinates\n\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM85 S0 ; deactivate idle timeout\nM84 ; disable motors\n [printer:*common_STOCK_FW*] inherits = *common* start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature] ; wait for bed to heat up\nM104 S[first_layer_temperature] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif} [printer:*common_UPD_FW*] inherits = *common* start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM900 K0.12 ; K factor\nM900 W[extrusion_width] H[layer_height] D[filament_diameter]\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature] ; wait for bed to heat up\nM104 S[first_layer_temperature] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n;Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; ABL T\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif} [printer:*bowden*] inherits = *common_STOCK_FW* retract_length = 5 retract_lift = 0.1 retract_before_wipe = 50% default_filament_profile = Generic PLA @Artillery [printer:*0.4nozzle*] nozzle_diameter = 0.4 max_layer_height = 0.32 min_layer_height = 0.04 printer_variant = 0.4 default_print_profile = 0.20mm NORMAL @Artillery [printer:Artillery Sidewinder X1] inherits = *common_STOCK_FW* renamed_from = "Sidewinder X1" printer_model = X1 printer_variant = 0.4 bed_shape = 0x0,300x0,300x300,0x300 max_print_height = 400 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_X1 [printer:Artillery Sidewinder X1 BL-TOUCH] inherits = *common_UPD_FW* renamed_from = "Sidewinder X1 BL-TOUCH" printer_model = X1 printer_variant = 0.4 bed_shape = 0x0,300x0,300x300,0x300 max_print_height = 400 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_X1 [printer:Artillery Genius] inherits = *common_STOCK_FW* renamed_from = "Genius" printer_model = Genius printer_variant = 0.4 bed_shape = 0x0,220x0,220x220,0x220 max_print_height = 250 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius [printer:Artillery Genius BL-TOUCH] inherits = *common_UPD_FW* renamed_from = "Genius BL-TOUCH" printer_model = Genius printer_variant = 0.4 bed_shape = 0x0,220x0,220x220,0x220 max_print_height = 250 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius [printer:Artillery Hornet] inherits = *bowden* printer_model = Hornet printer_variant = 0.4 bed_shape = 0x0,220x0,220x220,0x220 max_print_height = 250 machine_limits_usage = time_estimate_only printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Hornet\nPRINTER_HAS_Bowden ########### ## PRINT ## ########### # Common print preset [print:*common*] # V2.2 # #bottom_fill_pattern = rectilinear #top_fill_pattern = rectilinear #fill_pattern = cubic # V2.3 # top_fill_pattern = monotonic bottom_fill_pattern = monotonic fill_pattern = adaptivecubic avoid_crossing_perimeters = 0 bridge_acceleration = 1000 bridge_angle = 0 bridge_flow_ratio = 0.78 bridge_speed = 20 # brim_width = 5 bottom_solid_min_thickness = 1.2 clip_multipart_objects = 1 compatible_printers = complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 25 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 25 extruder_clearance_radius = 45 extrusion_width = 0.45 fill_angle = 45 fill_density = 15% first_layer_acceleration = 500 first_layer_extrusion_width = 0.42 first_layer_height = 150% first_layer_speed = 20 gap_fill_speed = 30 gcode_comments = 1 gcode_label_objects = 1 infill_acceleration = 1000 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% infill_speed = 50 interface_shells = 0 max_print_speed = 150 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = overhangs = 1 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode perimeters = 3 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 45 post_process = print_settings_id = raft_layers = 0 resolution = 0 seam_position = nearest single_extruder_multi_material_priming = 0 skirts = 1 skirt_distance = 6 skirt_height = 1 small_perimeter_speed = 25 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 solid_infill_speed = 50 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 support_material_interface_extruder = 0 support_material_angle = 0 support_material_buildplate_only = 0 support_material_enforce_layers = 0 support_material_contact_distance = 0.15 support_material_interface_contact_loops = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 55 support_material_with_sheath = 0 support_material_xy_spacing = 50% thin_walls = 1 travel_speed = 130 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 30 wipe_tower = 0 wipe_tower_bridging = 10 wipe_tower_rotation_angle = 0 wipe_tower_width = 60 wipe_tower_x = 170 wipe_tower_y = 125 xy_size_compensation = 0 [print:*0.08mm*] inherits = *common* default_acceleration = 500 layer_height = 0.08 perimeters = 3 bottom_solid_layers = 9 top_solid_layers = 11 [print:*0.10mm*] inherits = *common* default_acceleration = 500 layer_height = 0.1 perimeters = 3 bottom_solid_layers = 7 top_solid_layers = 9 [print:*0.12mm*] inherits = *common* default_acceleration = 500 layer_height = 0.12 perimeters = 3 bottom_solid_layers = 6 top_solid_layers = 7 [print:*0.16mm*] inherits = *common* layer_height = 0.16 bottom_solid_layers = 5 top_solid_layers = 7 [print:*0.20mm*] inherits = *common* layer_height = 0.20 bottom_solid_layers = 4 top_solid_layers = 5 [print:*0.24mm*] inherits = *common* layer_height = 0.24 top_infill_extrusion_width = 0.45 bottom_solid_layers = 3 top_solid_layers = 4 [print:*0.28mm*] inherits = *common* layer_height = 0.28 first_layer_height = 0.36 top_infill_extrusion_width = 0.45 first_layer_extrusion_width = 0.75 bottom_solid_layers = 3 top_solid_layers = 4 [print:0.08mm SUPERDETAIL @Artillery] inherits = *0.08mm* compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4 [print:0.10mm HIGHDETAIL @Artillery] inherits = *0.10mm* compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4 [print:0.12mm DETAIL @Artillery] inherits = *0.12mm* compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4 [print:0.16mm OPTIMAL @Artillery] inherits = *0.16mm* compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4 [print:0.20mm SLOW @Artillery] inherits = *0.20mm* external_perimeter_speed = 15 fill_density = 20% gap_fill_speed = 25 infill_speed = 50 perimeter_speed = 30 perimeters = 3 solid_infill_speed = 50 top_solid_infill_speed = 25 first_layer_speed = 15 travel_speed = 100 compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4 [print:0.20mm NORMAL @Artillery] inherits = *0.20mm* compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4 [print:0.20mm SPEED @Artillery] inherits = *0.20mm* external_perimeter_speed = 35 fill_density = 15% fill_pattern = grid gap_fill_speed = 45 infill_speed = 150 infill_only_where_needed = 1 perimeter_speed = 60 perimeters = 2 solid_infill_speed = 150 top_solid_infill_speed = 50 travel_speed = 170 compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4 [print:0.24mm DRAFT @Artillery] inherits = *0.24mm* compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4 [print:0.28mm SUPERDRAFT @Artillery] inherits = *0.28mm* compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4 ############### ## FILAMENTS ## ############### # Common filament preset [filament:*common*] cooling = 1 compatible_printers = extrusion_multiplier = 1 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 filament_notes = "" filament_settings_id = "" filament_soluble = 0 min_print_speed = 15 slowdown_below_layer_time = 15 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_Artillery.*/ [filament:*PLA*] inherits = *common* bed_temperature = 60 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 1 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #428AF5 filament_cost = 20 filament_density = 1.24 filament_max_volumetric_speed = 15 filament_type = PLA first_layer_bed_temperature = 65 first_layer_temperature = 210 full_fan_speed_layer = 3 max_fan_speed = 100 min_fan_speed = 100 temperature = 205 [filament:*PET*] inherits = *common* bed_temperature = 70 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 3 fan_always_on = 1 fan_below_layer_time = 20 filament_colour = #42E9F5 filament_cost = 30 filament_density = 1.27 filament_max_volumetric_speed = 8 filament_type = PETG first_layer_bed_temperature = 70 first_layer_temperature = 235 max_fan_speed = 50 min_fan_speed = 20 temperature = 230 [filament:*ABS*] inherits = *common* bed_temperature = 90 bridge_fan_speed = 30 cooling = 0 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 20 filament_colour = #6603FC filament_cost = 20 filament_density = 1.04 filament_max_volumetric_speed = 11 filament_type = ABS first_layer_bed_temperature = 90 first_layer_temperature = 240 max_fan_speed = 0 min_fan_speed = 0 temperature = 240 top_fan_speed = 0 [filament:*TPU*] inherits = *common* bed_temperature = 55 cooling = 0 disable_fan_first_layers = 3 fan_always_on = 0 fan_below_layer_time = 20 filament_colour = #CFFFFB filament_cost = 30 filament_density = 1.2 filament_max_volumetric_speed = 11 filament_retract_before_travel = 4 filament_retract_length = 2.5 filament_retract_speed = 30 filament_type = TPU first_layer_bed_temperature = 55 first_layer_temperature = 210 max_fan_speed = 70 min_fan_speed = 0 [filament:Generic PLA @Artillery] inherits = *PLA* filament_vendor = Generic [filament:Generic PETG @Artillery] inherits = *PET* filament_vendor = Generic [filament:Generic ABS @Artillery] inherits = *ABS* filament_vendor = Generic [filament:Generic TPU @Artillery] inherits = *TPU* filament_vendor = Generic