Skip to content

Instantly share code, notes, and snippets.

@chemicstry

chemicstry/arduino_audi_cdc.ino

Created March 29, 2020 12:39
Show Gist options

  • Select an option

    Learn more about clone URLs
  • Save chemicstry/6cb73b565049144e21f39305a5006afc to your computer and use it in GitHub Desktop.

Select an option

Learn more about clone URLs
Save chemicstry/6cb73b565049144e21f39305a5006afc to your computer and use it in GitHub Desktop.
Download ZIP
Audi Concert Radio CDC protocol for arduino
Raw
arduino_audi_cdc.ino
// works also with ATMEGA8 - tested
// SPI PINS used for transfer from CDCemulator to RADIO:
// MOSI (arduino pin 11) -> DataIN
// CLK (arduino pin 13) -> CLK
#include <SPI.h>
//#include <SoftwareSerial.h>
#define PREV 9 //PB1,pin 15
#define PLAY 5 //PD5, pin 11
#define NEXT 6 //PD6,pin 12
#define DataOut 2
#define BUFFER 10
#define BYTES_DELAY 750//874
#define PACKET_DALEY 100
#ifdef DataOut==2
#define Data_out_interrupt 0
#elif DataOut==3
#define Data_out_interrupt 1
#endif
#define CDC_PREFIX1 0x53
#define CDC_PREFIX2 0x2C
#define CDC_END_CMD 0x14
#define CDC_END_CMD2 0x38
#define CDC_PLAY 0xE4
#define CDC_STOP 0x10
#define CDC_NEXT 0xF8
#define CDC_PREV 0x78
#define CDC_SEEK_FWD 0xD8
#define CDC_SEEK_RWD 0x58
#define cd1 0x0C
#define cd2 0x8C
#define cd3 0x4C
#define cd4 0xCC
#define cd5 0x2C
#define cd6 0xAC
#define CDC_SCAN 0xA0
#define CDC_SFL 0x60
#define CDC_PLAY_NORMAL 0x08
#define MODE_PLAY 0xFF
#define MODE_SHFFL 0x55
#define MODE_SCAN 0x00
volatile uint16_t captimehi = 0;
volatile uint16_t captimelo = 0;
volatile uint8_t capturingstart = 0;
volatile uint8_t capturingbytes = 0;
volatile uint32_t cmd[BUFFER];
volatile uint8_t cmd_write_buffer_pointer = 0;
volatile uint8_t cmdbit = 0;
volatile uint8_t newcmd[BUFFER];
volatile uint8_t prev_cmd = 0;
volatile uint8_t cd=0xBE;
volatile uint8_t tr=0xFD;
volatile uint8_t mode=MODE_PLAY;
volatile uint8_t idle=1;
volatile uint8_t load_cd=0;
bool seeking = false;
uint8_t getCommand(uint32_t cmd2);
void send_package(uint8_t c0, uint8_t c1, uint8_t c2, uint8_t c3, uint8_t c4, uint8_t c5, uint8_t c6, uint8_t c7);
void read_Data_out();
void prev_song();
void toggle_play_mode();
void next_song();
void play_cd(uint8_t cd);
void setup(){
pinMode(PREV, OUTPUT);
pinMode(PLAY, OUTPUT);
pinMode(NEXT, OUTPUT);
digitalWrite(PREV, LOW);
digitalWrite(PLAY, LOW);
digitalWrite(NEXT, LOW);
pinMode(DataOut,INPUT_PULLUP);
attachInterrupt(Data_out_interrupt,read_Data_out,CHANGE);
cli();//stop interrupts
TCCR1A = 0;// set entire TCCR1A register to 0
TCCR1B = 0;// same for TCCR1B
TCNT1 = 0;//initialize counter value to 0;
// Set CS11 bit for 8 => tick every 1us@8MHz, 0.5us@16MHz
// Set CS11 bit and CS10 for 64 prescaler => tick every 8us@8MHz, 4us@16MHz
TCCR1B |= (1 << CS11);//| (1 << CS10);
sei();//allow interrupts
Serial.begin(115200);
SPI.begin();
SPI.setBitOrder(MSBFIRST);
SPI.setDataMode(SPI_MODE1);
SPI.setClockDivider(SPI_CLOCK_DIV128); //62.5kHz@8Mhz 125kHz@16MHz
//SPI.setClockDivider(SPI_CLOCK_DIV64);//125kHz@8Mhz
send_package(0x34,cd,tr,0xFF,0xFF,mode,0xFA,0x3C); //load disc
delay(100);
send_package(0x74,cd,tr,0xFF,0xFF,mode,0x8F,0x7C); //idle
delay(10);
}
void loop()
{
for (int cmd_read_buffer_pointer = 0; cmd_read_buffer_pointer < BUFFER; cmd_read_buffer_pointer++)
{
if (newcmd[cmd_read_buffer_pointer])
{
switch(getCommand(cmd[cmd_read_buffer_pointer]))
{
case CDC_STOP:
idle = 1;
break;
case CDC_PLAY:
idle = 0;
if (seeking) {
Serial.println("AT#MT");
seeking = false;
} else
Serial.println("AT#MA");
break;
case CDC_PREV:
Serial.println("AT#ME");
break;
case CDC_NEXT:
Serial.println("AT#MD");
break;
case CDC_SEEK_FWD:
Serial.println("AT#MR");
seeking = true;
break;
case CDC_SEEK_RWD:
Serial.println("AT#MS");
seeking = true;
break;
}
newcmd[cmd_read_buffer_pointer]=0;
}
}
if (idle)
send_package(0x74,cd,tr,0xFF,0xFF,mode,0x8F,0x7C);
else
send_package(0x34,cd,tr,0xFF,0xFF,mode,0xCF,0x7c);
delay(PACKET_DALEY);
}
uint8_t getCommand(uint32_t cmd2)
{
if (((cmd2>>24) & 0xFF) == CDC_PREFIX1 && ((cmd2>>16) & 0xFF) == CDC_PREFIX2)
if (((cmd2>>8) & 0xFF) == (0xFF^((cmd2) & 0xFF)))
return (cmd2>>8) & 0xFF;
return 0;
}
void send_package(uint8_t c0, uint8_t c1, uint8_t c2, uint8_t c3, uint8_t c4, uint8_t c5, uint8_t c6, uint8_t c7)
{
SPI.transfer(c0);
delayMicroseconds(BYTES_DELAY);
SPI.transfer(c1);
delayMicroseconds(BYTES_DELAY);
SPI.transfer(c2);
delayMicroseconds(BYTES_DELAY);
SPI.transfer(c3);
delayMicroseconds(BYTES_DELAY);
SPI.transfer(c4);
delayMicroseconds(BYTES_DELAY);
SPI.transfer(c5);
delayMicroseconds(BYTES_DELAY);
SPI.transfer(c6);
delayMicroseconds(BYTES_DELAY);
SPI.transfer(c7);
}
void read_Data_out() //remote signals
{
//if (newcmd==0){
if(digitalRead(DataOut))
{
if (capturingstart || capturingbytes)
{
captimelo = TCNT1;
}
else
capturingstart = 1;
TCNT1 = 0;
//eval times
//tick @0.5us
//9000us HIGH and 4500us LOW
if (captimehi > 17000 && captimelo > 8000 )//&& captimehi < 19000/8 && captimelo < 10000)
{
capturingstart = 0;
capturingbytes = 1;
// cmdbit=0;
// cmd=0;
//Serial.println("startseq found");
} //logic one = 1700us
else if(capturingbytes && captimelo > 3300 )//&& captimelo < 3500)
{
//Serial.println("bit 1");
cmd[cmd_write_buffer_pointer] = (cmd[cmd_write_buffer_pointer]<<1) | 0x00000001;
cmdbit++;
}
else if (capturingbytes && captimelo > 1000)// && captimelo < 1200)
{
//Serial.println("bit 0");
cmd[cmd_write_buffer_pointer] = (cmd[cmd_write_buffer_pointer]<<1);
cmdbit++;
}
if(cmdbit == 32)
{
//Serial.println("32bit");
//Serial.println(cmd[cmd_write_buffer_poiter],HEX);
newcmd[cmd_write_buffer_pointer] = 1;
capturingbytes = 0;
cmdbit=0;
cmd_write_buffer_pointer++;
if(cmd_write_buffer_pointer==BUFFER) cmd_write_buffer_pointer=0;
}
}
else
{
captimehi = TCNT1;
TCNT1 = 0;
}
// }
}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment