I hereby claim:
- I am anroofcode on github.
- I am anro (https://keybase.io/anro) on keybase.
- I have a public key whose fingerprint is 824E 1912 76E0 0272 93E8 32C7 FF71 FBAE 793D 5833
To claim this, I am signing this object:
I hereby claim:
To claim this, I am signing this object:
| /* | |
| * Ultra_bcm_config - A utility that does one thing, pretty well. | |
| * | |
| * Andrew Robinson <andrew.robinson@gmail.com> | |
| * | |
| * Based off of the framework provided by iwconfig.c - the standard | |
| * linux wireless driver configuration tool. Modified to pass a special | |
| * structure to the custom Broadcom BCM4329 chipset driver running in the | |
| * kernel to enable AccessPoint mode, broadcasting of the SSID, and WEP/WPA | |
| * encryption. |
| #if defined(__AVR_ATmega324P__) | |
| /* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duemilanove */ | |
| #define LED_DDR DDRB | |
| #define LED_PORT PORTB | |
| #define LED_PIN PINB | |
| #define LED PINB1 | |
| /* Ports for soft UART */ | |
| #ifdef SOFT_UART | |
| #define UART_PORT PORTD |
| set AVR=C:\WinAVR-20100110 | |
| set CC=avr-gcc | |
| set PATH=C:\WinAVR-20100110\bin;C:\WinAVR-20100110\utils\bin | |
| make -f Makefile atmega324 | |
| avrdude -c usbtiny -patmega324p -U flash:w:optiboot_atmega324.hex | |
| avrdude -c usbtiny -patmega324p -U lfuse:w:0xFF:m | |
| avrdude -c usbtiny -patmega324p -U hfuse:w:0xDE:m | |
| avrdude -c usbtiny -patmega324p -U efuse:w:0xFD:m |
| atmega324: TARGET = atmega324 | |
| atmega324: MCU_TARGET = atmega324p | |
| atmega324: CFLAGS += '-DLED_START_FLASHES=3' '-DBAUD_RATE=115200' | |
| atmega324: AVR_FREQ = 16000000L | |
| atmega324: LDSECTION = --section-start=.text=0x7e00 | |
| atmega324: $(PROGRAM)_atmega324.hex | |
| atmega324: $(PROGRAM)_atmega324.lst |
| public class SerializerHelper | |
| { | |
| SerializerHelper() | |
| { | |
| } | |
| public static void serializeToStream(System.IO.Stream stream, object obj) | |
| { | |
| if (obj == null) |
| static double f(double x, double y, double z, double w, double v) | |
| { | |
| return 34*Math.Sin(x) + 11*Math.Log(x) * Math.Cos(x) + x*x*v*Math.Sin(w)/Math.Cos(z*5*y) + x*3*Math.Sin(Math.Log(x)); | |
| } |
| <4>[19452.040679] penguin, get AP_PROFILE_SET | |
| <4>[19452.041076] wl_iw: set ap profile: | |
| <4>[19452.041442] ssid = AndrewsAndroidAP | |
| <4>[19452.042144] security = wpa-psk | |
| <4>[19452.042510] key = 1234567890 | |
| <4>[19452.042877] channel = 0 | |
| <4>[19452.043243] max scb = 2 | |
| <4>[19454.110931] Set auto channel = 1 | |
| <4>[19454.112182] wl_iw_setap: do passhash... | |
| <4>[19454.210723] [00]: aa2f2f2c |
| ./iwconfig eth0 | |
| eth0 IEEE 802.11-DS ESSID:"AndroidTether" Nickname:"" | |
| Mode:Master Frequency:2.412 GHz Access Point: 38:E7:D8:19:D7:0C | |
| Bit Rate=54 Mb/s Tx-Power:32 dBm | |
| Retry min limit:7 RTS thr:off Fragment thr:off | |
| Encryption key:off | |
| # |
| wl_iw_setap(struct net_device *dev, struct ap_profile *ap) | |
| { | |
| int updown = 0; | |
| int channel = 0; | |
| int wsec = 0; | |
| int wpa_auth = 0; | |
| int apstate = 1; | |
| wlc_ssid_t ap_ssid; | |
| wlc_ssid_t null_ssid; | |
| int max_assoc = 8; |