Als user script verwenden, zB in Tampermonkey oder einer anderen user script browser extension der Wahl:
(function () {
function shouldSkip(node) {
if (!node || !node.parentElement) return true;
// Avoid non-visible or code containers; text nodes only, no attributes touched.
return node.parentElement.closest("script, style, noscript, textarea");
3.5 fps, Paperwhite 3
@adtac_
mobileread.com is your best resource here, follow the instructions from the LanguageBreak thread
I didn't really follow the LanguageBreak instructions because I didn't care about most of the features + I was curious to do it myself, but the LanguageBreak github repo was invaluable for debugging
The purpose of this document is to simplify development for Flipper Zero platform.
It's my cure from
oh, great, now I have to rebuild my app. Again...DON'T PANIC!
| #!/bin/bash | |
| if ! command -v curl &> /dev/null; then | |
| echo "This script needs curl. Please install curl." | |
| exit -1 | |
| fi | |
| if ! command -v jq &> /dev/null; then | |
| echo "This script needs jq. Please install jq." | |
| exit -1 |
| # Credits: | |
| # - https://www.hackster.io/thatiotguy/enable-monitor-mode-in-tp-link-tl-wn722n-v2-v3-128fc6 | |
| # - https://github.com/aircrack-ng/rtl8188eus/issues/234 | |
| # Tested on Kali Linux 2022.3 | |
| # Commands used to Setup the Adapter from aircrack repository | |
| sudo apt update | |
| sudo apt install bc -y | |
| sudo rmmod r8188eu.ko | |
| git clone https://github.com/gglluukk/rtl8188eus | |
| cd rtl8188eus |
| ; Ender 5 Custom End G-code | |
| G4 ; Wait | |
| M220 S100 ; Reset Speed factor override percentage to default (100%) | |
| M221 S100 ; Reset Extrude factor override percentage to default (100%) | |
| G91 ; Set coordinates to relative | |
| G1 F1800 E-3 ; Retract filament 3 mm to prevent oozing | |
| G1 F3000 Z20 ; Move Z Axis up 20 mm to allow filament ooze freely | |
| G90 ; Set coordinates to absolute | |
| G1 X0 Y220 F1000 ; Move Heat Bed to the front for easy print removal | |
| M106 S0 ; Turn off cooling fan |
| Preface: | |
| I have no idea if any of this is the "right" way of doing it. This is just how I got my unit working. | |
| Good luck. | |
| WARNING: Do not use a V1 Waveshare display module with a stock pwnagotchi! The pwnagotchi expects a V2 module, and may irreparably damage a V1 module! | |
| A V1 display module *can* work, but you must modify `waveshare.py` and `display.py` beforehand. For the time being, this is left as an exercise for the reader. | |
| If you have already burnt a V1 display, try disconnecting it from the Pi and leaving it overnight. This may rejuvenate the display somewhat, but it will likely still display signs of damage. | |
| Installation: | |
| 1. `dd` Raspbian Lite to an SD card. |
| substitutions: | |
| device_name: your_device_name | |
| friendly_name: "Your Device Name" | |
| api_password: "pass1" | |
| ota_password: "pass2" | |
| esphome: | |
| name: ${device_name} | |
| platform: ESP8266 | |
| board: esp01_1m |
Europe
| Copyright (c) 2015, Dorian Rudolph | |
| Permission is hereby granted, free of charge, to any person obtaining a copy | |
| of this software and associated documentation files (the "Software"), to deal | |
| in the Software without restriction, including without limitation the rights | |
| to use, copy, modify, merge, publish, distribute, sublicense, and/or sell | |
| copies of the Software, and to permit persons to whom the Software is | |
| furnished to do so, subject to the following conditions: | |
| The above copyright notice and this permission notice shall be included in all |
