-
-
Save Mirdinus/be2de0134a5cb3f5d9037e9d192a4808 to your computer and use it in GitHub Desktop.
How to setup a Dumb AP, Wired backbone for OpenWRT / LEDE
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # ======================================================== | |
| # Setup a Dumb AP, Wired backbone for OpenWRT / LEDE | |
| # ======================================================== | |
| # Set lan logical interface as bridge (to allow bridge multiple physical interfaces) | |
| uci set network.lan.type='bridge' | |
| # assign WAN physical interface to LAN (will be available as an additional LAN port now) | |
| uci set network.lan.ifname="$(uci get network.lan.ifname) $(uci get network.wan.ifname)" | |
| uci del network.wan.ifname | |
| # Remove wan logical interface, since we will not need it. | |
| uci del network.wan | |
| # Disable Dnsmasq completely (it is important to commit or discard dhcp) | |
| uci commit dhcp; echo '' > /etc/config/dhcp | |
| /etc/init.d/dnsmasq disable | |
| /etc/init.d/dnsmasq stop | |
| # Set static network configuration (sample config for 192.168.1.0/24) | |
| # 192.168.1.1 is the Main Router | |
| uci set network.lan.ipaddr='192.168.1.2' | |
| uci set network.lan.dns='192.168.1.1' | |
| uci set network.lan.gateway='192.168.1.1' | |
| uci set network.lan.netmask='255.255.255.0' | |
| uci set network.lan.broadcast='192.168.1.255' | |
| # Set DHCP on LAN (not recommended, but useful when Dumb AP is moveable from one building to another) | |
| uci del network.lan.broadcast | |
| uci del network.lan.dns | |
| uci del network.lan.gateway | |
| uci del network.lan.ipaddr | |
| uci del network.lan.netmask | |
| uci set network.lan.proto='dhcp' | |
| # To identify better when connected to SSH and when seen on the network | |
| uci set system.@system[0].hostname='DumbAP1' | |
| uci set network.lan.hostname="`uci get system.@system[0].hostname`" | |
| # ======================================================== | |
| # Optional, Disable IPv6 | |
| # ======================================================== | |
| uci del network.lan.ip6assign | |
| uci set network.lan.delegate='0' | |
| uci del dhcp.lan.dhcpv6 | |
| uci del dhcp.lan.ra | |
| uci del dhcp.odhcpd | |
| /etc/init.d/odhcpd disable | |
| /etc/init.d/odhcpd stop | |
| # ======================================================== | |
| # Commit changes, flush, and restart network | |
| # ======================================================== | |
| # This way we will get internet on this AP and we must reconnect | |
| uci commit | |
| sync | |
| /etc/init.d/network restart | |
| # If all is OK then reboot and test again: | |
| reboot | |
| # How to setup Wireless Links to avoid Wired backbone using WDS on Atheros for OpenWRT / LEDE | |
| https://gist.github.com/braian87b/8a524a8ad74a36407a8f481e9d16a5c9 | |
| # How to setup Client Bridged / Client Mode / RelayD and IGMPProxy for OpenWRT / LEDE | |
| https://gist.github.com/braian87b/821e9e4f399918510c55619192a31871 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment