Created
September 20, 2024 00:35
-
-
Save Justme488/096fd852e8557baa26663fae466f7870 to your computer and use it in GitHub Desktop.
Ender 3 Direct Drive Settings For PETG Filament
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| PETG Cura Settings - Direct Drive | |
| "Best Attempt to Date" | |
| Standard quality | |
| Quality | |
| Layer Height - 0.2 mm | |
| Initial Layer Height - 0.2 mm | |
| Line Width - 0.4 mm | |
| Wall Line Width - 0.4 mm | |
| Outer Wall Line Width - 0.4 mm | |
| Inner Wall(s) Line Width - 0.4 mm | |
| Top/Bottom Line Width - 0.4 mm | |
| Infill Line Width - 0.4 mm | |
| Initial Layer Line Width - 100.0 % | |
| Walls | |
| Wall Thickness - 1.6 mm | |
| Wall Line Count - 4 | |
| Optimize Wall Printing Order - Box Checked | |
| Horizontal Expansion - 0.0 mm | |
| Top/Bottom | |
| Top/Bottom Thickness - 0.8 mm | |
| Top Thickness - 0.8 mm | |
| Top Layers - 4 | |
| Bottom Thickness - 0.8 | |
| Bottom Layers - 4 | |
| Monotonic Top/Bottom Order - Box Unchecked | |
| Small Top/Bottom Width - 0.8 mm | |
| Small Top/Bottom On Surface - Box Unchecked | |
| Enable Ironing - Box Unchecked | |
| Infill | |
| Infill Density - 20.0 % | |
| Infill Line Distance - 6.0 mm | |
| Infill Pattern - Cubic | |
| Infill Line Multiplier - 1 | |
| Infill Overlap Percentage - 30.0 % | |
| Infill Layer Thickness - 0.2 mm | |
| Gradual Infill Steps - 0 | |
| Material | |
| Printing Temperature - 240.0 C | |
| Printing Temperature Initial Layer - 240.0 C | |
| Initial Printing Temperature - 240.0 C | |
| Final Printing Temperature - 240.0 C | |
| Build Plate Temperature - 80.0 C | |
| Build Plate Temperature Initial Layer - 90.0 C | |
| Speed | |
| Print Speed - 50.0 mm/s | |
| Infill Speed - 50.0 mm/s | |
| Wall Speed - 40.0 mm/s | |
| Outer Wall Speed - 40.0 mm/s | |
| Inner Wall Speed - 40.0 mm/s | |
| Top/Bottom Speed - 25.0 mm/s | |
| Travel Speed - 290.0 mm/s | |
| Initial Layer Speed - 25.0 mm/s | |
| Skirt/Brim Speed - 25.0 mm/s | |
| Enable Acceleration Control - Box Unchecked | |
| Enable Jerk Control - Box Unchecked | |
| Travel | |
| Enable Retraction - Box Checked | |
| Retract At Layer Change - Box Unchecked | |
| Retraction Distance - 0.8 mm | |
| Retraction Speed - 35.0 mm/s | |
| Combining Mode - Not In Skin | |
| Avoid Printed Parts When Traveling - Box Checked | |
| Avoid Supports When Traveling - Box Checked | |
| Travel Avoid Distance - 0.625 mm | |
| Z Hop When Retracted - Box Unchecked | |
| Cooling | |
| Enable Print Cooling - Box Unchecked | |
| Regular/Maximum Fan Speed Threshhold - 10.0 s | |
| Regular Fan Speed At Height - 0.6 mm | |
| Regualar Fan Speed At Layer - 4 | |
| Minimum Layer Time - 10.0 s | |
| Minimum Speed - 10.0 s | |
| Lift Head - Box Unchecked |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment