Skip to content

Instantly share code, notes, and snippets.

@FlorianHeigl
Last active April 24, 2026 23:00
Show Gist options
  • Select an option

  • Save FlorianHeigl/9abc339d6beb8425263fd2f4abf0fe87 to your computer and use it in GitHub Desktop.

Select an option

Save FlorianHeigl/9abc339d6beb8425263fd2f4abf0fe87 to your computer and use it in GitHub Desktop.
liquidio ethtool bug
tschike:~# ethtool eth0
Settings for eth0:
Supported ports: [ FIBRE ]
Supported link modes: 10000baseKR/Full
25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
10000baseCR/Full
10000baseSR/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: No
Supported FEC modes: None RS
Advertised link modes: 10000baseKR/Full
10000baseCR/Full
10000baseSR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: None
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: off
Port: FIBRE
PHYAD: 0
Transceiver: external
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
tschike:~# ethtool eth1
Settings for eth1:
Supported ports: [ FIBRE ]
Supported link modes: 10000baseKR/Full
25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
10000baseCR/Full
10000baseSR/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: No
Supported FEC modes: None RS
Advertised link modes: 10000baseKR/Full
10000baseCR/Full
10000baseSR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: None
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: off
Port: FIBRE
PHYAD: 0
Transceiver: external
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
tschike:~# ethtool eth1
Settings for eth1:
Supported ports: [ FIBRE ]
Supported link modes: 25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: off
Port: FIBRE
PHYAD: 0
Transceiver: external
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
tschike:~# ethtool eth1
Settings for eth1:
Supported ports: [ FIBRE ]
Supported link modes: 25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: off
Port: FIBRE
PHYAD: 0
Transceiver: external
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
tschike:~# ethtool eth0
Settings for eth0:
Supported ports: [ FIBRE ]
Supported link modes: 10000baseKR/Full
25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
10000baseCR/Full
10000baseSR/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: No
Supported FEC modes: None RS
Advertised link modes: 10000baseKR/Full
10000baseCR/Full
10000baseSR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: None
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: off
Port: FIBRE
PHYAD: 0
Transceiver: external
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
tschike:~# ethtool eth1
Settings for eth1:
Supported ports: [ FIBRE ]
Supported link modes: 10000baseKR/Full
25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
10000baseCR/Full
10000baseSR/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: No
Supported FEC modes: None RS
Advertised link modes: 10000baseKR/Full
10000baseCR/Full
10000baseSR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: None
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: off
Port: FIBRE
PHYAD: 0
Transceiver: external
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
tschike:~# ethtool eth0 speed 250000
Settings for eth0:
Supported ports: [ FIBRE ]
Supported link modes: 10000baseKR/Full
25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
10000baseCR/Full
10000baseSR/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: off
Port: FIBRE
PHYAD: 0
Transceiver: external
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
tschike:~# ethtool -s eth0 speed 250000
netlink error: link settings update failed
netlink error: Not supported
tschike:~# dmesg
[ 0.000000] Linux version 6.18.19-0-lts-tschicke (floh@tschike) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-03-31 06:39:22
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-lts-tschicke root=/dev/mapper/vg0--tschicke-lv_root ro modules=sd-mod,usb-storage,ext4 quiet rootfstype=ext4 amd_pstate=guided vsyscall=emulate
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20d000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000b7b3afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7b3b000-0x00000000ba66ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba670000-0x00000000ba6b6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ba6b7000-0x00000000bbd6dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bbd6e000-0x00000000bcdfefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bcdff000-0x00000000bdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083e2fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000083e300000-0x000000083fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] efi: EFI v2.7 by American Megatrends
[ 0.000000] efi: ACPI=0xbbd57000 ACPI 2.0=0xbbd57014 SMBIOS=0xbcc05000 SMBIOS 3.0=0xbcc04000 MEMATTR=0xb335d698 ESRT=0xb6ecb918 INITRD=0xb3350518 RNG=0xba68b018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem310: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
[ 0.000000] e820: remove [mem 0xf0000000-0xf7ffffff] reserved
[ 0.000000] efi: Remove mem311: MMIO range=[0xfd200000-0xfd2fffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd200000-0xfd2fffff] reserved
[ 0.000000] efi: Remove mem312: MMIO range=[0xfd600000-0xfd6fffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd600000-0xfd6fffff] reserved
[ 0.000000] efi: Not removing mem313: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
[ 0.000000] efi: Remove mem314: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
[ 0.000000] e820: remove [mem 0xfeb80000-0xfec01fff] reserved
[ 0.000000] efi: Not removing mem315: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem316: MMIO range=[0xfec30000-0xfec30fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem317: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem318: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
[ 0.000000] efi: Not removing mem319: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[ 0.000000] efi: Not removing mem320: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
[ 0.000000] efi: Not removing mem321: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
[ 0.000000] efi: Remove mem322: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.3.0 present.
[ 0.000000] DMI: GIGABYTE MC12-LE0-00/MC12-LE0-00, BIOS F14 03/01/2024
[ 0.000000] DMI: Memory slots populated: 1/4
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3593.212 MHz processor
[ 0.000131] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000132] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000138] last_pfn = 0x83e300 max_arch_pfn = 0x400000000
[ 0.000143] MTRR map: 6 entries (4 fixed + 2 variable; max 21), built from 9 variable MTRRs
[ 0.000144] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000264] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000269] last_pfn = 0xbe000 max_arch_pfn = 0x400000000
[ 0.002836] esrt: Reserving ESRT space from 0x00000000b6ecb918 to 0x00000000b6ecb9a0.
[ 0.002845] e820: update [mem 0xb6ecb000-0xb6ecbfff] usable ==> reserved
[ 0.002871] Using GB pages for direct mapping
[ 0.003241] Secure boot disabled
[ 0.003242] RAMDISK: [mem 0xae5e6000-0xaf7f8fff]
[ 0.003245] ACPI: Early table checksum verification disabled
[ 0.003247] ACPI: RSDP 0x00000000BBD57014 000024 (v02 GBT )
[ 0.003250] ACPI: XSDT 0x00000000BBD56728 0000C4 (v01 GBT GBTUACPI 01072009 AMI 01000013)
[ 0.003253] ACPI: FACP 0x00000000BA6A7000 000114 (v06 GBT GBTUACPI 01072009 AMI 00010013)
[ 0.003256] ACPI: DSDT 0x00000000BA6A1000 005B79 (v02 GBT GBTUACPI 01072009 INTL 20120913)
[ 0.003258] ACPI: FACS 0x00000000BAD51000 000040
[ 0.003259] ACPI: IVRS 0x00000000BA6B6000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003260] ACPI: SPMI 0x00000000BA6B5000 000041 (v05 GBT GBTUACPI 00000000 AMI. 00000000)
[ 0.003262] ACPI: SSDT 0x00000000BA6AD000 0072B0 (v02 AMD Artic 00000002 MSFT 04000000)
[ 0.003263] ACPI: SSDT 0x00000000BA6A9000 003B8E (v02 AMD AMD AOD 00000001 INTL 20120913)
[ 0.003264] ACPI: SSDT 0x00000000BA6A8000 0001AD (v02 GBT CPUSSDT 01072009 AMI 01072009)
[ 0.003266] ACPI: FIDT 0x00000000BA6A0000 00009C (v01 GBT GBTUACPI 01072009 AMI 00010013)
[ 0.003267] ACPI: MCFG 0x00000000BA69F000 00003C (v01 GBT GBTUACPI 01072009 MSFT 00010013)
[ 0.003268] ACPI: HPET 0x00000000BA69E000 000038 (v01 GBT GBTUACPI 01072009 AMI 00000005)
[ 0.003269] ACPI: FPDT 0x00000000BA69D000 000044 (v01 GBT A M I 01072009 AMI 01000013)
[ 0.003271] ACPI: BGRT 0x00000000BA69C000 000038 (v01 GBT GBTUACPI 01072009 AMI 00010013)
[ 0.003272] ACPI: SSDT 0x00000000BA698000 003E88 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003273] ACPI: CRAT 0x00000000BA697000 000B68 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003274] ACPI: CDIT 0x00000000BA696000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003276] ACPI: SSDT 0x00000000BA692000 0037DC (v02 AMD ArticN 00000001 INTL 20120913)
[ 0.003277] ACPI: WSMT 0x00000000BA691000 000028 (v01 GBT GBTUACPI 01072009 AMI 00010013)
[ 0.003278] ACPI: APIC 0x00000000BA690000 00015E (v04 GBT GBTUACPI 01072009 AMI 00010013)
[ 0.003279] ACPI: SSDT 0x00000000BA68F000 00049F (v02 AMD ArticPRN 00000001 INTL 20120913)
[ 0.003281] ACPI: SSDT 0x00000000BA68D000 0010AF (v02 AMD ArticC 00000001 INTL 20120913)
[ 0.003282] ACPI: SSDT 0x00000000BA68C000 0000BF (v01 AMD AmdTable 00001000 INTL 20120913)
[ 0.003283] ACPI: Reserving FACP table memory at [mem 0xba6a7000-0xba6a7113]
[ 0.003284] ACPI: Reserving DSDT table memory at [mem 0xba6a1000-0xba6a6b78]
[ 0.003284] ACPI: Reserving FACS table memory at [mem 0xbad51000-0xbad5103f]
[ 0.003285] ACPI: Reserving IVRS table memory at [mem 0xba6b6000-0xba6b60cf]
[ 0.003285] ACPI: Reserving SPMI table memory at [mem 0xba6b5000-0xba6b5040]
[ 0.003285] ACPI: Reserving SSDT table memory at [mem 0xba6ad000-0xba6b42af]
[ 0.003286] ACPI: Reserving SSDT table memory at [mem 0xba6a9000-0xba6acb8d]
[ 0.003286] ACPI: Reserving SSDT table memory at [mem 0xba6a8000-0xba6a81ac]
[ 0.003286] ACPI: Reserving FIDT table memory at [mem 0xba6a0000-0xba6a009b]
[ 0.003287] ACPI: Reserving MCFG table memory at [mem 0xba69f000-0xba69f03b]
[ 0.003287] ACPI: Reserving HPET table memory at [mem 0xba69e000-0xba69e037]
[ 0.003288] ACPI: Reserving FPDT table memory at [mem 0xba69d000-0xba69d043]
[ 0.003288] ACPI: Reserving BGRT table memory at [mem 0xba69c000-0xba69c037]
[ 0.003288] ACPI: Reserving SSDT table memory at [mem 0xba698000-0xba69be87]
[ 0.003289] ACPI: Reserving CRAT table memory at [mem 0xba697000-0xba697b67]
[ 0.003289] ACPI: Reserving CDIT table memory at [mem 0xba696000-0xba696028]
[ 0.003290] ACPI: Reserving SSDT table memory at [mem 0xba692000-0xba6957db]
[ 0.003290] ACPI: Reserving WSMT table memory at [mem 0xba691000-0xba691027]
[ 0.003290] ACPI: Reserving APIC table memory at [mem 0xba690000-0xba69015d]
[ 0.003291] ACPI: Reserving SSDT table memory at [mem 0xba68f000-0xba68f49e]
[ 0.003291] ACPI: Reserving SSDT table memory at [mem 0xba68d000-0xba68e0ae]
[ 0.003291] ACPI: Reserving SSDT table memory at [mem 0xba68c000-0xba68c0be]
[ 0.003341] No NUMA configuration found
[ 0.003342] Faking a node at [mem 0x0000000000000000-0x000000083e2fffff]
[ 0.003344] NODE_DATA(0) allocated [mem 0x83e2fae40-0x83e2fffff]
[ 0.003374] Zone ranges:
[ 0.003374] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.003375] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.003376] Normal [mem 0x0000000100000000-0x000000083e2fffff]
[ 0.003377] Device empty
[ 0.003377] Movable zone start for each node
[ 0.003378] Early memory node ranges
[ 0.003378] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.003379] node 0: [mem 0x0000000000100000-0x0000000009bfefff]
[ 0.003379] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.003379] node 0: [mem 0x000000000a20d000-0x000000000affffff]
[ 0.003380] node 0: [mem 0x000000000b020000-0x00000000b7b3afff]
[ 0.003380] node 0: [mem 0x00000000bcdff000-0x00000000bdffffff]
[ 0.003381] node 0: [mem 0x0000000100000000-0x000000083e2fffff]
[ 0.003383] Initmem setup node 0 [mem 0x0000000000001000-0x000000083e2fffff]
[ 0.003386] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.003398] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.003495] On node 0, zone DMA32: 1025 pages in unavailable ranges
[ 0.003505] On node 0, zone DMA32: 13 pages in unavailable ranges
[ 0.006986] On node 0, zone DMA32: 32 pages in unavailable ranges
[ 0.007140] On node 0, zone DMA32: 21188 pages in unavailable ranges
[ 0.051226] On node 0, zone Normal: 8192 pages in unavailable ranges
[ 0.051274] On node 0, zone Normal: 7424 pages in unavailable ranges
[ 0.051938] ACPI: PM-Timer IO Port: 0x808
[ 0.051946] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.051957] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[ 0.051962] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[ 0.051963] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.051965] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.051967] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.051968] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.051981] e820: update [mem 0xb3d3f000-0xb3f7ffff] usable ==> reserved
[ 0.051993] CPU topo: Max. logical packages: 1
[ 0.051993] CPU topo: Max. logical dies: 1
[ 0.051994] CPU topo: Max. dies per package: 1
[ 0.051996] CPU topo: Max. threads per core: 2
[ 0.051997] CPU topo: Num. cores per package: 6
[ 0.051998] CPU topo: Num. threads per package: 12
[ 0.051998] CPU topo: Allowing 12 present CPUs plus 0 hotplug CPUs
[ 0.052018] [mem 0xc0000000-0xfe9fffff] available for PCI devices
[ 0.052020] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.054998] setup_percpu: NR_CPUS:256 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.055470] percpu: Embedded 55 pages/cpu s186584 r8192 d30504 u262144
[ 0.055474] pcpu-alloc: s186584 r8192 d30504 u262144 alloc=1*2097152
[ 0.055475] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[ 0.055490] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-lts-tschicke root=/dev/mapper/vg0--tschicke-lv_root ro modules=sd-mod,usb-storage,ext4 quiet rootfstype=ext4 amd_pstate=guided vsyscall=emulate
[ 0.055533] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.055550] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.058538] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.060080] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.060176] software IO TLB: area num 16.
[ 0.072381] Fallback order for Node 0: 0
[ 0.072387] Built 1 zonelists, mobility grouping on. Total pages: 8350637
[ 0.072388] Policy zone: Normal
[ 0.072620] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.128816] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.128820] kmemleak: Kernel memory leak detector disabled
[ 0.136052] ftrace: allocating 44443 entries in 176 pages
[ 0.136053] ftrace: allocated 176 pages with 3 groups
[ 0.136606] Dynamic Preempt: voluntary
[ 0.136649] rcu: Preemptible hierarchical RCU implementation.
[ 0.136650] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
[ 0.136651] Trampoline variant of Tasks RCU enabled.
[ 0.136651] Rude variant of Tasks RCU enabled.
[ 0.136651] Tracing variant of Tasks RCU enabled.
[ 0.136652] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.136652] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 0.136660] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[ 0.136662] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[ 0.136663] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[ 0.139356] NR_IRQS: 16640, nr_irqs: 1064, preallocated irqs: 16
[ 0.139537] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.139628] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.139655] Console: colour dummy device 80x25
[ 0.139657] printk: legacy console [tty0] enabled
[ 0.139684] ACPI: Core revision 20250807
[ 0.139768] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.139784] APIC: Switch to symmetric I/O mode setup
[ 0.140206] AMD-Vi: Using global IVHD EFR:0x206d73ef22254ade, EFR2:0x0
[ 0.140480] x2apic enabled
[ 0.140517] APIC: Switched APIC routing to: cluster x2apic
[ 0.141133] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.145792] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33cb46d84d1, max_idle_ns: 440795320623 ns
[ 0.145795] Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.42 BogoMIPS (lpj=3593212)
[ 0.145812] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.145835] LVT offset 1 assigned for vector 0xf9
[ 0.145918] LVT offset 2 assigned for vector 0xf4
[ 0.145953] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[ 0.145954] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.145957] process: using mwait in idle threads
[ 0.145958] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.145961] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.145962] Transient Scheduler Attacks: Vulnerable: No microcode
[ 0.145963] Spectre V2 : Mitigation: Retpolines
[ 0.145963] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.145964] Speculative Return Stack Overflow: Mitigation: Safe RET
[ 0.145965] VMSCAPE: Mitigation: IBPB before exit to userspace
[ 0.145965] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.145966] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.145967] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.145968] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.145969] active return thunk: srso_alias_return_thunk
[ 0.145976] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.145977] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.145978] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.145978] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.145979] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[ 0.145979] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
[ 0.145981] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.145981] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
[ 0.145982] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
[ 0.145983] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24
[ 0.145983] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format.
[ 0.162000] Freeing SMP alternatives memory: 44K
[ 0.162003] pid_max: default: 32768 minimum: 301
[ 0.162041] LSM: initializing lsm=lockdown,capability,landlock,yama
[ 0.162115] landlock: Up and running.
[ 0.162116] Yama: becoming mindful.
[ 0.162169] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.162213] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.264636] smpboot: CPU0: AMD Ryzen 5 5600GT with Radeon Graphics (family: 0x19, model: 0x50, stepping: 0x0)
[ 0.264793] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.264793] ... version: 0
[ 0.264793] ... bit width: 48
[ 0.264793] ... generic counters: 6
[ 0.264793] ... generic bitmap: 000000000000003f
[ 0.264793] ... fixed-purpose counters: 0
[ 0.264793] ... fixed-purpose bitmap: 0000000000000000
[ 0.264793] ... value mask: 0000ffffffffffff
[ 0.264793] ... max period: 00007fffffffffff
[ 0.264793] ... global_ctrl mask: 000000000000003f
[ 0.264793] signal: max sigframe size: 3376
[ 0.264793] rcu: Hierarchical SRCU implementation.
[ 0.264793] rcu: Max phase no-delay instances is 400.
[ 0.264793] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[ 0.267146] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.267260] smp: Bringing up secondary CPUs ...
[ 0.267385] smpboot: x86: Booting SMP configuration:
[ 0.267387] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
[ 0.275885] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.281826] smp: Brought up 1 node, 12 CPUs
[ 0.281826] smpboot: Total of 12 processors activated (86237.08 BogoMIPS)
[ 0.282934] Memory: 32581936K/33402548K available (15884K kernel code, 2037K rwdata, 10768K rodata, 3068K init, 4816K bss, 802596K reserved, 0K cma-reserved)
[ 0.283359] devtmpfs: initialized
[ 0.283359] x86/mm: Memory block size: 128MB
[ 0.287203] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20cfff] (53248 bytes)
[ 0.287203] ACPI: PM: Registering ACPI NVS region [mem 0xba6b7000-0xbbd6dfff] (23818240 bytes)
[ 0.287277] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.287277] posixtimers hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.287277] futex hash table entries: 4096 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear).
[ 0.287835] pinctrl core: initialized pinctrl subsystem
[ 0.288324] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.288470] audit: initializing netlink subsys (disabled)
[ 0.288476] audit: type=2000 audit(1777070248.148:1): state=initialized audit_enabled=0 res=1
[ 0.288476] thermal_sys: Registered thermal governor 'fair_share'
[ 0.288476] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.288476] thermal_sys: Registered thermal governor 'step_wise'
[ 0.288476] thermal_sys: Registered thermal governor 'user_space'
[ 0.288476] cpuidle: using governor ladder
[ 0.288476] cpuidle: using governor menu
[ 0.292444] efi: Freeing EFI boot services memory: 91452K
[ 0.292448] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.292538] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[ 0.292549] PCI: Using configuration type 1 for base access
[ 0.292657] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.292883] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.292885] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.292887] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.292888] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.294286] ACPI: Added _OSI(Module Device)
[ 0.294288] ACPI: Added _OSI(Processor Device)
[ 0.294290] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.307419] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.309527] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.315281] ACPI: Interpreter enabled
[ 0.315290] ACPI: PM: (supports S0 S5)
[ 0.315292] ACPI: Using IOAPIC for interrupt routing
[ 0.315637] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.315638] PCI: Ignoring E820 reservations for host bridge windows
[ 0.316023] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.327131] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.327136] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.327213] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.327348] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.327358] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.327713] PCI host bridge to bus 0000:00
[ 0.327717] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.327719] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.327721] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.327722] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.327724] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.327726] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff window]
[ 0.327727] pci_bus 0000:00: root bus resource [mem 0x840000000-0xffffffffff window]
[ 0.327729] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.327742] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 conventional PCI endpoint
[ 0.327853] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600 conventional PCI endpoint
[ 0.327962] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
[ 0.328028] pci 0000:00:01.1: [1022:1634] type 01 class 0x060400 PCIe Root Port
[ 0.328041] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.328046] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.328052] pci 0000:00:01.1: bridge window [mem 0xffec000000-0xfffd1fffff 64bit pref]
[ 0.328092] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.328201] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
[ 0.328268] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400 PCIe Root Port
[ 0.328281] pci 0000:00:02.1: PCI bridge to [bus 02-08]
[ 0.328285] pci 0000:00:02.1: bridge window [io 0xd000-0xffff]
[ 0.328287] pci 0000:00:02.1: bridge window [mem 0xfa000000-0xfc5fffff]
[ 0.328298] pci 0000:00:02.1: enabling Extended Tags
[ 0.328331] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.328437] pci 0000:00:02.2: [1022:1633] type 01 class 0x060400 PCIe Root Port
[ 0.328449] pci 0000:00:02.2: PCI bridge to [bus 09-0c]
[ 0.328454] pci 0000:00:02.2: bridge window [mem 0xfcb00000-0xfcefffff]
[ 0.328460] pci 0000:00:02.2: bridge window [mem 0xfffd300000-0xfffd5fffff 64bit pref]
[ 0.328466] pci 0000:00:02.2: enabling Extended Tags
[ 0.328499] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.328598] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
[ 0.328663] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 PCIe Root Port
[ 0.328675] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.328680] pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff]
[ 0.328689] pci 0000:00:08.1: enabling Extended Tags
[ 0.328723] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.328868] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.328986] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[ 0.329121] pci 0000:00:18.0: [1022:166a] type 00 class 0x060000 conventional PCI endpoint
[ 0.329161] pci 0000:00:18.1: [1022:166b] type 00 class 0x060000 conventional PCI endpoint
[ 0.329203] pci 0000:00:18.2: [1022:166c] type 00 class 0x060000 conventional PCI endpoint
[ 0.329243] pci 0000:00:18.3: [1022:166d] type 00 class 0x060000 conventional PCI endpoint
[ 0.329283] pci 0000:00:18.4: [1022:166e] type 00 class 0x060000 conventional PCI endpoint
[ 0.329322] pci 0000:00:18.5: [1022:166f] type 00 class 0x060000 conventional PCI endpoint
[ 0.329361] pci 0000:00:18.6: [1022:1670] type 00 class 0x060000 conventional PCI endpoint
[ 0.329402] pci 0000:00:18.7: [1022:1671] type 00 class 0x060000 conventional PCI endpoint
[ 0.329498] pci 0000:01:00.0: [177d:9702] type 00 class 0x020000 PCIe Endpoint
[ 0.329529] pci 0000:01:00.0: BAR 0 [mem 0xfff4800000-0xfff4ffffff 64bit pref]
[ 0.329532] pci 0000:01:00.0: BAR 2 [mem 0xfff0000000-0xfff3ffffff 64bit pref]
[ 0.329536] pci 0000:01:00.0: BAR 4 [mem 0xfffd100000-0xfffd1fffff 64bit pref]
[ 0.329538] pci 0000:01:00.0: ROM [mem 0xfcf10000-0xfcf1ffff pref]
[ 0.329626] pci 0000:01:00.0: VF BAR 0 [mem 0xfff9000000-0xfff90fffff 64bit pref]
[ 0.329628] pci 0000:01:00.0: VF BAR 0 [mem 0xfff9000000-0xfffcffffff 64bit pref]: contains BAR 0 for 64 VFs
[ 0.329790] pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:01.1 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 0.329866] pci 0000:01:00.1: [177d:9702] type 00 class 0x020000 PCIe Endpoint
[ 0.329897] pci 0000:01:00.1: BAR 0 [mem 0xfff4000000-0xfff47fffff 64bit pref]
[ 0.329900] pci 0000:01:00.1: BAR 2 [mem 0xffec000000-0xffefffffff 64bit pref]
[ 0.329903] pci 0000:01:00.1: BAR 4 [mem 0xfffd000000-0xfffd0fffff 64bit pref]
[ 0.329906] pci 0000:01:00.1: ROM [mem 0xfcf00000-0xfcf0ffff pref]
[ 0.329987] pci 0000:01:00.1: VF BAR 0 [mem 0xfff5000000-0xfff50fffff 64bit pref]
[ 0.329988] pci 0000:01:00.1: VF BAR 0 [mem 0xfff5000000-0xfff8ffffff 64bit pref]: contains BAR 0 for 64 VFs
[ 0.330203] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.330260] pci 0000:02:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
[ 0.330296] pci 0000:02:00.0: BAR 0 [mem 0xfc5a0000-0xfc5a7fff 64bit]
[ 0.330308] pci 0000:02:00.0: enabling Extended Tags
[ 0.330364] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.330507] pci 0000:02:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
[ 0.330547] pci 0000:02:00.1: BAR 5 [mem 0xfc580000-0xfc59ffff]
[ 0.330550] pci 0000:02:00.1: ROM [mem 0xfc500000-0xfc57ffff pref]
[ 0.330557] pci 0000:02:00.1: enabling Extended Tags
[ 0.330601] pci 0000:02:00.1: PME# supported from D3hot D3cold
[ 0.330683] pci 0000:02:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
[ 0.330708] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[ 0.330714] pci 0000:02:00.2: bridge window [io 0xd000-0xffff]
[ 0.330717] pci 0000:02:00.2: bridge window [mem 0xfa000000-0xfc4fffff]
[ 0.330737] pci 0000:02:00.2: enabling Extended Tags
[ 0.330783] pci 0000:02:00.2: PME# supported from D3hot D3cold
[ 0.330865] pci 0000:00:02.1: PCI bridge to [bus 02-08]
[ 0.330926] pci 0000:03:06.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.330951] pci 0000:03:06.0: PCI bridge to [bus 04-05]
[ 0.330957] pci 0000:03:06.0: bridge window [io 0xf000-0xffff]
[ 0.330961] pci 0000:03:06.0: bridge window [mem 0xfa000000-0xfc0fffff]
[ 0.330983] pci 0000:03:06.0: enabling Extended Tags
[ 0.331038] pci 0000:03:06.0: PME# supported from D3hot D3cold
[ 0.331130] pci 0000:03:07.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.331155] pci 0000:03:07.0: PCI bridge to [bus 06]
[ 0.331163] pci 0000:03:07.0: bridge window [mem 0xfc400000-0xfc4fffff]
[ 0.331186] pci 0000:03:07.0: enabling Extended Tags
[ 0.331240] pci 0000:03:07.0: PME# supported from D3hot D3cold
[ 0.331334] pci 0000:03:08.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.331359] pci 0000:03:08.0: PCI bridge to [bus 07]
[ 0.331365] pci 0000:03:08.0: bridge window [io 0xe000-0xefff]
[ 0.331368] pci 0000:03:08.0: bridge window [mem 0xfc300000-0xfc3fffff]
[ 0.331391] pci 0000:03:08.0: enabling Extended Tags
[ 0.331445] pci 0000:03:08.0: PME# supported from D3hot D3cold
[ 0.331538] pci 0000:03:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.331563] pci 0000:03:09.0: PCI bridge to [bus 08]
[ 0.331569] pci 0000:03:09.0: bridge window [io 0xd000-0xdfff]
[ 0.331573] pci 0000:03:09.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.331595] pci 0000:03:09.0: enabling Extended Tags
[ 0.331650] pci 0000:03:09.0: PME# supported from D3hot D3cold
[ 0.331747] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[ 0.331825] pci 0000:04:00.0: [1a03:1150] type 01 class 0x060400 PCIe to PCI/PCI-X bridge
[ 0.331866] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.331875] pci 0000:04:00.0: bridge window [io 0xf000-0xffff]
[ 0.331880] pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfc0fffff]
[ 0.331913] pci 0000:04:00.0: enabling Extended Tags
[ 0.332003] pci 0000:04:00.0: supports D1 D2
[ 0.332005] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.332126] pci 0000:03:06.0: PCI bridge to [bus 04-05]
[ 0.332187] pci_bus 0000:05: extended config space not accessible
[ 0.332213] pci 0000:05:00.0: [1a03:2000] type 00 class 0x030000 conventional PCI endpoint
[ 0.332285] pci 0000:05:00.0: BAR 0 [mem 0xfa000000-0xfbffffff]
[ 0.332288] pci 0000:05:00.0: BAR 1 [mem 0xfc000000-0xfc01ffff]
[ 0.332292] pci 0000:05:00.0: BAR 2 [io 0xf000-0xf07f]
[ 0.332319] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.332368] pci 0000:05:00.0: supports D1 D2
[ 0.332370] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.332491] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.332581] pci 0000:06:00.0: [144d:a809] type 00 class 0x010802 PCIe Endpoint
[ 0.332643] pci 0000:06:00.0: BAR 0 [mem 0xfc400000-0xfc403fff 64bit]
[ 0.332871] pci 0000:06:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:03:07.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 0.332942] pci 0000:03:07.0: PCI bridge to [bus 06]
[ 0.333035] pci 0000:07:00.0: working around ROM BAR overlap defect
[ 0.333037] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint
[ 0.333126] pci 0000:07:00.0: BAR 0 [mem 0xfc300000-0xfc37ffff]
[ 0.333132] pci 0000:07:00.0: BAR 2 [io 0xe000-0xe01f]
[ 0.333136] pci 0000:07:00.0: BAR 3 [mem 0xfc380000-0xfc383fff]
[ 0.333288] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.333468] pci 0000:03:08.0: PCI bridge to [bus 07]
[ 0.333563] pci 0000:08:00.0: working around ROM BAR overlap defect
[ 0.333565] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint
[ 0.333654] pci 0000:08:00.0: BAR 0 [mem 0xfc200000-0xfc27ffff]
[ 0.333660] pci 0000:08:00.0: BAR 2 [io 0xd000-0xd01f]
[ 0.333664] pci 0000:08:00.0: BAR 3 [mem 0xfc280000-0xfc283fff]
[ 0.333817] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.333997] pci 0000:03:09.0: PCI bridge to [bus 08]
[ 0.334081] pci 0000:09:00.0: [10b5:8718] type 01 class 0x060400 PCIe Switch Upstream Port
[ 0.334099] pci 0000:09:00.0: BAR 0 [mem 0xfce00000-0xfce3ffff]
[ 0.334103] pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
[ 0.334109] pci 0000:09:00.0: bridge window [mem 0xfcb00000-0xfcdfffff]
[ 0.334117] pci 0000:09:00.0: bridge window [mem 0xfffd300000-0xfffd5fffff 64bit pref]
[ 0.334189] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.334296] pci 0000:00:02.2: PCI bridge to [bus 09-0c]
[ 0.334344] pci 0000:0a:01.0: [10b5:8718] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.334364] pci 0000:0a:01.0: PCI bridge to [bus 0b]
[ 0.334371] pci 0000:0a:01.0: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.334379] pci 0000:0a:01.0: bridge window [mem 0xfffd500000-0xfffd5fffff 64bit pref]
[ 0.334453] pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold
[ 0.334567] pci 0000:0a:02.0: [10b5:8718] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.334587] pci 0000:0a:02.0: PCI bridge to [bus 0c]
[ 0.334594] pci 0000:0a:02.0: bridge window [mem 0xfcb00000-0xfccfffff]
[ 0.334602] pci 0000:0a:02.0: bridge window [mem 0xfffd300000-0xfffd4fffff 64bit pref]
[ 0.334676] pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold
[ 0.334800] pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
[ 0.334940] pci 0000:0b:00.0: [10df:e200] type 00 class 0x0c0400 PCIe Endpoint
[ 0.335606] pci 0000:0b:00.0: BAR 0 [mem 0xfffd508000-0xfffd50ffff 64bit pref]
[ 0.335633] pci 0000:0b:00.0: BAR 4 [mem 0xfffd510000-0xfffd510fff 64bit pref]
[ 0.335640] pci 0000:0b:00.0: ROM [mem 0xfcd80000-0xfcdfffff pref]
[ 0.335669] pci 0000:0b:00.0: enabling Extended Tags
[ 0.336691] pci 0000:0b:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:0a:01.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 0.336936] pci 0000:0b:00.1: [10df:e200] type 00 class 0x0c0400 PCIe Endpoint
[ 0.337590] pci 0000:0b:00.1: BAR 0 [mem 0xfffd500000-0xfffd507fff 64bit pref]
[ 0.337622] pci 0000:0b:00.1: ROM [mem 0xfcd00000-0xfcd7ffff pref]
[ 0.337650] pci 0000:0b:00.1: enabling Extended Tags
[ 0.339828] pci 0000:0a:01.0: PCI bridge to [bus 0b]
[ 0.339888] pci 0000:0c:00.0: [10df:0720] type 00 class 0x020000 PCIe Endpoint
[ 0.339936] pci 0000:0c:00.0: BAR 0 [mem 0xfffd40c000-0xfffd40ffff 64bit pref]
[ 0.339940] pci 0000:0c:00.0: BAR 2 [mem 0xfffd3e0000-0xfffd3fffff 64bit pref]
[ 0.339944] pci 0000:0c:00.0: BAR 4 [mem 0xfffd3c0000-0xfffd3dffff 64bit pref]
[ 0.339946] pci 0000:0c:00.0: ROM [mem 0xfcc80000-0xfccfffff pref]
[ 0.339955] pci 0000:0c:00.0: enabling Extended Tags
[ 0.340039] pci 0000:0c:00.0: PME# supported from D3hot D3cold
[ 0.340109] pci 0000:0c:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:0a:02.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 0.340195] pci 0000:0c:00.1: [10df:0720] type 00 class 0x020000 PCIe Endpoint
[ 0.340243] pci 0000:0c:00.1: BAR 0 [mem 0xfffd408000-0xfffd40bfff 64bit pref]
[ 0.340247] pci 0000:0c:00.1: BAR 2 [mem 0xfffd3a0000-0xfffd3bffff 64bit pref]
[ 0.340251] pci 0000:0c:00.1: BAR 4 [mem 0xfffd380000-0xfffd39ffff 64bit pref]
[ 0.340254] pci 0000:0c:00.1: ROM [mem 0xfcc00000-0xfcc7ffff pref]
[ 0.340262] pci 0000:0c:00.1: enabling Extended Tags
[ 0.340339] pci 0000:0c:00.1: PME# supported from D3hot D3cold
[ 0.340475] pci 0000:0c:00.2: [10df:0723] type 00 class 0x018000 PCIe Endpoint
[ 0.340521] pci 0000:0c:00.2: BAR 0 [mem 0xfffd404000-0xfffd407fff 64bit pref]
[ 0.340525] pci 0000:0c:00.2: BAR 2 [mem 0xfffd360000-0xfffd37ffff 64bit pref]
[ 0.340529] pci 0000:0c:00.2: BAR 4 [mem 0xfffd340000-0xfffd35ffff 64bit pref]
[ 0.340531] pci 0000:0c:00.2: ROM [mem 0xfcb80000-0xfcbfffff pref]
[ 0.340540] pci 0000:0c:00.2: enabling Extended Tags
[ 0.340617] pci 0000:0c:00.2: PME# supported from D3hot D3cold
[ 0.340752] pci 0000:0c:00.3: [10df:0723] type 00 class 0x018000 PCIe Endpoint
[ 0.340799] pci 0000:0c:00.3: BAR 0 [mem 0xfffd400000-0xfffd403fff 64bit pref]
[ 0.340803] pci 0000:0c:00.3: BAR 2 [mem 0xfffd320000-0xfffd33ffff 64bit pref]
[ 0.340807] pci 0000:0c:00.3: BAR 4 [mem 0xfffd300000-0xfffd31ffff 64bit pref]
[ 0.340810] pci 0000:0c:00.3: ROM [mem 0xfcb00000-0xfcb7ffff pref]
[ 0.340818] pci 0000:0c:00.3: enabling Extended Tags
[ 0.340895] pci 0000:0c:00.3: PME# supported from D3hot D3cold
[ 0.342827] pci 0000:0a:02.0: PCI bridge to [bus 0c]
[ 0.342962] pci 0000:0d:00.0: [1022:145a] type 00 class 0x130000 PCIe Legacy Endpoint
[ 0.342993] pci 0000:0d:00.0: enabling Extended Tags
[ 0.343174] pci 0000:0d:00.2: [1022:15df] type 00 class 0x108000 PCIe Endpoint
[ 0.343200] pci 0000:0d:00.2: BAR 2 [mem 0xfc900000-0xfc9fffff]
[ 0.343204] pci 0000:0d:00.2: BAR 5 [mem 0xfca48000-0xfca49fff]
[ 0.343210] pci 0000:0d:00.2: enabling Extended Tags
[ 0.343355] pci 0000:0d:00.3: [1022:1639] type 00 class 0x0c0330 PCIe Endpoint
[ 0.343381] pci 0000:0d:00.3: BAR 0 [mem 0xfc800000-0xfc8fffff 64bit]
[ 0.343390] pci 0000:0d:00.3: enabling Extended Tags
[ 0.343430] pci 0000:0d:00.3: PME# supported from D0 D3hot D3cold
[ 0.343542] pci 0000:0d:00.4: [1022:1639] type 00 class 0x0c0330 PCIe Endpoint
[ 0.343564] pci 0000:0d:00.4: BAR 0 [mem 0xfc700000-0xfc7fffff 64bit]
[ 0.343572] pci 0000:0d:00.4: enabling Extended Tags
[ 0.343606] pci 0000:0d:00.4: PME# supported from D0 D3hot D3cold
[ 0.343696] pci 0000:0d:00.5: [1022:15e2] type 00 class 0x048000 PCIe Endpoint
[ 0.343716] pci 0000:0d:00.5: BAR 0 [mem 0xfca00000-0xfca3ffff]
[ 0.343724] pci 0000:0d:00.5: enabling Extended Tags
[ 0.343756] pci 0000:0d:00.5: PME# supported from D0 D3hot D3cold
[ 0.343841] pci 0000:0d:00.6: [1022:15e3] type 00 class 0x040300 PCIe Endpoint
[ 0.343862] pci 0000:0d:00.6: BAR 0 [mem 0xfca40000-0xfca47fff]
[ 0.343870] pci 0000:0d:00.6: enabling Extended Tags
[ 0.343902] pci 0000:0d:00.6: PME# supported from D0 D3hot D3cold
[ 0.344001] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.346522] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.346569] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.346609] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.346658] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.346702] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.346739] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.346776] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.346816] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.347502] iommu: Default domain type: Translated
[ 0.347504] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.347518] pps_core: LinuxPPS API ver. 1 registered
[ 0.347518] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.347518] PTP clock support registered
[ 0.347809] efivars: Registered efivars operations
[ 0.348015] NetLabel: Initializing
[ 0.348017] NetLabel: domain hash size = 128
[ 0.348018] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.348035] NetLabel: unlabeled traffic allowed by default
[ 0.348040] PCI: Using ACPI for IRQ routing
[ 0.352031] PCI: pci_cache_line_size set to 64 bytes
[ 0.352135] e820: reserve RAM buffer [mem 0x09bff000-0x0bffffff]
[ 0.352137] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.352138] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.352139] e820: reserve RAM buffer [mem 0xb3d3f000-0xb3ffffff]
[ 0.352141] e820: reserve RAM buffer [mem 0xb6ecb000-0xb7ffffff]
[ 0.352142] e820: reserve RAM buffer [mem 0xb7b3b000-0xb7ffffff]
[ 0.352143] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
[ 0.352144] e820: reserve RAM buffer [mem 0x83e300000-0x83fffffff]
[ 0.352222] pci 0000:05:00.0: vgaarb: setting as boot VGA device
[ 0.352222] pci 0000:05:00.0: vgaarb: bridge control possible
[ 0.352222] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.352222] vgaarb: loaded
[ 0.352222] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.352222] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.353827] clocksource: Switched to clocksource tsc-early
[ 0.353964] pnp: PnP ACPI init
[ 0.354040] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.354107] system 00:01: [mem 0x1000000000000 window] could not be reserved
[ 0.354356] system 00:03: [io 0x0a00-0x0a0f] has been reserved
[ 0.354359] system 00:03: [io 0x0a10-0x0a1f] has been reserved
[ 0.354360] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 0.354362] system 00:03: [io 0x0a30-0x0a3f] has been reserved
[ 0.354364] system 00:03: [io 0x0a40-0x0a4f] has been reserved
[ 0.354566] pnp 00:04: [dma 0 disabled]
[ 0.354809] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.354812] system 00:05: [io 0x040b] has been reserved
[ 0.354813] system 00:05: [io 0x04d6] has been reserved
[ 0.354815] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.354817] system 00:05: [io 0x0c14] has been reserved
[ 0.354818] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.354820] system 00:05: [io 0x0c52] has been reserved
[ 0.354822] system 00:05: [io 0x0c6c] has been reserved
[ 0.354823] system 00:05: [io 0x0c6f] has been reserved
[ 0.354825] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.354827] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.354828] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.354830] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.354832] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.354833] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.354835] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.354837] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.354839] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.354841] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.354843] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.354844] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.354846] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.355415] pnp: PnP ACPI: found 6 devices
[ 0.361317] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.361393] NET: Registered PF_INET protocol family
[ 0.361553] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.371107] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.371132] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.371278] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.371551] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.371633] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.371759] MPTCP token hash table entries: 32768 (order: 8, 786432 bytes, linear)
[ 0.371853] UDP hash table entries: 16384 (order: 8, 1048576 bytes, linear)
[ 0.371978] UDP-Lite hash table entries: 16384 (order: 8, 1048576 bytes, linear)
[ 0.372064] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.372071] NET: Registered PF_XDP protocol family
[ 0.372091] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.372095] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.372098] pci 0000:00:01.1: bridge window [mem 0xffec000000-0xfffd1fffff 64bit pref]
[ 0.372104] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.372112] pci 0000:04:00.0: bridge window [io 0xf000-0xffff]
[ 0.372118] pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfc0fffff]
[ 0.372130] pci 0000:03:06.0: PCI bridge to [bus 04-05]
[ 0.372132] pci 0000:03:06.0: bridge window [io 0xf000-0xffff]
[ 0.372136] pci 0000:03:06.0: bridge window [mem 0xfa000000-0xfc0fffff]
[ 0.372144] pci 0000:03:07.0: PCI bridge to [bus 06]
[ 0.372148] pci 0000:03:07.0: bridge window [mem 0xfc400000-0xfc4fffff]
[ 0.372156] pci 0000:03:08.0: PCI bridge to [bus 07]
[ 0.372159] pci 0000:03:08.0: bridge window [io 0xe000-0xefff]
[ 0.372163] pci 0000:03:08.0: bridge window [mem 0xfc300000-0xfc3fffff]
[ 0.372170] pci 0000:03:09.0: PCI bridge to [bus 08]
[ 0.372173] pci 0000:03:09.0: bridge window [io 0xd000-0xdfff]
[ 0.372177] pci 0000:03:09.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.372184] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[ 0.372187] pci 0000:02:00.2: bridge window [io 0xd000-0xffff]
[ 0.372191] pci 0000:02:00.2: bridge window [mem 0xfa000000-0xfc4fffff]
[ 0.372198] pci 0000:00:02.1: PCI bridge to [bus 02-08]
[ 0.372200] pci 0000:00:02.1: bridge window [io 0xd000-0xffff]
[ 0.372203] pci 0000:00:02.1: bridge window [mem 0xfa000000-0xfc5fffff]
[ 0.372208] pci 0000:0a:01.0: PCI bridge to [bus 0b]
[ 0.372214] pci 0000:0a:01.0: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.372217] pci 0000:0a:01.0: bridge window [mem 0xfffd500000-0xfffd5fffff 64bit pref]
[ 0.372222] pci 0000:0a:02.0: PCI bridge to [bus 0c]
[ 0.372226] pci 0000:0a:02.0: bridge window [mem 0xfcb00000-0xfccfffff]
[ 0.372229] pci 0000:0a:02.0: bridge window [mem 0xfffd300000-0xfffd4fffff 64bit pref]
[ 0.372234] pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
[ 0.372237] pci 0000:09:00.0: bridge window [mem 0xfcb00000-0xfcdfffff]
[ 0.372240] pci 0000:09:00.0: bridge window [mem 0xfffd300000-0xfffd5fffff 64bit pref]
[ 0.372245] pci 0000:00:02.2: PCI bridge to [bus 09-0c]
[ 0.372248] pci 0000:00:02.2: bridge window [mem 0xfcb00000-0xfcefffff]
[ 0.372250] pci 0000:00:02.2: bridge window [mem 0xfffd300000-0xfffd5fffff 64bit pref]
[ 0.372255] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.372258] pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff]
[ 0.372263] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.372265] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.372267] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.372268] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.372270] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.372271] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfdffffff window]
[ 0.372273] pci_bus 0000:00: resource 10 [mem 0x840000000-0xffffffffff window]
[ 0.372275] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 0.372276] pci_bus 0000:01: resource 2 [mem 0xffec000000-0xfffd1fffff 64bit pref]
[ 0.372278] pci_bus 0000:02: resource 0 [io 0xd000-0xffff]
[ 0.372280] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfc5fffff]
[ 0.372281] pci_bus 0000:03: resource 0 [io 0xd000-0xffff]
[ 0.372283] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfc4fffff]
[ 0.372285] pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
[ 0.372286] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfc0fffff]
[ 0.372288] pci_bus 0000:05: resource 0 [io 0xf000-0xffff]
[ 0.372289] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfc0fffff]
[ 0.372291] pci_bus 0000:06: resource 1 [mem 0xfc400000-0xfc4fffff]
[ 0.372292] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.372294] pci_bus 0000:07: resource 1 [mem 0xfc300000-0xfc3fffff]
[ 0.372296] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
[ 0.372297] pci_bus 0000:08: resource 1 [mem 0xfc200000-0xfc2fffff]
[ 0.372299] pci_bus 0000:09: resource 1 [mem 0xfcb00000-0xfcefffff]
[ 0.372300] pci_bus 0000:09: resource 2 [mem 0xfffd300000-0xfffd5fffff 64bit pref]
[ 0.372302] pci_bus 0000:0a: resource 1 [mem 0xfcb00000-0xfcdfffff]
[ 0.372303] pci_bus 0000:0a: resource 2 [mem 0xfffd300000-0xfffd5fffff 64bit pref]
[ 0.372305] pci_bus 0000:0b: resource 1 [mem 0xfcd00000-0xfcdfffff]
[ 0.372306] pci_bus 0000:0b: resource 2 [mem 0xfffd500000-0xfffd5fffff 64bit pref]
[ 0.372308] pci_bus 0000:0c: resource 1 [mem 0xfcb00000-0xfccfffff]
[ 0.372310] pci_bus 0000:0c: resource 2 [mem 0xfffd300000-0xfffd4fffff 64bit pref]
[ 0.372311] pci_bus 0000:0d: resource 1 [mem 0xfc700000-0xfcafffff]
[ 0.372560] pci 0000:0d:00.3: extending delay after power-on from D3hot to 20 msec
[ 0.372656] pci 0000:0d:00.4: extending delay after power-on from D3hot to 20 msec
[ 0.372721] PCI: CLS 64 bytes, default 64
[ 0.372741] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.372777] Trying to unpack rootfs image as initramfs...
[ 0.372831] pci 0000:00:01.0: Adding to iommu group 0
[ 0.372851] pci 0000:00:01.1: Adding to iommu group 1
[ 0.372891] pci 0000:00:02.0: Adding to iommu group 2
[ 0.372908] pci 0000:00:02.1: Adding to iommu group 3
[ 0.372926] pci 0000:00:02.2: Adding to iommu group 4
[ 0.372958] pci 0000:00:08.0: Adding to iommu group 5
[ 0.372975] pci 0000:00:08.1: Adding to iommu group 6
[ 0.373006] pci 0000:00:14.0: Adding to iommu group 7
[ 0.373022] pci 0000:00:14.3: Adding to iommu group 7
[ 0.373097] pci 0000:00:18.0: Adding to iommu group 8
[ 0.373112] pci 0000:00:18.1: Adding to iommu group 8
[ 0.373127] pci 0000:00:18.2: Adding to iommu group 8
[ 0.373142] pci 0000:00:18.3: Adding to iommu group 8
[ 0.373157] pci 0000:00:18.4: Adding to iommu group 8
[ 0.373173] pci 0000:00:18.5: Adding to iommu group 8
[ 0.373188] pci 0000:00:18.6: Adding to iommu group 8
[ 0.373203] pci 0000:00:18.7: Adding to iommu group 8
[ 0.373238] pci 0000:01:00.0: Adding to iommu group 9
[ 0.373255] pci 0000:01:00.1: Adding to iommu group 9
[ 0.373293] pci 0000:02:00.0: Adding to iommu group 10
[ 0.373310] pci 0000:02:00.1: Adding to iommu group 10
[ 0.373328] pci 0000:02:00.2: Adding to iommu group 10
[ 0.373334] pci 0000:03:06.0: Adding to iommu group 10
[ 0.373340] pci 0000:03:07.0: Adding to iommu group 10
[ 0.373346] pci 0000:03:08.0: Adding to iommu group 10
[ 0.373352] pci 0000:03:09.0: Adding to iommu group 10
[ 0.373358] pci 0000:04:00.0: Adding to iommu group 10
[ 0.373374] pci 0000:05:00.0: Adding to iommu group 10
[ 0.373381] pci 0000:06:00.0: Adding to iommu group 10
[ 0.373388] pci 0000:07:00.0: Adding to iommu group 10
[ 0.373394] pci 0000:08:00.0: Adding to iommu group 10
[ 0.373411] pci 0000:09:00.0: Adding to iommu group 11
[ 0.373429] pci 0000:0a:01.0: Adding to iommu group 12
[ 0.373448] pci 0000:0a:02.0: Adding to iommu group 13
[ 0.373480] pci 0000:0b:00.0: Adding to iommu group 14
[ 0.373501] pci 0000:0b:00.1: Adding to iommu group 14
[ 0.373519] pci 0000:0c:00.0: Adding to iommu group 15
[ 0.373538] pci 0000:0c:00.1: Adding to iommu group 16
[ 0.373570] pci 0000:0c:00.2: Adding to iommu group 17
[ 0.373592] pci 0000:0c:00.3: Adding to iommu group 17
[ 0.373626] pci 0000:0d:00.0: Adding to iommu group 18
[ 0.373645] pci 0000:0d:00.2: Adding to iommu group 19
[ 0.373664] pci 0000:0d:00.3: Adding to iommu group 20
[ 0.373683] pci 0000:0d:00.4: Adding to iommu group 21
[ 0.373702] pci 0000:0d:00.5: Adding to iommu group 22
[ 0.373722] pci 0000:0d:00.6: Adding to iommu group 23
[ 0.375760] AMD-Vi: Extended features (0x206d73ef22254ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC
[ 0.375768] AMD-Vi: Interrupt remapping enabled
[ 0.375769] AMD-Vi: X2APIC enabled
[ 0.387282] AMD-Vi: Virtual APIC enabled
[ 0.387289] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.387292] software IO TLB: mapped [mem 0x00000000a9a56000-0x00000000ada56000] (64MB)
[ 0.387342] LVT offset 0 assigned for vector 0x400
[ 0.387571] perf: AMD IBS detected (0x000003ff)
[ 0.387576] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.388258] Initialise system trusted keyrings
[ 0.388299] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 0.396585] Key type asymmetric registered
[ 0.396587] Asymmetric key parser 'x509' registered
[ 0.396607] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.396643] io scheduler mq-deadline registered
[ 0.396644] io scheduler kyber registered
[ 0.396653] io scheduler bfq registered
[ 0.397716] pcieport 0000:00:01.1: PME: Signaling with IRQ 28
[ 0.397867] pcieport 0000:00:02.1: PME: Signaling with IRQ 29
[ 0.398003] pcieport 0000:00:02.2: PME: Signaling with IRQ 30
[ 0.398149] pcieport 0000:00:08.1: PME: Signaling with IRQ 31
[ 0.398289] pcieport 0000:00:02.1: can't derive routing for PCI INT C
[ 0.398292] pcieport 0000:02:00.2: PCI INT C: not connected
[ 0.398357] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 0.398358] pcieport 0000:03:06.0: PCI INT A: not connected
[ 0.398508] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 0.398510] pcieport 0000:03:07.0: PCI INT A: not connected
[ 0.398818] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 0.398820] pcieport 0000:03:09.0: PCI INT A: not connected
[ 0.400189] Monitor-Mwait will be used to enter C-1 state
[ 0.401735] Estimated ratio of average max frequency by base frequency (times 1024): 1176
[ 0.401750] ERST DBG: ERST support is disabled.
[ 0.401849] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.402059] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.403737] ACPI: bus type drm_connector registered
[ 0.403776] ast 0000:05:00.0: vgaarb: deactivate vga console
[ 0.403806] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 0.403808] pci 0000:04:00.0: PCI INT A: not connected
[ 0.403833] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 0.403835] ast 0000:05:00.0: PCI INT A: not connected
[ 0.403857] ast 0000:05:00.0: Using P2A bridge for configuration
[ 0.403858] ast 0000:05:00.0: AST 2500 detected
[ 0.403887] ast 0000:05:00.0: [drm] Using analog VGA
[ 0.404017] [drm] Initialized ast 0.1.0 for 0000:05:00.0 on minor 0
[ 0.408076] fbcon: astdrmfb (fb0) is primary device
[ 0.408080] fbcon: Deferring console take-over
[ 0.408082] ast 0000:05:00.0: [drm] fb0: astdrmfb frame buffer device
[ 0.426753] brd: module loaded
[ 0.426883] i8042: PNP: No PS/2 controller found.
[ 0.426884] i8042: Probing ports directly.
[ 0.427730] i8042: No controller found
[ 0.427761] rtc_cmos 00:02: RTC can wake from S4
[ 0.428020] rtc_cmos 00:02: registered as rtc0
[ 0.428051] rtc_cmos 00:02: setting system clock to 2026-04-24T22:37:28 UTC (1777070248)
[ 0.428080] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[ 0.429195] NET: Registered PF_INET6 protocol family
[ 0.429376] Segment Routing with IPv6
[ 0.429384] In-situ OAM (IOAM) with IPv6
[ 0.429398] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.429641] Key type dns_resolver registered
[ 0.431756] x86/amd: Previous system reset reason [0x00080800]: software wrote 0x6 to reset control register 0xCF9
[ 0.431766] microcode: Current revision: 0x0a50000f
[ 0.433113] resctrl: L3 allocation detected
[ 0.433114] resctrl: MB allocation detected
[ 0.433115] resctrl: L3 monitoring detected
[ 0.433132] IPI shorthand broadcast: enabled
[ 0.435259] sched_clock: Marking stable (434848666, 229426)->(448508307, -13430215)
[ 0.435562] registered taskstats version 1
[ 0.435825] Loading compiled-in X.509 certificates
[ 0.447707] Freeing initrd memory: 18508K
[ 0.450632] Loaded X.509 cert 'alpinelinux.org: Build time autogenerated kernel key: d7155500c185eadf269f9cc06936306c9cd86538'
[ 0.453164] Demotion targets for Node 0: null
[ 0.453211] Key type .fscrypt registered
[ 0.453213] Key type fscrypt-provisioning registered
[ 0.453516] RAS: Correctable Errors collector initialized.
[ 0.456238] clk: Disabling unused clocks
[ 0.456240] PM: genpd: Disabling unused power domains
[ 0.457461] Freeing unused kernel image (initmem) memory: 3068K
[ 0.457477] Write protecting the kernel read-only data: 28672k
[ 0.457729] Freeing unused kernel image (text/rodata gap) memory: 496K
[ 0.458002] Freeing unused kernel image (rodata/data gap) memory: 1520K
[ 0.458008] Run /init as init process
[ 0.458009] with arguments:
[ 0.458011] /init
[ 0.458012] with environment:
[ 0.458013] HOME=/
[ 0.458014] TERM=linux
[ 0.458015] modules=sd-mod,usb-storage,ext4
[ 0.463298] Alpine Init 3.13.0-r0
[ 0.463718] Loading boot drivers...
[ 0.472129] SCSI subsystem initialized
[ 0.483159] ACPI: bus type USB registered
[ 0.483183] usbcore: registered new interface driver usbfs
[ 0.483193] usbcore: registered new interface driver hub
[ 0.483204] usbcore: registered new device driver usb
[ 0.485123] usbcore: registered new interface driver usb-storage
[ 0.519754] loop: module loaded
[ 0.519978] Loading boot drivers: ok.
[ 0.520822] Mounting root...
[ 0.571128] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.571136] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.626884] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[ 0.627197] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.627200] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.627203] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.627263] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.627266] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.627268] usb usb1: Product: xHCI Host Controller
[ 0.627269] usb usb1: Manufacturer: Linux 6.18.19-0-lts-tschicke xhci-hcd
[ 0.627271] usb usb1: SerialNumber: 0000:02:00.0
[ 0.627411] hub 1-0:1.0: USB hub found
[ 0.627425] hub 1-0:1.0: 10 ports detected
[ 0.627782] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.627804] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 0.627806] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.627807] usb usb2: Product: xHCI Host Controller
[ 0.627809] usb usb2: Manufacturer: Linux 6.18.19-0-lts-tschicke xhci-hcd
[ 0.627810] usb usb2: SerialNumber: 0000:02:00.0
[ 0.627904] hub 2-0:1.0: USB hub found
[ 0.627915] hub 2-0:1.0: 4 ports detected
[ 0.628156] xhci_hcd 0000:0d:00.3: xHCI Host Controller
[ 0.628160] xhci_hcd 0000:0d:00.3: new USB bus registered, assigned bus number 3
[ 0.628253] xhci_hcd 0000:0d:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000010
[ 0.628515] xhci_hcd 0000:0d:00.3: xHCI Host Controller
[ 0.628520] xhci_hcd 0000:0d:00.3: new USB bus registered, assigned bus number 4
[ 0.628522] xhci_hcd 0000:0d:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.628553] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.628555] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.628556] usb usb3: Product: xHCI Host Controller
[ 0.628558] usb usb3: Manufacturer: Linux 6.18.19-0-lts-tschicke xhci-hcd
[ 0.628559] usb usb3: SerialNumber: 0000:0d:00.3
[ 0.628657] hub 3-0:1.0: USB hub found
[ 0.628665] hub 3-0:1.0: 4 ports detected
[ 0.628853] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.628874] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 0.628876] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.628877] usb usb4: Product: xHCI Host Controller
[ 0.628878] usb usb4: Manufacturer: Linux 6.18.19-0-lts-tschicke xhci-hcd
[ 0.628880] usb usb4: SerialNumber: 0000:0d:00.3
[ 0.628970] hub 4-0:1.0: USB hub found
[ 0.628976] hub 4-0:1.0: 2 ports detected
[ 0.629143] xhci_hcd 0000:0d:00.4: xHCI Host Controller
[ 0.629147] xhci_hcd 0000:0d:00.4: new USB bus registered, assigned bus number 5
[ 0.629235] xhci_hcd 0000:0d:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000010
[ 0.629488] xhci_hcd 0000:0d:00.4: xHCI Host Controller
[ 0.629491] xhci_hcd 0000:0d:00.4: new USB bus registered, assigned bus number 6
[ 0.629493] xhci_hcd 0000:0d:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.629525] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.629527] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.629529] usb usb5: Product: xHCI Host Controller
[ 0.629530] usb usb5: Manufacturer: Linux 6.18.19-0-lts-tschicke xhci-hcd
[ 0.629531] usb usb5: SerialNumber: 0000:0d:00.4
[ 0.629628] hub 5-0:1.0: USB hub found
[ 0.629636] hub 5-0:1.0: 4 ports detected
[ 0.629818] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.629840] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 0.629842] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.629843] usb usb6: Product: xHCI Host Controller
[ 0.629844] usb usb6: Manufacturer: Linux 6.18.19-0-lts-tschicke xhci-hcd
[ 0.629846] usb usb6: SerialNumber: 0000:0d:00.4
[ 0.629936] hub 6-0:1.0: USB hub found
[ 0.629942] hub 6-0:1.0: 2 ports detected
[ 0.677799] Emulex LightPulse Fibre Channel SCSI driver 14.4.0.11
[ 0.677802] Copyright (C) 2017-2025 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries.
[ 0.752405] lpfc 0000:0b:00.0: 0:6101 Disabling NVME support: Not supported by firmware (0 0) x3
[ 0.752411] lpfc 0000:0b:00.0: 0:2574 IO channels: hdwQ 12 IRQ 12 MRQ: 0
[ 0.758807] scsi host0: Emulex LPe16000 16Gb PCIe Obsolete, Unsupported Fibre Channel Adapter on PCI bus 0b device 00 irq 38 BSG PCI resettable
[ 0.832344] lpfc 0000:0b:00.0: 0:6468 Set host date / time: Status x10:
[ 0.940124] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 1.194887] lpfc 0000:0b:00.0: 0:3176 Port Name 0 Physical Link is functional
[ 1.270934] lpfc 0000:0b:00.1: 1:6101 Disabling NVME support: Not supported by firmware (0 0) x3
[ 1.270945] lpfc 0000:0b:00.1: 1:2574 IO channels: hdwQ 12 IRQ 12 MRQ: 0
[ 1.277733] scsi host1: Emulex LPe16000 16Gb PCIe Obsolete, Unsupported Fibre Channel Adapter on PCI bus 0b device 01 irq 40 BSG PCI resettable
[ 1.349551] lpfc 0000:0b:00.1: 1:6468 Set host date / time: Status x10:
[ 1.455452] tsc: Refined TSC clocksource calibration: 3593.231 MHz
[ 1.455460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb592eeae, max_idle_ns: 440795368405 ns
[ 1.459560] clocksource: Switched to clocksource tsc
[ 1.726598] lpfc 0000:0b:00.1: 1:3176 Port Name 1 Physical Link is functional
[ 1.729587] nvme nvme0: pci function 0000:06:00.0
[ 1.729650] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 1.729652] nvme 0000:06:00.0: PCI INT A: not connected
[ 1.743204] nvme nvme0: D3 entry latency set to 8 seconds
[ 1.768952] nvme nvme0: allocated 64 MiB host memory buffer (1 segment).
[ 1.868429] nvme nvme0: 12/0/0 default/read/poll queues
[ 1.885286] nvme0n1: p1 p2 p3
[ 1.893779] libata version 3.00 loaded.
[ 1.896698] pcieport 0000:00:02.1: can't derive routing for PCI INT B
[ 1.896701] ahci 0000:02:00.1: PCI INT B: not connected
[ 1.896800] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[ 1.896844] ahci 0000:02:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 1.896847] ahci 0000:02:00.1: 6/6 ports implemented (port mask 0x3f)
[ 1.896848] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 1.897417] scsi host2: ahci
[ 1.897538] scsi host3: ahci
[ 1.897665] scsi host4: ahci
[ 1.897779] scsi host5: ahci
[ 1.897878] scsi host6: ahci
[ 1.897974] scsi host7: ahci
[ 1.898027] ata1: SATA max UDMA/133 abar m131072@0xfc580000 port 0xfc580100 irq 105 lpm-pol 1 ext
[ 1.898030] ata2: SATA max UDMA/133 abar m131072@0xfc580000 port 0xfc580180 irq 105 lpm-pol 1 ext
[ 1.898032] ata3: SATA max UDMA/133 abar m131072@0xfc580000 port 0xfc580200 irq 105 lpm-pol 1 ext
[ 1.898034] ata4: SATA max UDMA/133 abar m131072@0xfc580000 port 0xfc580280 irq 105 lpm-pol 1 ext
[ 1.898036] ata5: SATA max UDMA/133 abar m131072@0xfc580000 port 0xfc580300 irq 105 lpm-pol 1 ext
[ 1.898038] ata6: SATA max UDMA/133 abar m131072@0xfc580000 port 0xfc580380 irq 105 lpm-pol 1 ext
[ 2.205500] ata1: SATA link down (SStatus 0 SControl 330)
[ 2.520697] ata2: SATA link down (SStatus 0 SControl 330)
[ 2.845403] ata3: SATA link down (SStatus 0 SControl 330)
[ 3.165490] ata4: SATA link down (SStatus 0 SControl 330)
[ 3.408078] usb 1-3: New USB device found, idVendor=0781, idProduct=55a3, bcdDevice= 1.00
[ 3.408088] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.408091] usb 1-3: Product: SanDisk 3.2Gen1
[ 3.408094] usb 1-3: Manufacturer: USB
[ 3.408096] usb 1-3: SerialNumber: 00010514032424010746
[ 3.484523] ata5: SATA link down (SStatus 0 SControl 330)
[ 3.805411] ata6: SATA link down (SStatus 0 SControl 330)
[ 3.843600] scsi host8: uas
[ 3.843706] usbcore: registered new interface driver uas
[ 3.844454] scsi 8:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 7
[ 3.847667] sd 8:0:0:0: [sda] 240328704 512-byte logical blocks: (123 GB/115 GiB)
[ 3.847840] sd 8:0:0:0: [sda] Write Protect is off
[ 3.847842] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 3.848178] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.848268] sd 8:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 3.863414] device-mapper: uevent: version 1.0.3
[ 3.863473] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[ 3.878958] sda: sda1 sda2
[ 3.879058] sd 8:0:0:0: [sda] Attached SCSI removable disk
[ 4.801147] EXT4-fs (dm-4): orphan cleanup on readonly fs
[ 4.801422] EXT4-fs (dm-4): mounted filesystem d8a01fd0-9ba0-4a40-8bac-58f3e25bf2cd ro with ordered data mode. Quota mode: disabled.
[ 4.801504] Mounting root: ok.
[ 4.824935] fbcon: Taking over console
[ 4.834125] Console: switching to colour frame buffer device 64x24
[ 5.212879] IPMI message handler: version 39.2
[ 5.214147] ipmi device interface
[ 5.216325] ipmi_si: IPMI System Interface driver
[ 5.216339] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[ 5.216342] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 5.216344] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 5.216385] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
[ 5.216488] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 5.216571] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
[ 5.216572] ipmi_si: Adding ACPI-specified kcs state machine
[ 5.216623] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[ 5.364343] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x003c0a, prod_id: 0x100f, dev_id: 0x20)
[ 5.448567] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 5.450561] ipmi_ssif: IPMI SSIF Interface driver
[ 5.451751] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 5.451784] ACPI: button: Power Button [PWRB]
[ 5.451853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.456259] ACPI: button: Power Button [PWRF]
[ 5.461349] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.461615] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:00/input/input2
[ 5.465620] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 5.465622] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 5.465624] RAPL PMU: hw unit of domain core 2^-16 Joules
[ 5.518106] ccp 0000:0d:00.2: enabling device (0000 -> 0002)
[ 5.518270] ccp 0000:0d:00.2: ccp: unable to access the device: you might be running a broken BIOS.
[ 5.519411] ccp 0000:0d:00.2: tee enabled
[ 5.519487] ccp 0000:0d:00.2: psp enabled
[ 5.525941] kvm_amd: TSC scaling supported
[ 5.525942] kvm_amd: Nested Virtualization enabled
[ 5.525944] kvm_amd: Nested Paging enabled
[ 5.525945] kvm_amd: LBR virtualization supported
[ 5.525948] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 5.525949] kvm_amd: Virtual GIF supported
[ 5.535373] amd_atl: AMD Address Translation Library initialized
[ 5.535775] intel_rapl_common: Found RAPL domain package
[ 5.535778] intel_rapl_common: Found RAPL domain core
[ 5.577028] EDAC MC: Ver: 3.0.0
[ 5.578129] MCE: In-kernel MCE decoding enabled.
[ 5.628979] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.628982] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 5.631253] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 5.632271] i2c i2c-3: Successfully instantiated SPD at 0x51
[ 5.633653] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 5.633724] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 5.633808] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 5.789455] be2net 0000:0c:00.0: FW config: function_mode=0x10802, function_caps=0x7
[ 5.805454] be2net 0000:0c:00.0: Using profile 0x12
[ 5.813459] be2net 0000:0c:00.0: Max: txqs 34, rxqs 64, rss 64, eqs 32, vfs 0
[ 5.813466] be2net 0000:0c:00.0: Max: uc-macs 126, mc-macs 64, vlans 64
[ 5.813646] be2net 0000:0c:00.0: enabled 3 MSI-x vector(s) for NIC
[ 5.863605] be2net 0000:0c:00.0: created 3 TX queue(s)
[ 5.875545] be2net 0000:0c:00.0: created 3 RX queue(s)
[ 5.886722] be2net 0000:0c:00.0: FW version is 11.1.238.1
[ 5.982156] be2net 0000:0c:00.0: HW Flow control - TX:1 RX:1
[ 5.986014] be2net 0000:0c:00.0: Emulex OneConnect(Skyhawk): PF port 2
[ 5.998868] be2net 0000:0c:00.0 eth0: Link is Up
[ 6.000294] be2net 0000:0c:00.0 elxeth0: renamed from eth0
[ 6.115456] be2net 0000:0c:00.1: FW config: function_mode=0x10802, function_caps=0x7
[ 6.131453] be2net 0000:0c:00.1: Using profile 0x12
[ 6.139457] be2net 0000:0c:00.1: Max: txqs 34, rxqs 64, rss 64, eqs 32, vfs 0
[ 6.139464] be2net 0000:0c:00.1: Max: uc-macs 126, mc-macs 64, vlans 64
[ 6.139633] be2net 0000:0c:00.1: enabled 3 MSI-x vector(s) for NIC
[ 6.191458] be2net 0000:0c:00.1: created 3 TX queue(s)
[ 6.203454] be2net 0000:0c:00.1: created 3 RX queue(s)
[ 6.214091] be2net 0000:0c:00.1: FW version is 11.1.238.1
[ 6.307110] be2net 0000:0c:00.1: HW Flow control - TX:1 RX:1
[ 6.311026] be2net 0000:0c:00.1: Emulex OneConnect(Skyhawk): PF port 3
[ 6.314746] be2net 0000:0c:00.1 eth0: Link is Up
[ 6.316167] be2net 0000:0c:00.1 elxeth1: renamed from eth0
[ 6.320782] dca service started, version 1.12.1
[ 6.327476] igb: Intel(R) Gigabit Ethernet Network Driver
[ 6.327478] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 6.357138] igb 0000:07:00.0 eth2: renamed from eth0
[ 6.358123] igb 0000:07:00.0: added PHC on eth2
[ 6.358154] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 6.358156] igb 0000:07:00.0: eth2: (PCIe:2.5Gb/s:Width x1) d8:5e:d3:6f:e1:7d
[ 6.358218] igb 0000:07:00.0: eth2: PBA No: 000500-000
[ 6.358220] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 6.358419] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 6.358422] igb 0000:08:00.0: PCI INT A: not connected
[ 6.387992] igb 0000:08:00.0 eth3: renamed from eth0
[ 6.388320] igb 0000:08:00.0: added PHC on eth3
[ 6.388351] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 6.388353] igb 0000:08:00.0: eth3: (PCIe:2.5Gb/s:Width x1) d8:5e:d3:6f:e1:7e
[ 6.388415] igb 0000:08:00.0: eth3: PBA No: 000500-000
[ 6.388417] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 6.441598] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.706467] udevd[2854]: starting version 3.2.14
[ 6.715539] udevd[2854]: starting eudev-3.2.14
[ 6.750001] EXT4-fs (dm-4): re-mounted d8a01fd0-9ba0-4a40-8bac-58f3e25bf2cd r/w.
[ 6.753944] EXT4-fs (dm-4): re-mounted d8a01fd0-9ba0-4a40-8bac-58f3e25bf2cd.
[ 6.843423] FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 7.180256] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[ 7.189869] XFS (dm-0): Mounting V5 Filesystem 31bee40c-84a8-406a-9d5c-4cd1e7fec067
[ 7.200789] XFS (dm-0): Ending clean mount
[ 7.202803] XFS (dm-1): Mounting V5 Filesystem f1ca1d2a-5c79-4009-b11e-3f3def629b20
[ 7.217167] XFS (dm-1): Ending clean mount
[ 7.273009] NET: Registered PF_PACKET protocol family
[ 7.278693] nvme nvme0: using unchecked data buffer
[ 7.288104] Loading iSCSI transport class v2.0-870.
[ 7.296479] iscsi: registered transport (be2iscsi)
[ 7.296482] In beiscsi_module_init, tt=000000006f32335a
[ 8.123223] be2net 0000:0c:00.0 elxeth0: Link is Up
[ 10.181057] be2net 0000:0c:00.1 elxeth1: Link is Up
[ 11.430976] bonding: bond1 is being created...
[ 11.486244] bond1: (slave eth2): Enslaving as an active interface with a down link
[ 11.565828] bond1: (slave eth3): Enslaving as an active interface with a down link
[ 11.596979] be2net 0000:0c:00.0: MAC address changed to d8:5e:d3:6f:e1:7d
[ 11.605044] be2net 0000:0c:00.0 elxeth0: Link is Up
[ 11.609307] be2net 0000:0c:00.0: MAC address changed to 00:10:9b:b0:14:9b
[ 11.609351] bond1: (slave elxeth0): making interface the new active one
[ 11.611184] be2net 0000:0c:00.0: MAC address changed to d8:5e:d3:6f:e1:7d
[ 11.611199] bond1: (slave elxeth0): Enslaving as an active interface with an up link
[ 11.641925] be2net 0000:0c:00.1: MAC address changed to d8:5e:d3:6f:e1:7d
[ 11.649984] be2net 0000:0c:00.1 elxeth1: Link is Up
[ 11.654341] be2net 0000:0c:00.1: MAC address changed to 00:10:9b:b0:14:9d
[ 11.654395] bond1: (slave elxeth1): Enslaving as an active interface with an up link
[ 21.187713] RPC: Registered named UNIX socket transport module.
[ 21.187715] RPC: Registered udp transport module.
[ 21.187717] RPC: Registered tcp transport module.
[ 21.187718] RPC: Registered tcp-with-tls transport module.
[ 21.187719] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 22.513050] NFSD: Using UMH upcall client tracking operations.
[ 22.513849] NFSD: Using UMH upcall client tracking operations.
[ 22.513852] NFSD: starting 90-second grace period (net effffff9)
[ 135.247647] LiquidIO 0000:01:00.0: Initializing device 177d:9702.
[ 135.247755] LiquidIO 0000:01:00.0: trs:64 max_vfs:52 rings_per_vf:1 pf_srn:52 num_pf_rings:12
[ 146.470591] LiquidIO 0000:01:00.0: Firmware version: 1.7.2
[ 146.470595] LiquidIO 0000:01:00.0: octeon_download_firmware: Loading 1 images
[ 146.470598] LiquidIO 0000:01:00.0: Loading firmware 1285952 at 21000000
[ 146.493182] LiquidIO 0000:01:00.0: Writing boot command: bootoct 0x21000000 numcores=$(numcores) time_sec=1777070395 time_nsec=255124714
[ 146.504785] LiquidIO 0000:01:00.1: Initializing device 177d:9702.
[ 146.504947] LiquidIO 0000:01:00.1: trs:64 max_vfs:52 rings_per_vf:1 pf_srn:52 num_pf_rings:12
[ 149.395217] LiquidIO 0000:01:00.1: Running NIC (1500000000 Hz)
[ 149.395244] LiquidIO 0000:01:00.0: Running NIC (1500000000 Hz)
[ 150.005065] LiquidIO 0000:01:00.1: eth%d VLAN filter enabled
[ 150.017064] LiquidIO 0000:01:00.1 eth0: RX Checksum Offload Enabled
[ 150.028065] LiquidIO 0000:01:00.1 eth0: TX Checksum Offload Enabled
[ 150.081089] LiquidIO 0000:01:00.0: eth%d VLAN filter enabled
[ 150.093064] LiquidIO 0000:01:00.0 eth1: RX Checksum Offload Enabled
[ 150.103072] LiquidIO 0000:01:00.0 eth1: TX Checksum Offload Enabled
[ 211.083367] LiquidIO 0000:01:00.1: lio_set_link_ksettings: Changing speed is not supported
tschike:~# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:0F:B7:C9:13:3D
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
tschike:~# ifup eth^C
tschike:~# ip link set eth0 up
tschike:~# ip link set eth1 up
tschike:~# dmesg
[ 0.000000] Linux version 6.18.19-0-lts-tschicke (floh@tschike) (cc (Alpine 15.2.0) 15.2.0, GNU ld (GNU Binutils) 2.45.1) #1-Alpine SMP PREEMPT_DYNAMIC 2026-03-31 06:39:22
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-lts-tschicke root=/dev/mapper/vg0--tschicke-lv_root ro modules=sd-mod,usb-storage,ext4 quiet rootfstype=ext4 amd_pstate=guided vsyscall=emulate
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009bfefff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009bff000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20d000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000b7b3afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7b3b000-0x00000000ba66ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba670000-0x00000000ba6b6fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ba6b7000-0x00000000bbd6dfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bbd6e000-0x00000000bcdfefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bcdff000-0x00000000bdffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd6fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083e2fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000083e300000-0x000000083fffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] APIC: Static calls initialized
[ 0.000000] efi: EFI v2.7 by American Megatrends
[ 0.000000] efi: ACPI=0xbbd57000 ACPI 2.0=0xbbd57014 SMBIOS=0xbcc05000 SMBIOS 3.0=0xbcc04000 MEMATTR=0xb335d698 ESRT=0xb6ecb918 INITRD=0xb3350518 RNG=0xba68b018
[ 0.000000] random: crng init done
[ 0.000000] efi: Remove mem310: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
[ 0.000000] e820: remove [mem 0xf0000000-0xf7ffffff] reserved
[ 0.000000] efi: Remove mem311: MMIO range=[0xfd200000-0xfd2fffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd200000-0xfd2fffff] reserved
[ 0.000000] efi: Remove mem312: MMIO range=[0xfd600000-0xfd6fffff] (1MB) from e820 map
[ 0.000000] e820: remove [mem 0xfd600000-0xfd6fffff] reserved
[ 0.000000] efi: Not removing mem313: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
[ 0.000000] efi: Remove mem314: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
[ 0.000000] e820: remove [mem 0xfeb80000-0xfec01fff] reserved
[ 0.000000] efi: Not removing mem315: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem316: MMIO range=[0xfec30000-0xfec30fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem317: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[ 0.000000] efi: Not removing mem318: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
[ 0.000000] efi: Not removing mem319: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[ 0.000000] efi: Not removing mem320: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
[ 0.000000] efi: Not removing mem321: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
[ 0.000000] efi: Remove mem322: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
[ 0.000000] e820: remove [mem 0xff000000-0xffffffff] reserved
[ 0.000000] SMBIOS 3.3.0 present.
[ 0.000000] DMI: GIGABYTE MC12-LE0-00/MC12-LE0-00, BIOS F14 03/01/2024
[ 0.000000] DMI: Memory slots populated: 1/4
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3593.212 MHz processor
[ 0.000131] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000132] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000138] last_pfn = 0x83e300 max_arch_pfn = 0x400000000
[ 0.000143] MTRR map: 6 entries (4 fixed + 2 variable; max 21), built from 9 variable MTRRs
[ 0.000144] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000264] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000269] last_pfn = 0xbe000 max_arch_pfn = 0x400000000
[ 0.002836] esrt: Reserving ESRT space from 0x00000000b6ecb918 to 0x00000000b6ecb9a0.
[ 0.002845] e820: update [mem 0xb6ecb000-0xb6ecbfff] usable ==> reserved
[ 0.002871] Using GB pages for direct mapping
[ 0.003241] Secure boot disabled
[ 0.003242] RAMDISK: [mem 0xae5e6000-0xaf7f8fff]
[ 0.003245] ACPI: Early table checksum verification disabled
[ 0.003247] ACPI: RSDP 0x00000000BBD57014 000024 (v02 GBT )
[ 0.003250] ACPI: XSDT 0x00000000BBD56728 0000C4 (v01 GBT GBTUACPI 01072009 AMI 01000013)
[ 0.003253] ACPI: FACP 0x00000000BA6A7000 000114 (v06 GBT GBTUACPI 01072009 AMI 00010013)
[ 0.003256] ACPI: DSDT 0x00000000BA6A1000 005B79 (v02 GBT GBTUACPI 01072009 INTL 20120913)
[ 0.003258] ACPI: FACS 0x00000000BAD51000 000040
[ 0.003259] ACPI: IVRS 0x00000000BA6B6000 0000D0 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003260] ACPI: SPMI 0x00000000BA6B5000 000041 (v05 GBT GBTUACPI 00000000 AMI. 00000000)
[ 0.003262] ACPI: SSDT 0x00000000BA6AD000 0072B0 (v02 AMD Artic 00000002 MSFT 04000000)
[ 0.003263] ACPI: SSDT 0x00000000BA6A9000 003B8E (v02 AMD AMD AOD 00000001 INTL 20120913)
[ 0.003264] ACPI: SSDT 0x00000000BA6A8000 0001AD (v02 GBT CPUSSDT 01072009 AMI 01072009)
[ 0.003266] ACPI: FIDT 0x00000000BA6A0000 00009C (v01 GBT GBTUACPI 01072009 AMI 00010013)
[ 0.003267] ACPI: MCFG 0x00000000BA69F000 00003C (v01 GBT GBTUACPI 01072009 MSFT 00010013)
[ 0.003268] ACPI: HPET 0x00000000BA69E000 000038 (v01 GBT GBTUACPI 01072009 AMI 00000005)
[ 0.003269] ACPI: FPDT 0x00000000BA69D000 000044 (v01 GBT A M I 01072009 AMI 01000013)
[ 0.003271] ACPI: BGRT 0x00000000BA69C000 000038 (v01 GBT GBTUACPI 01072009 AMI 00010013)
[ 0.003272] ACPI: SSDT 0x00000000BA698000 003E88 (v02 AMD AmdTable 00000001 AMD 00000001)
[ 0.003273] ACPI: CRAT 0x00000000BA697000 000B68 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003274] ACPI: CDIT 0x00000000BA696000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
[ 0.003276] ACPI: SSDT 0x00000000BA692000 0037DC (v02 AMD ArticN 00000001 INTL 20120913)
[ 0.003277] ACPI: WSMT 0x00000000BA691000 000028 (v01 GBT GBTUACPI 01072009 AMI 00010013)
[ 0.003278] ACPI: APIC 0x00000000BA690000 00015E (v04 GBT GBTUACPI 01072009 AMI 00010013)
[ 0.003279] ACPI: SSDT 0x00000000BA68F000 00049F (v02 AMD ArticPRN 00000001 INTL 20120913)
[ 0.003281] ACPI: SSDT 0x00000000BA68D000 0010AF (v02 AMD ArticC 00000001 INTL 20120913)
[ 0.003282] ACPI: SSDT 0x00000000BA68C000 0000BF (v01 AMD AmdTable 00001000 INTL 20120913)
[ 0.003283] ACPI: Reserving FACP table memory at [mem 0xba6a7000-0xba6a7113]
[ 0.003284] ACPI: Reserving DSDT table memory at [mem 0xba6a1000-0xba6a6b78]
[ 0.003284] ACPI: Reserving FACS table memory at [mem 0xbad51000-0xbad5103f]
[ 0.003285] ACPI: Reserving IVRS table memory at [mem 0xba6b6000-0xba6b60cf]
[ 0.003285] ACPI: Reserving SPMI table memory at [mem 0xba6b5000-0xba6b5040]
[ 0.003285] ACPI: Reserving SSDT table memory at [mem 0xba6ad000-0xba6b42af]
[ 0.003286] ACPI: Reserving SSDT table memory at [mem 0xba6a9000-0xba6acb8d]
[ 0.003286] ACPI: Reserving SSDT table memory at [mem 0xba6a8000-0xba6a81ac]
[ 0.003286] ACPI: Reserving FIDT table memory at [mem 0xba6a0000-0xba6a009b]
[ 0.003287] ACPI: Reserving MCFG table memory at [mem 0xba69f000-0xba69f03b]
[ 0.003287] ACPI: Reserving HPET table memory at [mem 0xba69e000-0xba69e037]
[ 0.003288] ACPI: Reserving FPDT table memory at [mem 0xba69d000-0xba69d043]
[ 0.003288] ACPI: Reserving BGRT table memory at [mem 0xba69c000-0xba69c037]
[ 0.003288] ACPI: Reserving SSDT table memory at [mem 0xba698000-0xba69be87]
[ 0.003289] ACPI: Reserving CRAT table memory at [mem 0xba697000-0xba697b67]
[ 0.003289] ACPI: Reserving CDIT table memory at [mem 0xba696000-0xba696028]
[ 0.003290] ACPI: Reserving SSDT table memory at [mem 0xba692000-0xba6957db]
[ 0.003290] ACPI: Reserving WSMT table memory at [mem 0xba691000-0xba691027]
[ 0.003290] ACPI: Reserving APIC table memory at [mem 0xba690000-0xba69015d]
[ 0.003291] ACPI: Reserving SSDT table memory at [mem 0xba68f000-0xba68f49e]
[ 0.003291] ACPI: Reserving SSDT table memory at [mem 0xba68d000-0xba68e0ae]
[ 0.003291] ACPI: Reserving SSDT table memory at [mem 0xba68c000-0xba68c0be]
[ 0.003341] No NUMA configuration found
[ 0.003342] Faking a node at [mem 0x0000000000000000-0x000000083e2fffff]
[ 0.003344] NODE_DATA(0) allocated [mem 0x83e2fae40-0x83e2fffff]
[ 0.003374] Zone ranges:
[ 0.003374] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.003375] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.003376] Normal [mem 0x0000000100000000-0x000000083e2fffff]
[ 0.003377] Device empty
[ 0.003377] Movable zone start for each node
[ 0.003378] Early memory node ranges
[ 0.003378] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.003379] node 0: [mem 0x0000000000100000-0x0000000009bfefff]
[ 0.003379] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.003379] node 0: [mem 0x000000000a20d000-0x000000000affffff]
[ 0.003380] node 0: [mem 0x000000000b020000-0x00000000b7b3afff]
[ 0.003380] node 0: [mem 0x00000000bcdff000-0x00000000bdffffff]
[ 0.003381] node 0: [mem 0x0000000100000000-0x000000083e2fffff]
[ 0.003383] Initmem setup node 0 [mem 0x0000000000001000-0x000000083e2fffff]
[ 0.003386] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.003398] On node 0, zone DMA: 96 pages in unavailable ranges
[ 0.003495] On node 0, zone DMA32: 1025 pages in unavailable ranges
[ 0.003505] On node 0, zone DMA32: 13 pages in unavailable ranges
[ 0.006986] On node 0, zone DMA32: 32 pages in unavailable ranges
[ 0.007140] On node 0, zone DMA32: 21188 pages in unavailable ranges
[ 0.051226] On node 0, zone Normal: 8192 pages in unavailable ranges
[ 0.051274] On node 0, zone Normal: 7424 pages in unavailable ranges
[ 0.051938] ACPI: PM-Timer IO Port: 0x808
[ 0.051946] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.051957] IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
[ 0.051962] IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
[ 0.051963] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.051965] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.051967] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.051968] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.051981] e820: update [mem 0xb3d3f000-0xb3f7ffff] usable ==> reserved
[ 0.051993] CPU topo: Max. logical packages: 1
[ 0.051993] CPU topo: Max. logical dies: 1
[ 0.051994] CPU topo: Max. dies per package: 1
[ 0.051996] CPU topo: Max. threads per core: 2
[ 0.051997] CPU topo: Num. cores per package: 6
[ 0.051998] CPU topo: Num. threads per package: 12
[ 0.051998] CPU topo: Allowing 12 present CPUs plus 0 hotplug CPUs
[ 0.052018] [mem 0xc0000000-0xfe9fffff] available for PCI devices
[ 0.052020] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.054998] setup_percpu: NR_CPUS:256 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1
[ 0.055470] percpu: Embedded 55 pages/cpu s186584 r8192 d30504 u262144
[ 0.055474] pcpu-alloc: s186584 r8192 d30504 u262144 alloc=1*2097152
[ 0.055475] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- --
[ 0.055490] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-lts-tschicke root=/dev/mapper/vg0--tschicke-lv_root ro modules=sd-mod,usb-storage,ext4 quiet rootfstype=ext4 amd_pstate=guided vsyscall=emulate
[ 0.055533] Unknown kernel command line parameters "modules=sd-mod,usb-storage,ext4", will be passed to user space.
[ 0.055550] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.058538] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[ 0.060080] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.060176] software IO TLB: area num 16.
[ 0.072381] Fallback order for Node 0: 0
[ 0.072387] Built 1 zonelists, mobility grouping on. Total pages: 8350637
[ 0.072388] Policy zone: Normal
[ 0.072620] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.128816] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[ 0.128820] kmemleak: Kernel memory leak detector disabled
[ 0.136052] ftrace: allocating 44443 entries in 176 pages
[ 0.136053] ftrace: allocated 176 pages with 3 groups
[ 0.136606] Dynamic Preempt: voluntary
[ 0.136649] rcu: Preemptible hierarchical RCU implementation.
[ 0.136650] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
[ 0.136651] Trampoline variant of Tasks RCU enabled.
[ 0.136651] Rude variant of Tasks RCU enabled.
[ 0.136651] Tracing variant of Tasks RCU enabled.
[ 0.136652] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.136652] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[ 0.136660] RCU Tasks: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[ 0.136662] RCU Tasks Rude: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[ 0.136663] RCU Tasks Trace: Setting shift to 4 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=12.
[ 0.139356] NR_IRQS: 16640, nr_irqs: 1064, preallocated irqs: 16
[ 0.139537] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.139628] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[ 0.139655] Console: colour dummy device 80x25
[ 0.139657] printk: legacy console [tty0] enabled
[ 0.139684] ACPI: Core revision 20250807
[ 0.139768] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.139784] APIC: Switch to symmetric I/O mode setup
[ 0.140206] AMD-Vi: Using global IVHD EFR:0x206d73ef22254ade, EFR2:0x0
[ 0.140480] x2apic enabled
[ 0.140517] APIC: Switched APIC routing to: cluster x2apic
[ 0.141133] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.145792] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33cb46d84d1, max_idle_ns: 440795320623 ns
[ 0.145795] Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.42 BogoMIPS (lpj=3593212)
[ 0.145812] x86/cpu: User Mode Instruction Prevention (UMIP) activated
[ 0.145835] LVT offset 1 assigned for vector 0xf9
[ 0.145918] LVT offset 2 assigned for vector 0xf4
[ 0.145953] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
[ 0.145954] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
[ 0.145957] process: using mwait in idle threads
[ 0.145958] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto
[ 0.145961] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.145962] Transient Scheduler Attacks: Vulnerable: No microcode
[ 0.145963] Spectre V2 : Mitigation: Retpolines
[ 0.145963] Spectre V2 : User space: Mitigation: STIBP always-on protection
[ 0.145964] Speculative Return Stack Overflow: Mitigation: Safe RET
[ 0.145965] VMSCAPE: Mitigation: IBPB before exit to userspace
[ 0.145965] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.145966] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[ 0.145967] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.145968] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.145969] active return thunk: srso_alias_return_thunk
[ 0.145976] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.145977] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.145978] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.145978] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
[ 0.145979] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
[ 0.145979] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
[ 0.145981] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.145981] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
[ 0.145982] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
[ 0.145983] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24
[ 0.145983] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format.
[ 0.162000] Freeing SMP alternatives memory: 44K
[ 0.162003] pid_max: default: 32768 minimum: 301
[ 0.162041] LSM: initializing lsm=lockdown,capability,landlock,yama
[ 0.162115] landlock: Up and running.
[ 0.162116] Yama: becoming mindful.
[ 0.162169] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.162213] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.264636] smpboot: CPU0: AMD Ryzen 5 5600GT with Radeon Graphics (family: 0x19, model: 0x50, stepping: 0x0)
[ 0.264793] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.264793] ... version: 0
[ 0.264793] ... bit width: 48
[ 0.264793] ... generic counters: 6
[ 0.264793] ... generic bitmap: 000000000000003f
[ 0.264793] ... fixed-purpose counters: 0
[ 0.264793] ... fixed-purpose bitmap: 0000000000000000
[ 0.264793] ... value mask: 0000ffffffffffff
[ 0.264793] ... max period: 00007fffffffffff
[ 0.264793] ... global_ctrl mask: 000000000000003f
[ 0.264793] signal: max sigframe size: 3376
[ 0.264793] rcu: Hierarchical SRCU implementation.
[ 0.264793] rcu: Max phase no-delay instances is 400.
[ 0.264793] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
[ 0.267146] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.267260] smp: Bringing up secondary CPUs ...
[ 0.267385] smpboot: x86: Booting SMP configuration:
[ 0.267387] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
[ 0.275885] Spectre V2 : Update user space SMT mitigation: STIBP always-on
[ 0.281826] smp: Brought up 1 node, 12 CPUs
[ 0.281826] smpboot: Total of 12 processors activated (86237.08 BogoMIPS)
[ 0.282934] Memory: 32581936K/33402548K available (15884K kernel code, 2037K rwdata, 10768K rodata, 3068K init, 4816K bss, 802596K reserved, 0K cma-reserved)
[ 0.283359] devtmpfs: initialized
[ 0.283359] x86/mm: Memory block size: 128MB
[ 0.287203] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20cfff] (53248 bytes)
[ 0.287203] ACPI: PM: Registering ACPI NVS region [mem 0xba6b7000-0xbbd6dfff] (23818240 bytes)
[ 0.287277] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.287277] posixtimers hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.287277] futex hash table entries: 4096 (262144 bytes on 1 NUMA nodes, total 256 KiB, linear).
[ 0.287835] pinctrl core: initialized pinctrl subsystem
[ 0.288324] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.288470] audit: initializing netlink subsys (disabled)
[ 0.288476] audit: type=2000 audit(1777070248.148:1): state=initialized audit_enabled=0 res=1
[ 0.288476] thermal_sys: Registered thermal governor 'fair_share'
[ 0.288476] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.288476] thermal_sys: Registered thermal governor 'step_wise'
[ 0.288476] thermal_sys: Registered thermal governor 'user_space'
[ 0.288476] cpuidle: using governor ladder
[ 0.288476] cpuidle: using governor menu
[ 0.292444] efi: Freeing EFI boot services memory: 91452K
[ 0.292448] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.292538] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
[ 0.292549] PCI: Using configuration type 1 for base access
[ 0.292657] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.292883] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.292885] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.292887] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.292888] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.294286] ACPI: Added _OSI(Module Device)
[ 0.294288] ACPI: Added _OSI(Processor Device)
[ 0.294290] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.307419] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.309527] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.315281] ACPI: Interpreter enabled
[ 0.315290] ACPI: PM: (supports S0 S5)
[ 0.315292] ACPI: Using IOAPIC for interrupt routing
[ 0.315637] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.315638] PCI: Ignoring E820 reservations for host bridge windows
[ 0.316023] ACPI: Enabled 5 GPEs in block 00 to 1F
[ 0.327131] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.327136] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.327213] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR]
[ 0.327348] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.327358] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.327713] PCI host bridge to bus 0000:00
[ 0.327717] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.327719] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.327721] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.327722] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.327724] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[ 0.327726] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfdffffff window]
[ 0.327727] pci_bus 0000:00: root bus resource [mem 0x840000000-0xffffffffff window]
[ 0.327729] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.327742] pci 0000:00:00.0: [1022:1630] type 00 class 0x060000 conventional PCI endpoint
[ 0.327853] pci 0000:00:00.2: [1022:1631] type 00 class 0x080600 conventional PCI endpoint
[ 0.327962] pci 0000:00:01.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
[ 0.328028] pci 0000:00:01.1: [1022:1634] type 01 class 0x060400 PCIe Root Port
[ 0.328041] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.328046] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.328052] pci 0000:00:01.1: bridge window [mem 0xffec000000-0xfffd1fffff 64bit pref]
[ 0.328092] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.328201] pci 0000:00:02.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
[ 0.328268] pci 0000:00:02.1: [1022:1634] type 01 class 0x060400 PCIe Root Port
[ 0.328281] pci 0000:00:02.1: PCI bridge to [bus 02-08]
[ 0.328285] pci 0000:00:02.1: bridge window [io 0xd000-0xffff]
[ 0.328287] pci 0000:00:02.1: bridge window [mem 0xfa000000-0xfc5fffff]
[ 0.328298] pci 0000:00:02.1: enabling Extended Tags
[ 0.328331] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[ 0.328437] pci 0000:00:02.2: [1022:1633] type 01 class 0x060400 PCIe Root Port
[ 0.328449] pci 0000:00:02.2: PCI bridge to [bus 09-0c]
[ 0.328454] pci 0000:00:02.2: bridge window [mem 0xfcb00000-0xfcefffff]
[ 0.328460] pci 0000:00:02.2: bridge window [mem 0xfffd300000-0xfffd5fffff 64bit pref]
[ 0.328466] pci 0000:00:02.2: enabling Extended Tags
[ 0.328499] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.328598] pci 0000:00:08.0: [1022:1632] type 00 class 0x060000 conventional PCI endpoint
[ 0.328663] pci 0000:00:08.1: [1022:1635] type 01 class 0x060400 PCIe Root Port
[ 0.328675] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.328680] pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff]
[ 0.328689] pci 0000:00:08.1: enabling Extended Tags
[ 0.328723] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.328868] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
[ 0.328986] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
[ 0.329121] pci 0000:00:18.0: [1022:166a] type 00 class 0x060000 conventional PCI endpoint
[ 0.329161] pci 0000:00:18.1: [1022:166b] type 00 class 0x060000 conventional PCI endpoint
[ 0.329203] pci 0000:00:18.2: [1022:166c] type 00 class 0x060000 conventional PCI endpoint
[ 0.329243] pci 0000:00:18.3: [1022:166d] type 00 class 0x060000 conventional PCI endpoint
[ 0.329283] pci 0000:00:18.4: [1022:166e] type 00 class 0x060000 conventional PCI endpoint
[ 0.329322] pci 0000:00:18.5: [1022:166f] type 00 class 0x060000 conventional PCI endpoint
[ 0.329361] pci 0000:00:18.6: [1022:1670] type 00 class 0x060000 conventional PCI endpoint
[ 0.329402] pci 0000:00:18.7: [1022:1671] type 00 class 0x060000 conventional PCI endpoint
[ 0.329498] pci 0000:01:00.0: [177d:9702] type 00 class 0x020000 PCIe Endpoint
[ 0.329529] pci 0000:01:00.0: BAR 0 [mem 0xfff4800000-0xfff4ffffff 64bit pref]
[ 0.329532] pci 0000:01:00.0: BAR 2 [mem 0xfff0000000-0xfff3ffffff 64bit pref]
[ 0.329536] pci 0000:01:00.0: BAR 4 [mem 0xfffd100000-0xfffd1fffff 64bit pref]
[ 0.329538] pci 0000:01:00.0: ROM [mem 0xfcf10000-0xfcf1ffff pref]
[ 0.329626] pci 0000:01:00.0: VF BAR 0 [mem 0xfff9000000-0xfff90fffff 64bit pref]
[ 0.329628] pci 0000:01:00.0: VF BAR 0 [mem 0xfff9000000-0xfffcffffff 64bit pref]: contains BAR 0 for 64 VFs
[ 0.329790] pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:00:01.1 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 0.329866] pci 0000:01:00.1: [177d:9702] type 00 class 0x020000 PCIe Endpoint
[ 0.329897] pci 0000:01:00.1: BAR 0 [mem 0xfff4000000-0xfff47fffff 64bit pref]
[ 0.329900] pci 0000:01:00.1: BAR 2 [mem 0xffec000000-0xffefffffff 64bit pref]
[ 0.329903] pci 0000:01:00.1: BAR 4 [mem 0xfffd000000-0xfffd0fffff 64bit pref]
[ 0.329906] pci 0000:01:00.1: ROM [mem 0xfcf00000-0xfcf0ffff pref]
[ 0.329987] pci 0000:01:00.1: VF BAR 0 [mem 0xfff5000000-0xfff50fffff 64bit pref]
[ 0.329988] pci 0000:01:00.1: VF BAR 0 [mem 0xfff5000000-0xfff8ffffff 64bit pref]: contains BAR 0 for 64 VFs
[ 0.330203] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.330260] pci 0000:02:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
[ 0.330296] pci 0000:02:00.0: BAR 0 [mem 0xfc5a0000-0xfc5a7fff 64bit]
[ 0.330308] pci 0000:02:00.0: enabling Extended Tags
[ 0.330364] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.330507] pci 0000:02:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
[ 0.330547] pci 0000:02:00.1: BAR 5 [mem 0xfc580000-0xfc59ffff]
[ 0.330550] pci 0000:02:00.1: ROM [mem 0xfc500000-0xfc57ffff pref]
[ 0.330557] pci 0000:02:00.1: enabling Extended Tags
[ 0.330601] pci 0000:02:00.1: PME# supported from D3hot D3cold
[ 0.330683] pci 0000:02:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
[ 0.330708] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[ 0.330714] pci 0000:02:00.2: bridge window [io 0xd000-0xffff]
[ 0.330717] pci 0000:02:00.2: bridge window [mem 0xfa000000-0xfc4fffff]
[ 0.330737] pci 0000:02:00.2: enabling Extended Tags
[ 0.330783] pci 0000:02:00.2: PME# supported from D3hot D3cold
[ 0.330865] pci 0000:00:02.1: PCI bridge to [bus 02-08]
[ 0.330926] pci 0000:03:06.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.330951] pci 0000:03:06.0: PCI bridge to [bus 04-05]
[ 0.330957] pci 0000:03:06.0: bridge window [io 0xf000-0xffff]
[ 0.330961] pci 0000:03:06.0: bridge window [mem 0xfa000000-0xfc0fffff]
[ 0.330983] pci 0000:03:06.0: enabling Extended Tags
[ 0.331038] pci 0000:03:06.0: PME# supported from D3hot D3cold
[ 0.331130] pci 0000:03:07.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.331155] pci 0000:03:07.0: PCI bridge to [bus 06]
[ 0.331163] pci 0000:03:07.0: bridge window [mem 0xfc400000-0xfc4fffff]
[ 0.331186] pci 0000:03:07.0: enabling Extended Tags
[ 0.331240] pci 0000:03:07.0: PME# supported from D3hot D3cold
[ 0.331334] pci 0000:03:08.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.331359] pci 0000:03:08.0: PCI bridge to [bus 07]
[ 0.331365] pci 0000:03:08.0: bridge window [io 0xe000-0xefff]
[ 0.331368] pci 0000:03:08.0: bridge window [mem 0xfc300000-0xfc3fffff]
[ 0.331391] pci 0000:03:08.0: enabling Extended Tags
[ 0.331445] pci 0000:03:08.0: PME# supported from D3hot D3cold
[ 0.331538] pci 0000:03:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.331563] pci 0000:03:09.0: PCI bridge to [bus 08]
[ 0.331569] pci 0000:03:09.0: bridge window [io 0xd000-0xdfff]
[ 0.331573] pci 0000:03:09.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.331595] pci 0000:03:09.0: enabling Extended Tags
[ 0.331650] pci 0000:03:09.0: PME# supported from D3hot D3cold
[ 0.331747] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[ 0.331825] pci 0000:04:00.0: [1a03:1150] type 01 class 0x060400 PCIe to PCI/PCI-X bridge
[ 0.331866] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.331875] pci 0000:04:00.0: bridge window [io 0xf000-0xffff]
[ 0.331880] pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfc0fffff]
[ 0.331913] pci 0000:04:00.0: enabling Extended Tags
[ 0.332003] pci 0000:04:00.0: supports D1 D2
[ 0.332005] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.332126] pci 0000:03:06.0: PCI bridge to [bus 04-05]
[ 0.332187] pci_bus 0000:05: extended config space not accessible
[ 0.332213] pci 0000:05:00.0: [1a03:2000] type 00 class 0x030000 conventional PCI endpoint
[ 0.332285] pci 0000:05:00.0: BAR 0 [mem 0xfa000000-0xfbffffff]
[ 0.332288] pci 0000:05:00.0: BAR 1 [mem 0xfc000000-0xfc01ffff]
[ 0.332292] pci 0000:05:00.0: BAR 2 [io 0xf000-0xf07f]
[ 0.332319] pci 0000:05:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.332368] pci 0000:05:00.0: supports D1 D2
[ 0.332370] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.332491] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.332581] pci 0000:06:00.0: [144d:a809] type 00 class 0x010802 PCIe Endpoint
[ 0.332643] pci 0000:06:00.0: BAR 0 [mem 0xfc400000-0xfc403fff 64bit]
[ 0.332871] pci 0000:06:00.0: 7.876 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x1 link at 0000:03:07.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[ 0.332942] pci 0000:03:07.0: PCI bridge to [bus 06]
[ 0.333035] pci 0000:07:00.0: working around ROM BAR overlap defect
[ 0.333037] pci 0000:07:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint
[ 0.333126] pci 0000:07:00.0: BAR 0 [mem 0xfc300000-0xfc37ffff]
[ 0.333132] pci 0000:07:00.0: BAR 2 [io 0xe000-0xe01f]
[ 0.333136] pci 0000:07:00.0: BAR 3 [mem 0xfc380000-0xfc383fff]
[ 0.333288] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.333468] pci 0000:03:08.0: PCI bridge to [bus 07]
[ 0.333563] pci 0000:08:00.0: working around ROM BAR overlap defect
[ 0.333565] pci 0000:08:00.0: [8086:1533] type 00 class 0x020000 PCIe Endpoint
[ 0.333654] pci 0000:08:00.0: BAR 0 [mem 0xfc200000-0xfc27ffff]
[ 0.333660] pci 0000:08:00.0: BAR 2 [io 0xd000-0xd01f]
[ 0.333664] pci 0000:08:00.0: BAR 3 [mem 0xfc280000-0xfc283fff]
[ 0.333817] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.333997] pci 0000:03:09.0: PCI bridge to [bus 08]
[ 0.334081] pci 0000:09:00.0: [10b5:8718] type 01 class 0x060400 PCIe Switch Upstream Port
[ 0.334099] pci 0000:09:00.0: BAR 0 [mem 0xfce00000-0xfce3ffff]
[ 0.334103] pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
[ 0.334109] pci 0000:09:00.0: bridge window [mem 0xfcb00000-0xfcdfffff]
[ 0.334117] pci 0000:09:00.0: bridge window [mem 0xfffd300000-0xfffd5fffff 64bit pref]
[ 0.334189] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.334296] pci 0000:00:02.2: PCI bridge to [bus 09-0c]
[ 0.334344] pci 0000:0a:01.0: [10b5:8718] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.334364] pci 0000:0a:01.0: PCI bridge to [bus 0b]
[ 0.334371] pci 0000:0a:01.0: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.334379] pci 0000:0a:01.0: bridge window [mem 0xfffd500000-0xfffd5fffff 64bit pref]
[ 0.334453] pci 0000:0a:01.0: PME# supported from D0 D3hot D3cold
[ 0.334567] pci 0000:0a:02.0: [10b5:8718] type 01 class 0x060400 PCIe Switch Downstream Port
[ 0.334587] pci 0000:0a:02.0: PCI bridge to [bus 0c]
[ 0.334594] pci 0000:0a:02.0: bridge window [mem 0xfcb00000-0xfccfffff]
[ 0.334602] pci 0000:0a:02.0: bridge window [mem 0xfffd300000-0xfffd4fffff 64bit pref]
[ 0.334676] pci 0000:0a:02.0: PME# supported from D0 D3hot D3cold
[ 0.334800] pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
[ 0.334940] pci 0000:0b:00.0: [10df:e200] type 00 class 0x0c0400 PCIe Endpoint
[ 0.335606] pci 0000:0b:00.0: BAR 0 [mem 0xfffd508000-0xfffd50ffff 64bit pref]
[ 0.335633] pci 0000:0b:00.0: BAR 4 [mem 0xfffd510000-0xfffd510fff 64bit pref]
[ 0.335640] pci 0000:0b:00.0: ROM [mem 0xfcd80000-0xfcdfffff pref]
[ 0.335669] pci 0000:0b:00.0: enabling Extended Tags
[ 0.336691] pci 0000:0b:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:0a:01.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 0.336936] pci 0000:0b:00.1: [10df:e200] type 00 class 0x0c0400 PCIe Endpoint
[ 0.337590] pci 0000:0b:00.1: BAR 0 [mem 0xfffd500000-0xfffd507fff 64bit pref]
[ 0.337622] pci 0000:0b:00.1: ROM [mem 0xfcd00000-0xfcd7ffff pref]
[ 0.337650] pci 0000:0b:00.1: enabling Extended Tags
[ 0.339828] pci 0000:0a:01.0: PCI bridge to [bus 0b]
[ 0.339888] pci 0000:0c:00.0: [10df:0720] type 00 class 0x020000 PCIe Endpoint
[ 0.339936] pci 0000:0c:00.0: BAR 0 [mem 0xfffd40c000-0xfffd40ffff 64bit pref]
[ 0.339940] pci 0000:0c:00.0: BAR 2 [mem 0xfffd3e0000-0xfffd3fffff 64bit pref]
[ 0.339944] pci 0000:0c:00.0: BAR 4 [mem 0xfffd3c0000-0xfffd3dffff 64bit pref]
[ 0.339946] pci 0000:0c:00.0: ROM [mem 0xfcc80000-0xfccfffff pref]
[ 0.339955] pci 0000:0c:00.0: enabling Extended Tags
[ 0.340039] pci 0000:0c:00.0: PME# supported from D3hot D3cold
[ 0.340109] pci 0000:0c:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0000:0a:02.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 0.340195] pci 0000:0c:00.1: [10df:0720] type 00 class 0x020000 PCIe Endpoint
[ 0.340243] pci 0000:0c:00.1: BAR 0 [mem 0xfffd408000-0xfffd40bfff 64bit pref]
[ 0.340247] pci 0000:0c:00.1: BAR 2 [mem 0xfffd3a0000-0xfffd3bffff 64bit pref]
[ 0.340251] pci 0000:0c:00.1: BAR 4 [mem 0xfffd380000-0xfffd39ffff 64bit pref]
[ 0.340254] pci 0000:0c:00.1: ROM [mem 0xfcc00000-0xfcc7ffff pref]
[ 0.340262] pci 0000:0c:00.1: enabling Extended Tags
[ 0.340339] pci 0000:0c:00.1: PME# supported from D3hot D3cold
[ 0.340475] pci 0000:0c:00.2: [10df:0723] type 00 class 0x018000 PCIe Endpoint
[ 0.340521] pci 0000:0c:00.2: BAR 0 [mem 0xfffd404000-0xfffd407fff 64bit pref]
[ 0.340525] pci 0000:0c:00.2: BAR 2 [mem 0xfffd360000-0xfffd37ffff 64bit pref]
[ 0.340529] pci 0000:0c:00.2: BAR 4 [mem 0xfffd340000-0xfffd35ffff 64bit pref]
[ 0.340531] pci 0000:0c:00.2: ROM [mem 0xfcb80000-0xfcbfffff pref]
[ 0.340540] pci 0000:0c:00.2: enabling Extended Tags
[ 0.340617] pci 0000:0c:00.2: PME# supported from D3hot D3cold
[ 0.340752] pci 0000:0c:00.3: [10df:0723] type 00 class 0x018000 PCIe Endpoint
[ 0.340799] pci 0000:0c:00.3: BAR 0 [mem 0xfffd400000-0xfffd403fff 64bit pref]
[ 0.340803] pci 0000:0c:00.3: BAR 2 [mem 0xfffd320000-0xfffd33ffff 64bit pref]
[ 0.340807] pci 0000:0c:00.3: BAR 4 [mem 0xfffd300000-0xfffd31ffff 64bit pref]
[ 0.340810] pci 0000:0c:00.3: ROM [mem 0xfcb00000-0xfcb7ffff pref]
[ 0.340818] pci 0000:0c:00.3: enabling Extended Tags
[ 0.340895] pci 0000:0c:00.3: PME# supported from D3hot D3cold
[ 0.342827] pci 0000:0a:02.0: PCI bridge to [bus 0c]
[ 0.342962] pci 0000:0d:00.0: [1022:145a] type 00 class 0x130000 PCIe Legacy Endpoint
[ 0.342993] pci 0000:0d:00.0: enabling Extended Tags
[ 0.343174] pci 0000:0d:00.2: [1022:15df] type 00 class 0x108000 PCIe Endpoint
[ 0.343200] pci 0000:0d:00.2: BAR 2 [mem 0xfc900000-0xfc9fffff]
[ 0.343204] pci 0000:0d:00.2: BAR 5 [mem 0xfca48000-0xfca49fff]
[ 0.343210] pci 0000:0d:00.2: enabling Extended Tags
[ 0.343355] pci 0000:0d:00.3: [1022:1639] type 00 class 0x0c0330 PCIe Endpoint
[ 0.343381] pci 0000:0d:00.3: BAR 0 [mem 0xfc800000-0xfc8fffff 64bit]
[ 0.343390] pci 0000:0d:00.3: enabling Extended Tags
[ 0.343430] pci 0000:0d:00.3: PME# supported from D0 D3hot D3cold
[ 0.343542] pci 0000:0d:00.4: [1022:1639] type 00 class 0x0c0330 PCIe Endpoint
[ 0.343564] pci 0000:0d:00.4: BAR 0 [mem 0xfc700000-0xfc7fffff 64bit]
[ 0.343572] pci 0000:0d:00.4: enabling Extended Tags
[ 0.343606] pci 0000:0d:00.4: PME# supported from D0 D3hot D3cold
[ 0.343696] pci 0000:0d:00.5: [1022:15e2] type 00 class 0x048000 PCIe Endpoint
[ 0.343716] pci 0000:0d:00.5: BAR 0 [mem 0xfca00000-0xfca3ffff]
[ 0.343724] pci 0000:0d:00.5: enabling Extended Tags
[ 0.343756] pci 0000:0d:00.5: PME# supported from D0 D3hot D3cold
[ 0.343841] pci 0000:0d:00.6: [1022:15e3] type 00 class 0x040300 PCIe Endpoint
[ 0.343862] pci 0000:0d:00.6: BAR 0 [mem 0xfca40000-0xfca47fff]
[ 0.343870] pci 0000:0d:00.6: enabling Extended Tags
[ 0.343902] pci 0000:0d:00.6: PME# supported from D0 D3hot D3cold
[ 0.344001] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.346522] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[ 0.346569] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[ 0.346609] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[ 0.346658] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[ 0.346702] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[ 0.346739] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[ 0.346776] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[ 0.346816] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[ 0.347502] iommu: Default domain type: Translated
[ 0.347504] iommu: DMA domain TLB invalidation policy: lazy mode
[ 0.347518] pps_core: LinuxPPS API ver. 1 registered
[ 0.347518] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.347518] PTP clock support registered
[ 0.347809] efivars: Registered efivars operations
[ 0.348015] NetLabel: Initializing
[ 0.348017] NetLabel: domain hash size = 128
[ 0.348018] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.348035] NetLabel: unlabeled traffic allowed by default
[ 0.348040] PCI: Using ACPI for IRQ routing
[ 0.352031] PCI: pci_cache_line_size set to 64 bytes
[ 0.352135] e820: reserve RAM buffer [mem 0x09bff000-0x0bffffff]
[ 0.352137] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.352138] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.352139] e820: reserve RAM buffer [mem 0xb3d3f000-0xb3ffffff]
[ 0.352141] e820: reserve RAM buffer [mem 0xb6ecb000-0xb7ffffff]
[ 0.352142] e820: reserve RAM buffer [mem 0xb7b3b000-0xb7ffffff]
[ 0.352143] e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
[ 0.352144] e820: reserve RAM buffer [mem 0x83e300000-0x83fffffff]
[ 0.352222] pci 0000:05:00.0: vgaarb: setting as boot VGA device
[ 0.352222] pci 0000:05:00.0: vgaarb: bridge control possible
[ 0.352222] pci 0000:05:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.352222] vgaarb: loaded
[ 0.352222] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.352222] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.353827] clocksource: Switched to clocksource tsc-early
[ 0.353964] pnp: PnP ACPI init
[ 0.354040] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.354107] system 00:01: [mem 0x1000000000000 window] could not be reserved
[ 0.354356] system 00:03: [io 0x0a00-0x0a0f] has been reserved
[ 0.354359] system 00:03: [io 0x0a10-0x0a1f] has been reserved
[ 0.354360] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 0.354362] system 00:03: [io 0x0a30-0x0a3f] has been reserved
[ 0.354364] system 00:03: [io 0x0a40-0x0a4f] has been reserved
[ 0.354566] pnp 00:04: [dma 0 disabled]
[ 0.354809] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.354812] system 00:05: [io 0x040b] has been reserved
[ 0.354813] system 00:05: [io 0x04d6] has been reserved
[ 0.354815] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.354817] system 00:05: [io 0x0c14] has been reserved
[ 0.354818] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.354820] system 00:05: [io 0x0c52] has been reserved
[ 0.354822] system 00:05: [io 0x0c6c] has been reserved
[ 0.354823] system 00:05: [io 0x0c6f] has been reserved
[ 0.354825] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.354827] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.354828] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.354830] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.354832] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.354833] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.354835] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.354837] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.354839] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.354841] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.354843] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.354844] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.354846] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.355415] pnp: PnP ACPI: found 6 devices
[ 0.361317] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.361393] NET: Registered PF_INET protocol family
[ 0.361553] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.371107] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.371132] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.371278] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.371551] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.371633] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.371759] MPTCP token hash table entries: 32768 (order: 8, 786432 bytes, linear)
[ 0.371853] UDP hash table entries: 16384 (order: 8, 1048576 bytes, linear)
[ 0.371978] UDP-Lite hash table entries: 16384 (order: 8, 1048576 bytes, linear)
[ 0.372064] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.372071] NET: Registered PF_XDP protocol family
[ 0.372091] pci 0000:00:01.1: PCI bridge to [bus 01]
[ 0.372095] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.372098] pci 0000:00:01.1: bridge window [mem 0xffec000000-0xfffd1fffff 64bit pref]
[ 0.372104] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.372112] pci 0000:04:00.0: bridge window [io 0xf000-0xffff]
[ 0.372118] pci 0000:04:00.0: bridge window [mem 0xfa000000-0xfc0fffff]
[ 0.372130] pci 0000:03:06.0: PCI bridge to [bus 04-05]
[ 0.372132] pci 0000:03:06.0: bridge window [io 0xf000-0xffff]
[ 0.372136] pci 0000:03:06.0: bridge window [mem 0xfa000000-0xfc0fffff]
[ 0.372144] pci 0000:03:07.0: PCI bridge to [bus 06]
[ 0.372148] pci 0000:03:07.0: bridge window [mem 0xfc400000-0xfc4fffff]
[ 0.372156] pci 0000:03:08.0: PCI bridge to [bus 07]
[ 0.372159] pci 0000:03:08.0: bridge window [io 0xe000-0xefff]
[ 0.372163] pci 0000:03:08.0: bridge window [mem 0xfc300000-0xfc3fffff]
[ 0.372170] pci 0000:03:09.0: PCI bridge to [bus 08]
[ 0.372173] pci 0000:03:09.0: bridge window [io 0xd000-0xdfff]
[ 0.372177] pci 0000:03:09.0: bridge window [mem 0xfc200000-0xfc2fffff]
[ 0.372184] pci 0000:02:00.2: PCI bridge to [bus 03-08]
[ 0.372187] pci 0000:02:00.2: bridge window [io 0xd000-0xffff]
[ 0.372191] pci 0000:02:00.2: bridge window [mem 0xfa000000-0xfc4fffff]
[ 0.372198] pci 0000:00:02.1: PCI bridge to [bus 02-08]
[ 0.372200] pci 0000:00:02.1: bridge window [io 0xd000-0xffff]
[ 0.372203] pci 0000:00:02.1: bridge window [mem 0xfa000000-0xfc5fffff]
[ 0.372208] pci 0000:0a:01.0: PCI bridge to [bus 0b]
[ 0.372214] pci 0000:0a:01.0: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.372217] pci 0000:0a:01.0: bridge window [mem 0xfffd500000-0xfffd5fffff 64bit pref]
[ 0.372222] pci 0000:0a:02.0: PCI bridge to [bus 0c]
[ 0.372226] pci 0000:0a:02.0: bridge window [mem 0xfcb00000-0xfccfffff]
[ 0.372229] pci 0000:0a:02.0: bridge window [mem 0xfffd300000-0xfffd4fffff 64bit pref]
[ 0.372234] pci 0000:09:00.0: PCI bridge to [bus 0a-0c]
[ 0.372237] pci 0000:09:00.0: bridge window [mem 0xfcb00000-0xfcdfffff]
[ 0.372240] pci 0000:09:00.0: bridge window [mem 0xfffd300000-0xfffd5fffff 64bit pref]
[ 0.372245] pci 0000:00:02.2: PCI bridge to [bus 09-0c]
[ 0.372248] pci 0000:00:02.2: bridge window [mem 0xfcb00000-0xfcefffff]
[ 0.372250] pci 0000:00:02.2: bridge window [mem 0xfffd300000-0xfffd5fffff 64bit pref]
[ 0.372255] pci 0000:00:08.1: PCI bridge to [bus 0d]
[ 0.372258] pci 0000:00:08.1: bridge window [mem 0xfc700000-0xfcafffff]
[ 0.372263] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.372265] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.372267] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.372268] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.372270] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[ 0.372271] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfdffffff window]
[ 0.372273] pci_bus 0000:00: resource 10 [mem 0x840000000-0xffffffffff window]
[ 0.372275] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 0.372276] pci_bus 0000:01: resource 2 [mem 0xffec000000-0xfffd1fffff 64bit pref]
[ 0.372278] pci_bus 0000:02: resource 0 [io 0xd000-0xffff]
[ 0.372280] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfc5fffff]
[ 0.372281] pci_bus 0000:03: resource 0 [io 0xd000-0xffff]
[ 0.372283] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfc4fffff]
[ 0.372285] pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
[ 0.372286] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfc0fffff]
[ 0.372288] pci_bus 0000:05: resource 0 [io 0xf000-0xffff]
[ 0.372289] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfc0fffff]
[ 0.372291] pci_bus 0000:06: resource 1 [mem 0xfc400000-0xfc4fffff]
[ 0.372292] pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
[ 0.372294] pci_bus 0000:07: resource 1 [mem 0xfc300000-0xfc3fffff]
[ 0.372296] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
[ 0.372297] pci_bus 0000:08: resource 1 [mem 0xfc200000-0xfc2fffff]
[ 0.372299] pci_bus 0000:09: resource 1 [mem 0xfcb00000-0xfcefffff]
[ 0.372300] pci_bus 0000:09: resource 2 [mem 0xfffd300000-0xfffd5fffff 64bit pref]
[ 0.372302] pci_bus 0000:0a: resource 1 [mem 0xfcb00000-0xfcdfffff]
[ 0.372303] pci_bus 0000:0a: resource 2 [mem 0xfffd300000-0xfffd5fffff 64bit pref]
[ 0.372305] pci_bus 0000:0b: resource 1 [mem 0xfcd00000-0xfcdfffff]
[ 0.372306] pci_bus 0000:0b: resource 2 [mem 0xfffd500000-0xfffd5fffff 64bit pref]
[ 0.372308] pci_bus 0000:0c: resource 1 [mem 0xfcb00000-0xfccfffff]
[ 0.372310] pci_bus 0000:0c: resource 2 [mem 0xfffd300000-0xfffd4fffff 64bit pref]
[ 0.372311] pci_bus 0000:0d: resource 1 [mem 0xfc700000-0xfcafffff]
[ 0.372560] pci 0000:0d:00.3: extending delay after power-on from D3hot to 20 msec
[ 0.372656] pci 0000:0d:00.4: extending delay after power-on from D3hot to 20 msec
[ 0.372721] PCI: CLS 64 bytes, default 64
[ 0.372741] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 0.372777] Trying to unpack rootfs image as initramfs...
[ 0.372831] pci 0000:00:01.0: Adding to iommu group 0
[ 0.372851] pci 0000:00:01.1: Adding to iommu group 1
[ 0.372891] pci 0000:00:02.0: Adding to iommu group 2
[ 0.372908] pci 0000:00:02.1: Adding to iommu group 3
[ 0.372926] pci 0000:00:02.2: Adding to iommu group 4
[ 0.372958] pci 0000:00:08.0: Adding to iommu group 5
[ 0.372975] pci 0000:00:08.1: Adding to iommu group 6
[ 0.373006] pci 0000:00:14.0: Adding to iommu group 7
[ 0.373022] pci 0000:00:14.3: Adding to iommu group 7
[ 0.373097] pci 0000:00:18.0: Adding to iommu group 8
[ 0.373112] pci 0000:00:18.1: Adding to iommu group 8
[ 0.373127] pci 0000:00:18.2: Adding to iommu group 8
[ 0.373142] pci 0000:00:18.3: Adding to iommu group 8
[ 0.373157] pci 0000:00:18.4: Adding to iommu group 8
[ 0.373173] pci 0000:00:18.5: Adding to iommu group 8
[ 0.373188] pci 0000:00:18.6: Adding to iommu group 8
[ 0.373203] pci 0000:00:18.7: Adding to iommu group 8
[ 0.373238] pci 0000:01:00.0: Adding to iommu group 9
[ 0.373255] pci 0000:01:00.1: Adding to iommu group 9
[ 0.373293] pci 0000:02:00.0: Adding to iommu group 10
[ 0.373310] pci 0000:02:00.1: Adding to iommu group 10
[ 0.373328] pci 0000:02:00.2: Adding to iommu group 10
[ 0.373334] pci 0000:03:06.0: Adding to iommu group 10
[ 0.373340] pci 0000:03:07.0: Adding to iommu group 10
[ 0.373346] pci 0000:03:08.0: Adding to iommu group 10
[ 0.373352] pci 0000:03:09.0: Adding to iommu group 10
[ 0.373358] pci 0000:04:00.0: Adding to iommu group 10
[ 0.373374] pci 0000:05:00.0: Adding to iommu group 10
[ 0.373381] pci 0000:06:00.0: Adding to iommu group 10
[ 0.373388] pci 0000:07:00.0: Adding to iommu group 10
[ 0.373394] pci 0000:08:00.0: Adding to iommu group 10
[ 0.373411] pci 0000:09:00.0: Adding to iommu group 11
[ 0.373429] pci 0000:0a:01.0: Adding to iommu group 12
[ 0.373448] pci 0000:0a:02.0: Adding to iommu group 13
[ 0.373480] pci 0000:0b:00.0: Adding to iommu group 14
[ 0.373501] pci 0000:0b:00.1: Adding to iommu group 14
[ 0.373519] pci 0000:0c:00.0: Adding to iommu group 15
[ 0.373538] pci 0000:0c:00.1: Adding to iommu group 16
[ 0.373570] pci 0000:0c:00.2: Adding to iommu group 17
[ 0.373592] pci 0000:0c:00.3: Adding to iommu group 17
[ 0.373626] pci 0000:0d:00.0: Adding to iommu group 18
[ 0.373645] pci 0000:0d:00.2: Adding to iommu group 19
[ 0.373664] pci 0000:0d:00.3: Adding to iommu group 20
[ 0.373683] pci 0000:0d:00.4: Adding to iommu group 21
[ 0.373702] pci 0000:0d:00.5: Adding to iommu group 22
[ 0.373722] pci 0000:0d:00.6: Adding to iommu group 23
[ 0.375760] AMD-Vi: Extended features (0x206d73ef22254ade, 0x0): PPR X2APIC NX GT IA GA PC GA_vAPIC
[ 0.375768] AMD-Vi: Interrupt remapping enabled
[ 0.375769] AMD-Vi: X2APIC enabled
[ 0.387282] AMD-Vi: Virtual APIC enabled
[ 0.387289] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.387292] software IO TLB: mapped [mem 0x00000000a9a56000-0x00000000ada56000] (64MB)
[ 0.387342] LVT offset 0 assigned for vector 0x400
[ 0.387571] perf: AMD IBS detected (0x000003ff)
[ 0.387576] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.388258] Initialise system trusted keyrings
[ 0.388299] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 0.396585] Key type asymmetric registered
[ 0.396587] Asymmetric key parser 'x509' registered
[ 0.396607] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.396643] io scheduler mq-deadline registered
[ 0.396644] io scheduler kyber registered
[ 0.396653] io scheduler bfq registered
[ 0.397716] pcieport 0000:00:01.1: PME: Signaling with IRQ 28
[ 0.397867] pcieport 0000:00:02.1: PME: Signaling with IRQ 29
[ 0.398003] pcieport 0000:00:02.2: PME: Signaling with IRQ 30
[ 0.398149] pcieport 0000:00:08.1: PME: Signaling with IRQ 31
[ 0.398289] pcieport 0000:00:02.1: can't derive routing for PCI INT C
[ 0.398292] pcieport 0000:02:00.2: PCI INT C: not connected
[ 0.398357] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 0.398358] pcieport 0000:03:06.0: PCI INT A: not connected
[ 0.398508] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 0.398510] pcieport 0000:03:07.0: PCI INT A: not connected
[ 0.398818] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 0.398820] pcieport 0000:03:09.0: PCI INT A: not connected
[ 0.400189] Monitor-Mwait will be used to enter C-1 state
[ 0.401735] Estimated ratio of average max frequency by base frequency (times 1024): 1176
[ 0.401750] ERST DBG: ERST support is disabled.
[ 0.401849] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.402059] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.403737] ACPI: bus type drm_connector registered
[ 0.403776] ast 0000:05:00.0: vgaarb: deactivate vga console
[ 0.403806] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 0.403808] pci 0000:04:00.0: PCI INT A: not connected
[ 0.403833] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 0.403835] ast 0000:05:00.0: PCI INT A: not connected
[ 0.403857] ast 0000:05:00.0: Using P2A bridge for configuration
[ 0.403858] ast 0000:05:00.0: AST 2500 detected
[ 0.403887] ast 0000:05:00.0: [drm] Using analog VGA
[ 0.404017] [drm] Initialized ast 0.1.0 for 0000:05:00.0 on minor 0
[ 0.408076] fbcon: astdrmfb (fb0) is primary device
[ 0.408080] fbcon: Deferring console take-over
[ 0.408082] ast 0000:05:00.0: [drm] fb0: astdrmfb frame buffer device
[ 0.426753] brd: module loaded
[ 0.426883] i8042: PNP: No PS/2 controller found.
[ 0.426884] i8042: Probing ports directly.
[ 0.427730] i8042: No controller found
[ 0.427761] rtc_cmos 00:02: RTC can wake from S4
[ 0.428020] rtc_cmos 00:02: registered as rtc0
[ 0.428051] rtc_cmos 00:02: setting system clock to 2026-04-24T22:37:28 UTC (1777070248)
[ 0.428080] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram
[ 0.429195] NET: Registered PF_INET6 protocol family
[ 0.429376] Segment Routing with IPv6
[ 0.429384] In-situ OAM (IOAM) with IPv6
[ 0.429398] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 0.429641] Key type dns_resolver registered
[ 0.431756] x86/amd: Previous system reset reason [0x00080800]: software wrote 0x6 to reset control register 0xCF9
[ 0.431766] microcode: Current revision: 0x0a50000f
[ 0.433113] resctrl: L3 allocation detected
[ 0.433114] resctrl: MB allocation detected
[ 0.433115] resctrl: L3 monitoring detected
[ 0.433132] IPI shorthand broadcast: enabled
[ 0.435259] sched_clock: Marking stable (434848666, 229426)->(448508307, -13430215)
[ 0.435562] registered taskstats version 1
[ 0.435825] Loading compiled-in X.509 certificates
[ 0.447707] Freeing initrd memory: 18508K
[ 0.450632] Loaded X.509 cert 'alpinelinux.org: Build time autogenerated kernel key: d7155500c185eadf269f9cc06936306c9cd86538'
[ 0.453164] Demotion targets for Node 0: null
[ 0.453211] Key type .fscrypt registered
[ 0.453213] Key type fscrypt-provisioning registered
[ 0.453516] RAS: Correctable Errors collector initialized.
[ 0.456238] clk: Disabling unused clocks
[ 0.456240] PM: genpd: Disabling unused power domains
[ 0.457461] Freeing unused kernel image (initmem) memory: 3068K
[ 0.457477] Write protecting the kernel read-only data: 28672k
[ 0.457729] Freeing unused kernel image (text/rodata gap) memory: 496K
[ 0.458002] Freeing unused kernel image (rodata/data gap) memory: 1520K
[ 0.458008] Run /init as init process
[ 0.458009] with arguments:
[ 0.458011] /init
[ 0.458012] with environment:
[ 0.458013] HOME=/
[ 0.458014] TERM=linux
[ 0.458015] modules=sd-mod,usb-storage,ext4
[ 0.463298] Alpine Init 3.13.0-r0
[ 0.463718] Loading boot drivers...
[ 0.472129] SCSI subsystem initialized
[ 0.483159] ACPI: bus type USB registered
[ 0.483183] usbcore: registered new interface driver usbfs
[ 0.483193] usbcore: registered new interface driver hub
[ 0.483204] usbcore: registered new device driver usb
[ 0.485123] usbcore: registered new interface driver usb-storage
[ 0.519754] loop: module loaded
[ 0.519978] Loading boot drivers: ok.
[ 0.520822] Mounting root...
[ 0.571128] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.571136] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 0.626884] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
[ 0.627197] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.627200] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 0.627203] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.627263] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.627266] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.627268] usb usb1: Product: xHCI Host Controller
[ 0.627269] usb usb1: Manufacturer: Linux 6.18.19-0-lts-tschicke xhci-hcd
[ 0.627271] usb usb1: SerialNumber: 0000:02:00.0
[ 0.627411] hub 1-0:1.0: USB hub found
[ 0.627425] hub 1-0:1.0: 10 ports detected
[ 0.627782] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.627804] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 0.627806] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.627807] usb usb2: Product: xHCI Host Controller
[ 0.627809] usb usb2: Manufacturer: Linux 6.18.19-0-lts-tschicke xhci-hcd
[ 0.627810] usb usb2: SerialNumber: 0000:02:00.0
[ 0.627904] hub 2-0:1.0: USB hub found
[ 0.627915] hub 2-0:1.0: 4 ports detected
[ 0.628156] xhci_hcd 0000:0d:00.3: xHCI Host Controller
[ 0.628160] xhci_hcd 0000:0d:00.3: new USB bus registered, assigned bus number 3
[ 0.628253] xhci_hcd 0000:0d:00.3: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000010
[ 0.628515] xhci_hcd 0000:0d:00.3: xHCI Host Controller
[ 0.628520] xhci_hcd 0000:0d:00.3: new USB bus registered, assigned bus number 4
[ 0.628522] xhci_hcd 0000:0d:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.628553] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.628555] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.628556] usb usb3: Product: xHCI Host Controller
[ 0.628558] usb usb3: Manufacturer: Linux 6.18.19-0-lts-tschicke xhci-hcd
[ 0.628559] usb usb3: SerialNumber: 0000:0d:00.3
[ 0.628657] hub 3-0:1.0: USB hub found
[ 0.628665] hub 3-0:1.0: 4 ports detected
[ 0.628853] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.628874] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 0.628876] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.628877] usb usb4: Product: xHCI Host Controller
[ 0.628878] usb usb4: Manufacturer: Linux 6.18.19-0-lts-tschicke xhci-hcd
[ 0.628880] usb usb4: SerialNumber: 0000:0d:00.3
[ 0.628970] hub 4-0:1.0: USB hub found
[ 0.628976] hub 4-0:1.0: 2 ports detected
[ 0.629143] xhci_hcd 0000:0d:00.4: xHCI Host Controller
[ 0.629147] xhci_hcd 0000:0d:00.4: new USB bus registered, assigned bus number 5
[ 0.629235] xhci_hcd 0000:0d:00.4: hcc params 0x0268ffe5 hci version 0x110 quirks 0x0000020000000010
[ 0.629488] xhci_hcd 0000:0d:00.4: xHCI Host Controller
[ 0.629491] xhci_hcd 0000:0d:00.4: new USB bus registered, assigned bus number 6
[ 0.629493] xhci_hcd 0000:0d:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.629525] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.629527] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.629529] usb usb5: Product: xHCI Host Controller
[ 0.629530] usb usb5: Manufacturer: Linux 6.18.19-0-lts-tschicke xhci-hcd
[ 0.629531] usb usb5: SerialNumber: 0000:0d:00.4
[ 0.629628] hub 5-0:1.0: USB hub found
[ 0.629636] hub 5-0:1.0: 4 ports detected
[ 0.629818] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.629840] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 0.629842] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.629843] usb usb6: Product: xHCI Host Controller
[ 0.629844] usb usb6: Manufacturer: Linux 6.18.19-0-lts-tschicke xhci-hcd
[ 0.629846] usb usb6: SerialNumber: 0000:0d:00.4
[ 0.629936] hub 6-0:1.0: USB hub found
[ 0.629942] hub 6-0:1.0: 2 ports detected
[ 0.677799] Emulex LightPulse Fibre Channel SCSI driver 14.4.0.11
[ 0.677802] Copyright (C) 2017-2025 Broadcom. All Rights Reserved. The term "Broadcom" refers to Broadcom Inc. and/or its subsidiaries.
[ 0.752405] lpfc 0000:0b:00.0: 0:6101 Disabling NVME support: Not supported by firmware (0 0) x3
[ 0.752411] lpfc 0000:0b:00.0: 0:2574 IO channels: hdwQ 12 IRQ 12 MRQ: 0
[ 0.758807] scsi host0: Emulex LPe16000 16Gb PCIe Obsolete, Unsupported Fibre Channel Adapter on PCI bus 0b device 00 irq 38 BSG PCI resettable
[ 0.832344] lpfc 0000:0b:00.0: 0:6468 Set host date / time: Status x10:
[ 0.940124] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 1.194887] lpfc 0000:0b:00.0: 0:3176 Port Name 0 Physical Link is functional
[ 1.270934] lpfc 0000:0b:00.1: 1:6101 Disabling NVME support: Not supported by firmware (0 0) x3
[ 1.270945] lpfc 0000:0b:00.1: 1:2574 IO channels: hdwQ 12 IRQ 12 MRQ: 0
[ 1.277733] scsi host1: Emulex LPe16000 16Gb PCIe Obsolete, Unsupported Fibre Channel Adapter on PCI bus 0b device 01 irq 40 BSG PCI resettable
[ 1.349551] lpfc 0000:0b:00.1: 1:6468 Set host date / time: Status x10:
[ 1.455452] tsc: Refined TSC clocksource calibration: 3593.231 MHz
[ 1.455460] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33cb592eeae, max_idle_ns: 440795368405 ns
[ 1.459560] clocksource: Switched to clocksource tsc
[ 1.726598] lpfc 0000:0b:00.1: 1:3176 Port Name 1 Physical Link is functional
[ 1.729587] nvme nvme0: pci function 0000:06:00.0
[ 1.729650] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 1.729652] nvme 0000:06:00.0: PCI INT A: not connected
[ 1.743204] nvme nvme0: D3 entry latency set to 8 seconds
[ 1.768952] nvme nvme0: allocated 64 MiB host memory buffer (1 segment).
[ 1.868429] nvme nvme0: 12/0/0 default/read/poll queues
[ 1.885286] nvme0n1: p1 p2 p3
[ 1.893779] libata version 3.00 loaded.
[ 1.896698] pcieport 0000:00:02.1: can't derive routing for PCI INT B
[ 1.896701] ahci 0000:02:00.1: PCI INT B: not connected
[ 1.896800] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
[ 1.896844] ahci 0000:02:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
[ 1.896847] ahci 0000:02:00.1: 6/6 ports implemented (port mask 0x3f)
[ 1.896848] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 1.897417] scsi host2: ahci
[ 1.897538] scsi host3: ahci
[ 1.897665] scsi host4: ahci
[ 1.897779] scsi host5: ahci
[ 1.897878] scsi host6: ahci
[ 1.897974] scsi host7: ahci
[ 1.898027] ata1: SATA max UDMA/133 abar m131072@0xfc580000 port 0xfc580100 irq 105 lpm-pol 1 ext
[ 1.898030] ata2: SATA max UDMA/133 abar m131072@0xfc580000 port 0xfc580180 irq 105 lpm-pol 1 ext
[ 1.898032] ata3: SATA max UDMA/133 abar m131072@0xfc580000 port 0xfc580200 irq 105 lpm-pol 1 ext
[ 1.898034] ata4: SATA max UDMA/133 abar m131072@0xfc580000 port 0xfc580280 irq 105 lpm-pol 1 ext
[ 1.898036] ata5: SATA max UDMA/133 abar m131072@0xfc580000 port 0xfc580300 irq 105 lpm-pol 1 ext
[ 1.898038] ata6: SATA max UDMA/133 abar m131072@0xfc580000 port 0xfc580380 irq 105 lpm-pol 1 ext
[ 2.205500] ata1: SATA link down (SStatus 0 SControl 330)
[ 2.520697] ata2: SATA link down (SStatus 0 SControl 330)
[ 2.845403] ata3: SATA link down (SStatus 0 SControl 330)
[ 3.165490] ata4: SATA link down (SStatus 0 SControl 330)
[ 3.408078] usb 1-3: New USB device found, idVendor=0781, idProduct=55a3, bcdDevice= 1.00
[ 3.408088] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.408091] usb 1-3: Product: SanDisk 3.2Gen1
[ 3.408094] usb 1-3: Manufacturer: USB
[ 3.408096] usb 1-3: SerialNumber: 00010514032424010746
[ 3.484523] ata5: SATA link down (SStatus 0 SControl 330)
[ 3.805411] ata6: SATA link down (SStatus 0 SControl 330)
[ 3.843600] scsi host8: uas
[ 3.843706] usbcore: registered new interface driver uas
[ 3.844454] scsi 8:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 7
[ 3.847667] sd 8:0:0:0: [sda] 240328704 512-byte logical blocks: (123 GB/115 GiB)
[ 3.847840] sd 8:0:0:0: [sda] Write Protect is off
[ 3.847842] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 3.848178] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.848268] sd 8:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 3.863414] device-mapper: uevent: version 1.0.3
[ 3.863473] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
[ 3.878958] sda: sda1 sda2
[ 3.879058] sd 8:0:0:0: [sda] Attached SCSI removable disk
[ 4.801147] EXT4-fs (dm-4): orphan cleanup on readonly fs
[ 4.801422] EXT4-fs (dm-4): mounted filesystem d8a01fd0-9ba0-4a40-8bac-58f3e25bf2cd ro with ordered data mode. Quota mode: disabled.
[ 4.801504] Mounting root: ok.
[ 4.824935] fbcon: Taking over console
[ 4.834125] Console: switching to colour frame buffer device 64x24
[ 5.212879] IPMI message handler: version 39.2
[ 5.214147] ipmi device interface
[ 5.216325] ipmi_si: IPMI System Interface driver
[ 5.216339] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
[ 5.216342] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 5.216344] ipmi_si: Adding SMBIOS-specified kcs state machine
[ 5.216385] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
[ 5.216488] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 5.216571] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
[ 5.216572] ipmi_si: Adding ACPI-specified kcs state machine
[ 5.216623] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[ 5.364343] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x003c0a, prod_id: 0x100f, dev_id: 0x20)
[ 5.448567] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 5.450561] ipmi_ssif: IPMI SSIF Interface driver
[ 5.451751] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 5.451784] ACPI: button: Power Button [PWRB]
[ 5.451853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 5.456259] ACPI: button: Power Button [PWRF]
[ 5.461349] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.461615] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:00/input/input2
[ 5.465620] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 5.465622] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 5.465624] RAPL PMU: hw unit of domain core 2^-16 Joules
[ 5.518106] ccp 0000:0d:00.2: enabling device (0000 -> 0002)
[ 5.518270] ccp 0000:0d:00.2: ccp: unable to access the device: you might be running a broken BIOS.
[ 5.519411] ccp 0000:0d:00.2: tee enabled
[ 5.519487] ccp 0000:0d:00.2: psp enabled
[ 5.525941] kvm_amd: TSC scaling supported
[ 5.525942] kvm_amd: Nested Virtualization enabled
[ 5.525944] kvm_amd: Nested Paging enabled
[ 5.525945] kvm_amd: LBR virtualization supported
[ 5.525948] kvm_amd: Virtual VMLOAD VMSAVE supported
[ 5.525949] kvm_amd: Virtual GIF supported
[ 5.535373] amd_atl: AMD Address Translation Library initialized
[ 5.535775] intel_rapl_common: Found RAPL domain package
[ 5.535778] intel_rapl_common: Found RAPL domain core
[ 5.577028] EDAC MC: Ver: 3.0.0
[ 5.578129] MCE: In-kernel MCE decoding enabled.
[ 5.628979] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 5.628982] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 5.631253] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 5.632271] i2c i2c-3: Successfully instantiated SPD at 0x51
[ 5.633653] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 5.633724] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
[ 5.633808] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 5.789455] be2net 0000:0c:00.0: FW config: function_mode=0x10802, function_caps=0x7
[ 5.805454] be2net 0000:0c:00.0: Using profile 0x12
[ 5.813459] be2net 0000:0c:00.0: Max: txqs 34, rxqs 64, rss 64, eqs 32, vfs 0
[ 5.813466] be2net 0000:0c:00.0: Max: uc-macs 126, mc-macs 64, vlans 64
[ 5.813646] be2net 0000:0c:00.0: enabled 3 MSI-x vector(s) for NIC
[ 5.863605] be2net 0000:0c:00.0: created 3 TX queue(s)
[ 5.875545] be2net 0000:0c:00.0: created 3 RX queue(s)
[ 5.886722] be2net 0000:0c:00.0: FW version is 11.1.238.1
[ 5.982156] be2net 0000:0c:00.0: HW Flow control - TX:1 RX:1
[ 5.986014] be2net 0000:0c:00.0: Emulex OneConnect(Skyhawk): PF port 2
[ 5.998868] be2net 0000:0c:00.0 eth0: Link is Up
[ 6.000294] be2net 0000:0c:00.0 elxeth0: renamed from eth0
[ 6.115456] be2net 0000:0c:00.1: FW config: function_mode=0x10802, function_caps=0x7
[ 6.131453] be2net 0000:0c:00.1: Using profile 0x12
[ 6.139457] be2net 0000:0c:00.1: Max: txqs 34, rxqs 64, rss 64, eqs 32, vfs 0
[ 6.139464] be2net 0000:0c:00.1: Max: uc-macs 126, mc-macs 64, vlans 64
[ 6.139633] be2net 0000:0c:00.1: enabled 3 MSI-x vector(s) for NIC
[ 6.191458] be2net 0000:0c:00.1: created 3 TX queue(s)
[ 6.203454] be2net 0000:0c:00.1: created 3 RX queue(s)
[ 6.214091] be2net 0000:0c:00.1: FW version is 11.1.238.1
[ 6.307110] be2net 0000:0c:00.1: HW Flow control - TX:1 RX:1
[ 6.311026] be2net 0000:0c:00.1: Emulex OneConnect(Skyhawk): PF port 3
[ 6.314746] be2net 0000:0c:00.1 eth0: Link is Up
[ 6.316167] be2net 0000:0c:00.1 elxeth1: renamed from eth0
[ 6.320782] dca service started, version 1.12.1
[ 6.327476] igb: Intel(R) Gigabit Ethernet Network Driver
[ 6.327478] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 6.357138] igb 0000:07:00.0 eth2: renamed from eth0
[ 6.358123] igb 0000:07:00.0: added PHC on eth2
[ 6.358154] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 6.358156] igb 0000:07:00.0: eth2: (PCIe:2.5Gb/s:Width x1) d8:5e:d3:6f:e1:7d
[ 6.358218] igb 0000:07:00.0: eth2: PBA No: 000500-000
[ 6.358220] igb 0000:07:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 6.358419] pcieport 0000:00:02.1: can't derive routing for PCI INT A
[ 6.358422] igb 0000:08:00.0: PCI INT A: not connected
[ 6.387992] igb 0000:08:00.0 eth3: renamed from eth0
[ 6.388320] igb 0000:08:00.0: added PHC on eth3
[ 6.388351] igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 6.388353] igb 0000:08:00.0: eth3: (PCIe:2.5Gb/s:Width x1) d8:5e:d3:6f:e1:7e
[ 6.388415] igb 0000:08:00.0: eth3: PBA No: 000500-000
[ 6.388417] igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 6.441598] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.706467] udevd[2854]: starting version 3.2.14
[ 6.715539] udevd[2854]: starting eudev-3.2.14
[ 6.750001] EXT4-fs (dm-4): re-mounted d8a01fd0-9ba0-4a40-8bac-58f3e25bf2cd r/w.
[ 6.753944] EXT4-fs (dm-4): re-mounted d8a01fd0-9ba0-4a40-8bac-58f3e25bf2cd.
[ 6.843423] FAT-fs (nvme0n1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 7.180256] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[ 7.189869] XFS (dm-0): Mounting V5 Filesystem 31bee40c-84a8-406a-9d5c-4cd1e7fec067
[ 7.200789] XFS (dm-0): Ending clean mount
[ 7.202803] XFS (dm-1): Mounting V5 Filesystem f1ca1d2a-5c79-4009-b11e-3f3def629b20
[ 7.217167] XFS (dm-1): Ending clean mount
[ 7.273009] NET: Registered PF_PACKET protocol family
[ 7.278693] nvme nvme0: using unchecked data buffer
[ 7.288104] Loading iSCSI transport class v2.0-870.
[ 7.296479] iscsi: registered transport (be2iscsi)
[ 7.296482] In beiscsi_module_init, tt=000000006f32335a
[ 8.123223] be2net 0000:0c:00.0 elxeth0: Link is Up
[ 10.181057] be2net 0000:0c:00.1 elxeth1: Link is Up
[ 11.430976] bonding: bond1 is being created...
[ 11.486244] bond1: (slave eth2): Enslaving as an active interface with a down link
[ 11.565828] bond1: (slave eth3): Enslaving as an active interface with a down link
[ 11.596979] be2net 0000:0c:00.0: MAC address changed to d8:5e:d3:6f:e1:7d
[ 11.605044] be2net 0000:0c:00.0 elxeth0: Link is Up
[ 11.609307] be2net 0000:0c:00.0: MAC address changed to 00:10:9b:b0:14:9b
[ 11.609351] bond1: (slave elxeth0): making interface the new active one
[ 11.611184] be2net 0000:0c:00.0: MAC address changed to d8:5e:d3:6f:e1:7d
[ 11.611199] bond1: (slave elxeth0): Enslaving as an active interface with an up link
[ 11.641925] be2net 0000:0c:00.1: MAC address changed to d8:5e:d3:6f:e1:7d
[ 11.649984] be2net 0000:0c:00.1 elxeth1: Link is Up
[ 11.654341] be2net 0000:0c:00.1: MAC address changed to 00:10:9b:b0:14:9d
[ 11.654395] bond1: (slave elxeth1): Enslaving as an active interface with an up link
[ 21.187713] RPC: Registered named UNIX socket transport module.
[ 21.187715] RPC: Registered udp transport module.
[ 21.187717] RPC: Registered tcp transport module.
[ 21.187718] RPC: Registered tcp-with-tls transport module.
[ 21.187719] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 22.513050] NFSD: Using UMH upcall client tracking operations.
[ 22.513849] NFSD: Using UMH upcall client tracking operations.
[ 22.513852] NFSD: starting 90-second grace period (net effffff9)
[ 135.247647] LiquidIO 0000:01:00.0: Initializing device 177d:9702.
[ 135.247755] LiquidIO 0000:01:00.0: trs:64 max_vfs:52 rings_per_vf:1 pf_srn:52 num_pf_rings:12
[ 146.470591] LiquidIO 0000:01:00.0: Firmware version: 1.7.2
[ 146.470595] LiquidIO 0000:01:00.0: octeon_download_firmware: Loading 1 images
[ 146.470598] LiquidIO 0000:01:00.0: Loading firmware 1285952 at 21000000
[ 146.493182] LiquidIO 0000:01:00.0: Writing boot command: bootoct 0x21000000 numcores=$(numcores) time_sec=1777070395 time_nsec=255124714
[ 146.504785] LiquidIO 0000:01:00.1: Initializing device 177d:9702.
[ 146.504947] LiquidIO 0000:01:00.1: trs:64 max_vfs:52 rings_per_vf:1 pf_srn:52 num_pf_rings:12
[ 149.395217] LiquidIO 0000:01:00.1: Running NIC (1500000000 Hz)
[ 149.395244] LiquidIO 0000:01:00.0: Running NIC (1500000000 Hz)
[ 150.005065] LiquidIO 0000:01:00.1: eth%d VLAN filter enabled
[ 150.017064] LiquidIO 0000:01:00.1 eth0: RX Checksum Offload Enabled
[ 150.028065] LiquidIO 0000:01:00.1 eth0: TX Checksum Offload Enabled
[ 150.081089] LiquidIO 0000:01:00.0: eth%d VLAN filter enabled
[ 150.093064] LiquidIO 0000:01:00.0 eth1: RX Checksum Offload Enabled
[ 150.103072] LiquidIO 0000:01:00.0 eth1: TX Checksum Offload Enabled
[ 211.083367] LiquidIO 0000:01:00.1: lio_set_link_ksettings: Changing speed is not supported
[ 269.035865] LiquidIO 0000:01:00.1 eth0: Link Down
[ 269.035873] LiquidIO 0000:01:00.1 eth0: Max MTU changed from 1500 to 16000
[ 269.037088] LiquidIO 0000:01:00.1: eth0 interface is opened
[ 270.866922] LiquidIO 0000:01:00.0 eth1: Link Down
[ 270.866928] LiquidIO 0000:01:00.0 eth1: Max MTU changed from 1500 to 16000
[ 270.866956] LiquidIO 0000:01:00.0: eth1 interface is opened
tschike:~# ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:0F:B7:C9:13:3D
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
tschike:~# ifconfig eth1
eth1 Link encap:Ethernet HWaddr 00:0F:B7:C9:13:3C
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
tschike:~# ethtool eth1
Settings for eth1:
Supported ports: [ FIBRE ]
Supported link modes: 25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: off
Port: FIBRE
PHYAD: 0
Transceiver: external
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
tschike:~# ethtool eth0
Settings for eth0:
Supported ports: [ FIBRE ]
Supported link modes: 25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: off
Port: FIBRE
PHYAD: 0
Transceiver: external
Current message level: 0x00000007 (7)
drv probe link
Link detected: no
tschike:~#
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment