| # This file contains common pin mappings for the BIGTREETECH SKR mini | |
| # E3 v2.0. To use this config, the firmware should be compiled for the | |
| # STM32F103 with a "28KiB bootloader" and USB communication. Also, | |
| # select "Enable extra low-level configuration options" and configure | |
| # "GPIO pins to set at micro-controller startup" to "!PA14". | |
| # The "make flash" command does not work on the SKR mini E3. Instead, | |
| # after running "make", copy the generated "out/klipper.bin" file to a | |
| # file named "firmware.bin" on an SD card and then restart the SKR | |
| # mini E3 with that SD card. |
Recently found some clowny gist was the top result for 'google takeout multiple tgz', where it was using two bash scripts to extract all the tgz files and then merge them together. Don't do that. Use brace expansion, cat the TGZs, and extract:
$ cat takeout-20201023T123551Z-{001..011}.tgz | tar xzivf -You don't even need to use brace expansion. Globbing will order the files numerically:
$ cat takeout-20201023T123551Z-*.tgz | tar xzivf -