-
-
Save AndersGM/0dd667283176a4f0d7af44b8a37c6a10 to your computer and use it in GitHub Desktop.
Minimal instructions for installing arch linux on an UEFI system with full system encryption using dm-crypt and luks
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # Install ARCH Linux with encrypted file-system and UEFI | |
| # The official installation guide (https://wiki.archlinux.org/index.php/Installation_Guide) contains a more verbose description. | |
| # Download the archiso image from https://www.archlinux.org/ | |
| # Copy to a usb-drive | |
| dd if=archlinux.img of=/dev/sdX bs=16M && sync # on linux | |
| # Boot from the usb. If the usb fails to boot, make sure that secure boot is disabled in the BIOS configuration. | |
| # Create partitions | |
| cgdisk /dev/sdX | |
| 1 100MB EFI partition # Hex code ef00 | |
| 2 250MB Boot partition # Hex code 8300 | |
| 3 100% size partiton # (to be encrypted) Hex code 8300 | |
| mkfs.vfat -F32 /dev/sdX1 | |
| mkfs.ext2 /dev/sdX2 | |
| # Setup the encryption of the system | |
| cryptsetup -c aes-xts-plain64 -y --use-random luksFormat /dev/sdX3 | |
| cryptsetup luksOpen /dev/sdX3 luks | |
| # Create encrypted partitions | |
| # This creates one partions for root, modify if /home or other partitions should be on separate partitions | |
| pvcreate /dev/mapper/luks | |
| vgcreate vg0 /dev/mapper/luks | |
| lvcreate --size 8G vg0 --name swap | |
| lvcreate --size 35G vg0 --name root | |
| lvcreate -l +100%FREE vg0 --name home | |
| # Create filesystems on encrypted partitions | |
| mkfs.ext4 /dev/mapper/vg0-root | |
| mkfs.ext4 /dev/mapper/vg0-home | |
| mkswap /dev/mapper/vg0-swap | |
| # Mount the new system | |
| mount /dev/mapper/vg0-root /mnt # /mnt is the installed system | |
| swapon /dev/mapper/vg0-swap # Not needed but a good thing to test | |
| mkdir /mnt/boot | |
| mount /dev/sdX2 /mnt/boot | |
| mkdir /mnt/boot/efi | |
| mount /dev/sdX1 /mnt/boot/efi | |
| # Install the system also includes stuff needed for starting wifi when first booting into the newly installed system | |
| # Unless vim and zsh are desired these can be removed from the command | |
| pacstrap /mnt base base-devel grub-efi-x86_64 zsh vim git efibootmgr dialog wpa_supplicant | |
| # 'install' fstab | |
| genfstab -pU /mnt >> /mnt/etc/fstab | |
| # Make /tmp a ramdisk (add the following line to /mnt/etc/fstab) | |
| tmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0 | |
| # Change relatime on all non-boot partitions to noatime (reduces wear if using an SSD) | |
| # Enter the new system | |
| arch-chroot /mnt /bin/bash | |
| # Setup system clock | |
| ln -s /usr/share/zoneinfo/Europe/Stockholm /etc/localtime | |
| hwclock --systohc --utc | |
| # Set the hostname | |
| echo MYHOSTNAME > /etc/hostname | |
| # Update locale | |
| echo LANG=en_US.UTF-8 >> /etc/locale.conf | |
| echo LANGUAGE=en_US >> /etc/locale.conf | |
| echo LC_ALL=C >> /etc/locale.conf | |
| # Set password for root | |
| passwd | |
| # Add real user remove -s flag if you don't whish to use zsh | |
| # useradd -m -g users -G wheel -s /bin/zsh MYUSERNAME | |
| # passwd MYUSERNAME | |
| # Configure mkinitcpio with modules needed for the initrd image | |
| vim /etc/mkinitcpio.conf | |
| # Add 'ext4' to MODULES | |
| # Add 'encrypt' and 'lvm2' to HOOKS before filesystems | |
| # Regenerate initrd image | |
| mkinitcpio -p linux | |
| # Setup grub | |
| grub-install | |
| In /etc/default/grub edit the line GRUB_CMDLINE_LINUX to GRUB_CMDLINE_LINUX="cryptdevice=/dev/sdX3:luks:allow-discards" then run: | |
| grub-mkconfig -o /boot/grub/grub.cfg | |
| # If the above command hangs, do the following (source: https://bbs.archlinux.org/viewtopic.php?id=242594): | |
| exit | |
| mkdir /mnt/hostlvm | |
| mount --bind /run/lvm /mnt/hostlvm | |
| arch-chroot /mnt | |
| ln -s /hostlvm /run/lvm | |
| # Exit new system and go into the cd shell | |
| exit | |
| # Unmount all partitions | |
| umount -R /mnt | |
| swapoff -a | |
| # Reboot into the new system, don't forget to remove the cd/usb | |
| reboot | |
| # Postinstallation | |
| ## i3 | |
| pacman -S xf86-video-ati xorg lightdm lightdm-gtk-greeter i3 xterm | |
| systemctl enable lightdm |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment