How to install USB cable driver on Ubuntu22.04, please provide any steps.

hi there!
I tried to install it in raspberry pi 3b running bullseye but I get error: "./bin/lin/xsetup: line 21: /home/pi/Downloads/Xilinx_ISE_DS_Lin_14.7_1015_1/bin/lin/_xsetup: cannot execute binary file: Exec format error".. I successfully download the full package for Linux from AMD, copied it over to pi with WinSCP, unpacked it and run the installation command... is running x64 or x32 piOS importan?

hi there! I tried to install it in raspberry pi 3b running bullseye but I get error: "./bin/lin/xsetup: line 21: /home/pi/Downloads/Xilinx_ISE_DS_Lin_14.7_1015_1/bin/lin/_xsetup: cannot execute binary file: Exec format error".. I successfully download the full package for Linux from AMD, copied it over to pi with WinSCP, unpacked it and run the installation command... is running x64 or x32 piOS importan?

Hi. Xilinx ISE and Vivado is developed for X86 based platform. You can not run it on ARM machines. Therefore, yes running machine is important.

Thank you for your reply. I was following this guide and the author mentions about having it installed on the pi. So I thought it was possible.

https://linuxjedi.co.uk/2021/11/25/revisiting-xilinx-jtag-programming-from-a-raspberry-pi/

The proposed method in the article uses the RaspberryPI board to connect to the local machine (where the ISE tool-chain is installed on it). RaspberryPI board works as a JTAG programmer this scenario.
Actually you need ISE to generate bitstream which is not possible using It.

If you are interested in code synthesis on Raspberry, you can use the yosis open source toolchain and some other related tools.

I've tried a lot to download the installer file, but I'm getting this error:
"We cannot fulfill your request as your account has failed export compliance verification. If this verification is in error, please review the Export Compliance Information page - https://www.amd.com/en/site-notifications/export-compliance.html"

I think you have not access to your account on AMD/Xilinx to download the ISE. Its better you contact with vendor after trying new link bellow.
https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/vivado-design-tools/archive-ise.html

I think you have not access to your account on AMD/Xilinx to download the ISE. Its better you contact with vendor after trying new link bellow. https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/vivado-design-tools/archive-ise.html

I don't think so, I think AMD banned my country (Egypt) from downloading the program, I asked a friend in a different country to see if he could download it, and guess what? download is working.

Anyway, is the ISE full installer for Linux available on other site? e.g getintopc, Google drive,...

Yes. Maybe your country is banned! but I can not share any related link, you can search it.

I think you have not access to your account on AMD/Xilinx to download the ISE. Its better you contact with vendor after trying new link bellow. https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/vivado-design-tools/archive-ise.html

I don't think so, I think AMD banned my country (Egypt) from downloading the program, I asked a friend in a different country to see if he could download it, and guess what? download is working.

Anyway, is the ISE full installer for Linux available on other site? e.g getintopc, Google drive,...

I have run the installed and the program is installed in the selected directory. I have also run the settings64.sh. There is no menu item created and I cannot find which file to run to start the IDE. What file do I run?
Linux Mint 21.3 Virginia (Mate)

I have run the installed and the program is installed in the selected directory. I have also run the settings64.sh. There is no menu item created and I cannot find which file to run to start the IDE. What file do I run? Linux Mint 21.3 Virginia (Mate)

Alright, Can you start it via terminal command after sourcing the settings.sh via xise command?

There is no xise command.
`statik@statik-P15SM-A-SM1-A:/media/statik/Linux_Storage/Xilinx/14.7/ISE_DS$ source /media/statik/Linux_Storage/Xilinx/14.7/ISE_DS/ISE/.settings64.sh

statik@statik-P15SM-A-SM1-A:/media/statik/Linux_Storage/Xilinx/14.7/ISE_DS$ xise

Command 'xise' not found, did you mean:

command 'xine' from deb xine-ui (0.99.13-1)

Try: sudo apt install
`

There is no xise command. `statik@statik-P15SM-A-SM1-A:/media/statik/Linux_Storage/Xilinx/14.7/ISE_DS$ source /media/statik/Linux_Storage/Xilinx/14.7/ISE_DS/ISE/.settings64.sh

statik@statik-P15SM-A-SM1-A:/media/statik/Linux_Storage/Xilinx/14.7/ISE_DS$ xise

Command 'xise' not found, did you mean:

command 'xine' from deb xine-ui (0.99.13-1)

Try: sudo apt install `

please run ise command instead of xise. is it works?

There is no xise command. `statik@statik-P15SM-A-SM1-A:/media/statik/Linux_Storage/Xilinx/14.7/ISE_DS$ source /media/statik/Linux_Storage/Xilinx/14.7/ISE_DS/ISE/.settings64.sh

statik@statik-P15SM-A-SM1-A:/media/statik/Linux_Storage/Xilinx/14.7/ISE_DS$ xise

Command 'xise' not found, did you mean:

command 'xine' from deb xine-ui (0.99.13-1)

Try: sudo apt install `

After that you check that installation is succesfull (by source settings64.sh and triing run ise), you can add Luncher using following gist. It is required to change content accoring to installation path
Create Xilinx ISE Luncher > https://gist.github.com/aliemo/27d7c04a9e000e138a12320519fc749a

Found ise under ISE/bin/lin64. That runs. Added it my menu. Looking for my old license file now.

I have my license file, but the license manager does not come up. I either need to find the app for the license manager, or the location to place the license file.

OK, found it. Placed them under ~/.Xilinx and it works. Thanks!

The link to the gist is broken. Could you please provide an updated link?

The link to the gist is broken. Could you please provide an updated link?

The gist link to create launcher just updated.

FYI - libncurses5 no longer ships with Ubuntu 24.04 and you have to manually install DPKG

Download libtinfo5_6.4-2_amd64 and then install the package:

wget http://launchpadlibrarian.net/648013231/libtinfo5_6.4-2_amd64.deb
sudo dpkg -i libtinfo5_6.4-2_amd64.deb

Download libncurses5_6.4-2_amd64 and install the package:

wget http://launchpadlibrarian.net/648013227/libncurses5_6.4-2_amd64.deb 
sudo dpkg -i libncurses5_6.4-2_amd64.deb

FYI - libncurses5 no longer ships with Ubuntu 24.04 and you have to manually install DPKG

Download libtinfo5_6.4-2_amd64 and then install the package:

wget http://launchpadlibrarian.net/648013231/libtinfo5_6.4-2_amd64.deb
sudo dpkg -i libtinfo5_6.4-2_amd64.deb

Download libncurses5_6.4-2_amd64 and install the package:

wget http://launchpadlibrarian.net/648013227/libncurses5_6.4-2_amd64.deb 
sudo dpkg -i libncurses5_6.4-2_amd64.deb

Thanks for contribution. Yet I'm using 2022 for development. I will use this for updated version. Some dependency issues reported on topic of high memory usage.

I am getting the error in kubuntu 2024
After changing the fonts to Ubuntu

I am getting the error in kubuntu 2024 After changing the fonts to Ubuntu

Xilinx ISE has some issue with noto related fonts, Specially on Kubuntu.

The ISE design tools installer is a Qt application. If you are running the KDE desktop environment, the installer may try to load the "Oxygen" widget theme, which will fail due to the older Qt framework bundled with the Xilinx ISE design tools. You need to remove the QT_PLUGIN_PATH environment variable before executing the installer:

$ unset QT_PLUGIN_PATH

an other way is remove noto-fonts from your system and install older version if you need.

I have spent quite some time installing and trying to workaround all of these bugs, and having followed your guide, the GUI works find, but when trying to simulate any behavioral model, I get:

FATAL_ERROR:Simulator:Fuse.cpp:209:1.133 - Failed to compile one of the generated C files. Please recompile with -mt off -v 1 switch to identify which design unit failed.  For technical support on this issue, please visit http://www.xilinx.com/support.

When following this advice and adding trying to compile with

fuse -intstyle ise -incremental -lib secureip -o $PROJECT_DIR/$TESTBENCH_isim_beh.exe -prj $PROJECT_DIR/$TESTBENCH_beh.prj work.$TESTBENCH -mt off -v 1

it yields:

isim/my_xor_my_xor_sch_tb_isim_beh.exe.sim/work/my_xor_my_xor_sch_tb_isim_beh.exe_main.c: In function ‘main’:
isim/my_xor_my_xor_sch_tb_isim_beh.exe.sim/work/my_xor_my_xor_sch_tb_isim_beh.exe_main.c:29:5: error: implicit declaration of function ‘ieee_p_2592010699_init’ [-Wimplicit-function-declaration]
   29 |     ieee_p_2592010699_init();
      |     ^~~~~~~~~~~~~~~~~~~~~~
isim/my_xor_my_xor_sch_tb_isim_beh.exe.sim/work/my_xor_my_xor_sch_tb_isim_beh.exe_main.c:30:5: error: implicit declaration of function ‘ieee_p_1242562249_init’ [-Wimplicit-function-declaration]
   30 |     ieee_p_1242562249_init();
      |     ^~~~~~~~~~~~~~~~~~~~~~
isim/my_xor_my_xor_sch_tb_isim_beh.exe.sim/work/my_xor_my_xor_sch_tb_isim_beh.exe_main.c:31:5: error: implicit declaration of function ‘unisim_p_0947159679_init’ [-Wimplicit-function-declaration]
   31 |     unisim_p_0947159679_init();
      |     ^~~~~~~~~~~~~~~~~~~~~~~~
isim/my_xor_my_xor_sch_tb_isim_beh.exe.sim/work/my_xor_my_xor_sch_tb_isim_beh.exe_main.c:32:5: error: implicit declaration of function ‘unisim_a_2661327437_0605893366_init’ [-Wimplicit-function-declaration]
   32 |     unisim_a_2661327437_0605893366_init();
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
isim/my_xor_my_xor_sch_tb_isim_beh.exe.sim/work/my_xor_my_xor_sch_tb_isim_beh.exe_main.c:33:5: error: implicit declaration of function ‘unisim_a_3055263662_1392679692_init’ [-Wimplicit-function-declaration]
   33 |     unisim_a_3055263662_1392679692_init();
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
isim/my_xor_my_xor_sch_tb_isim_beh.exe.sim/work/my_xor_my_xor_sch_tb_isim_beh.exe_main.c:34:5: error: implicit declaration of function ‘unisim_a_3762448000_2971575191_init’ [-Wimplicit-function-declaration]
   34 |     unisim_a_3762448000_2971575191_init();
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
isim/my_xor_my_xor_sch_tb_isim_beh.exe.sim/work/my_xor_my_xor_sch_tb_isim_beh.exe_main.c:35:5: error: implicit declaration of function ‘work_a_3411943472_3212880686_init’ [-Wimplicit-function-declaration]
   35 |     work_a_3411943472_3212880686_init();
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
isim/my_xor_my_xor_sch_tb_isim_beh.exe.sim/work/my_xor_my_xor_sch_tb_isim_beh.exe_main.c:36:5: error: implicit declaration of function ‘work_a_2106042665_3212880686_init’ [-Wimplicit-function-declaration]
   36 |     work_a_2106042665_3212880686_init();
      |     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Any idea what to do? I have made sure all relevant libraries are installed, but it does not change the output.

I think source of this issue can be related to the c++ related toolchains.
One idea is change it to linked version of compiler and libraries. Also a correct licence should be used.