// enum CommissioningStage with numeric values
// from
// https://github.com/project-chip/connectedhomeip/blob/v1.2.0.1/src/controller/CommissioningDelegate.h

enum CommissioningStage : uint8_t
{
    kError = 0,
    kSecurePairing = 1,              ///< Establish a PASE session with the device
    kReadCommissioningInfo = 2,      ///< Query General Commissioning Attributes, Network Features and Time Synchronization Cluster
    kReadCommissioningInfo2 = 3,     ///< Query SupportsConcurrentConnection, ICD state, check for matching fabric
    kArmFailsafe = 4,                ///< Send ArmFailSafe (0x30:0) command to the device
    kConfigRegulatory = 5,           ///< Send SetRegulatoryConfig (0x30:2) command to the device
    kConfigureUTCTime = 6,           ///< SetUTCTime if the DUT has a time cluster
    kConfigureTimeZone = 7,          ///< Configure a time zone if one is required and available
    kConfigureDSTOffset = 8,         ///< Configure DST offset if one is required and available
    kConfigureDefaultNTP = 9,        ///< Configure a default NTP server if one is required and available
    kSendPAICertificateRequest = 10,  ///< Send PAI CertificateChainRequest (0x3E:2) command to the device
    kSendDACCertificateRequest = 11,  ///< Send DAC CertificateChainRequest (0x3E:2) command to the device
    kSendAttestationRequest = 12,     ///< Send AttestationRequest (0x3E:0) command to the device
    kAttestationVerification = 13,    ///< Verify AttestationResponse (0x3E:1) validity
    kSendOpCertSigningRequest = 14,   ///< Send CSRRequest (0x3E:4) command to the device
    kValidateCSR = 15,                ///< Verify CSRResponse (0x3E:5) validity
    kGenerateNOCChain = 16,           ///< TLV encode Node Operational Credentials (NOC) chain certs
    kSendTrustedRootCert = 17,        ///< Send AddTrustedRootCertificate (0x3E:11) command to the device
    kSendNOC = 18,                    ///< Send AddNOC (0x3E:6) command to the device
    kConfigureTrustedTimeSource = 19, ///< Configure a trusted time source if one is required and available (must be done after SendNOC)
    kICDGetRegistrationInfo = 20,     ///< Waiting for the higher layer to provide ICD registraion informations.
    kICDRegistration = 21,            ///< Register for ICD management
    kICDSendStayActive = 22,          ///< Send Keep Alive to ICD
    kWiFiNetworkSetup = 23,           ///< Send AddOrUpdateWiFiNetwork (0x31:2) command to the device
    kThreadNetworkSetup = 24,         ///< Send AddOrUpdateThreadNetwork (0x31:3) command to the device
    kFailsafeBeforeWiFiEnable = 25,   ///< Extend the fail-safe before doing kWiFiNetworkEnable
    kFailsafeBeforeThreadEnable = 26, ///< Extend the fail-safe before doing kThreadNetworkEnable
    kWiFiNetworkEnable = 27,          ///< Send ConnectNetwork (0x31:6) command to the device for the WiFi network
    kThreadNetworkEnable = 28,        ///< Send ConnectNetwork (0x31:6) command to the device for the Thread network
    kFindOperational = 29,            ///< Perform operational discovery and establish a CASE session with the device
    kSendComplete = 30,               ///< Send CommissioningComplete (0x30:4) command to the device
    kCleanup = 31,                    ///< Call delegates with status, free memory, clear timers and state
    /// Send ScanNetworks (0x31:0) command to the device.
    /// ScanNetworks can happen anytime after kArmFailsafe.
    /// However, the cirque tests fail if it is earlier in the list
    kScanNetworks = 32,
    /// Waiting for the higher layer to provide network credentials before continuing the workflow.
    /// Call CHIPDeviceController::NetworkCredentialsReady() when CommissioningParameters is populated with
    /// network credentials to use in kWiFiNetworkSetup or kThreadNetworkSetup steps.
    kNeedsNetworkCreds = 33,
};