drmn0: <Intel Haswell (ULT GT2 mobile)> on vgapci0
info: [drm] Memory usable by graphics device = 2048M
info: [drm] MTRR allocation failed.  Graphics performance may suffer.
intel_iicbb0 on drmn0
iicbus0: <Philips I2C bus>error: [drm:pid28885:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100
 on iicbb_nostop0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iicbus1: <Philips I2C bus> on intel_gmbus0
iic1: <I2C generic I/O> on iicbus1
intel_iicbb1 on drmn0
iicbus2: <Philips I2C bus> on iicbb_nostop1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iicbus3: <Philips I2C bus> on intel_gmbus1
iic3: <I2C generic I/O> on iicbus3
intel_iicbb2 on drmn0
iicbus4: <Philips I2C bus> on iicbb_nostop2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iicbus5: <Philips I2C bus> on intel_gmbus2
iic5: <I2C generic I/O> on iicbus5
intel_iicbb3 on drmn0
iicbus6: <Philips I2C bus> on iicbb_nostop3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iicbus7: <Philips I2C bus> on intel_gmbus3
iic7: <I2C generic I/O> on iicbus7
intel_iicbb4 on drmn0
iicbus8: <Philips I2C bus> on iicbb_nostop4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iicbus9: <Philips I2C bus> on intel_gmbus4
iic9: <I2C generic I/O> on iicbus9
intel_iicbb5 on drmn0
iicbus10: <Philips I2C bus> on iicbb_nostop5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iicbus11: <Philips I2C bus> on intel_gmbus5
iic11: <I2C generic I/O> on iicbus11
vgapci0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 271 to local APIC 2 vector 56
vgapci0: using IRQ 271 for MSI
info: [drm] MSI enabled 1 message(s)
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
drm_iic_dp_aux0 on drmn0
drm_iic_dp_aux1 on drmn0
drm_iic_dp_aux2 on drmn0
drmn0: taking over the fictitious range 0xe0000000-0xf0000000
info: [drm] Connector eDP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.eDP-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector DP-1: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-1
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector HDMI-A-2: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.HDMI-A-2
info: [drm]   - kern.vt.fb.default_mode
info: [drm] Connector DP-2: get mode from tunables:
info: [drm]   - kern.vt.fb.modes.DP-2
info: [drm]   - kern.vt.fb.default_mode
info: [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
fbd0 on drmn0
VT: Replacing driver "vga" with new "fb".
info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
ugen0.2: <ICY BOX IB-245-C31> at usbus0
umass0 on uhub0
umass0: <ICY BOX IB-245-C31, class 0/0, rev 2.10/0.00, addr 10> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:1:0: Attached to scbus1
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
em0: Link is up 1000 Mbps Full Duplex
em0: link state changed to UP
Autoloading module: uhid.ko
pass1: Serial Number 4C530001191210122384
pass1: 40.000MB/s transfers
GEOM: new disk da0
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <SanDisk Cruzer Spark 1.00> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 4C530001191210122384
da0: 40.000MB/s transfers
da0: 14955MB (30629376 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
da0: Delete methods: <NONE(*),ZERO>
uhub2: 8 ports with 8 removable, self powered
ugen0.3: <LENOVO Lenovo ThinkPad Dock> at usbus0
uhub3 on uhub0
uhub3: <LENOVO Lenovo ThinkPad Dock, class 9/0, rev 2.00/50.30, addr 2> on usbus0
Root mount waiting for: usbus0
uhub3: 4 ports with 3 removable, self powered
ugen0.4: <Lenovo Lenovo ThinkPad Dock> at usbus0
uhub4 on uhub3
uhub4: <Lenovo Lenovo ThinkPad Dock, class 9/0, rev 2.00/0.01, addr 3> on usbus0
uhub4: MTT enabled
Root mount waiting for: usbus0
uhub4: 3 ports with 3 removable, self powered
ugen0.5: <vendor 0x18f8 USB OPTICAL MOUSE> at usbus0
ukbd0 on uhub4
ukbd0: <vendor 0x18f8 USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 4> on usbus0
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
Root mount waiting for: usbus0
ugen0.6: <Sierra Wireless Inc. Sierra Wireless EM7345 4G LTE> at usbus0
Root mount waiting for: usbus0
ugen0.7: <vendor 0x138a product 0x0017> at usbus0
Root mount waiting for: usbus0
usb_alloc_device: set address 8 failed (USB_ERR_TIMEOUT, ignored)
Root mount waiting for: usbus0
usbd_setup_device_desc: getting device descriptor at addr 8 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=8, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 8 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=8, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 8 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=8, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 8 failed, USB_ERR_TIMEOUT
Root mount waiting for: usbus0
Root mount waiting for: usbus0
usbd_req_re_enumerate: addr=8, set address failed! (USB_ERR_TIMEOUT, ignored)
usbd_setup_device_desc: getting device descriptor at addr 8 failed, USB_ERR_TIMEOUT
ugen0.8: <Unknown > at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
Root mount waiting for: usbus0
ugen0.8: <J30E9S6SB Integrated Camera> at usbus0
Root mount waiting for: usbus0
ugen0.9: <LENOVO Lenovo ThinkPad Dock> at usbus0
uhub5 on uhub0
uhub5: <LENOVO Lenovo ThinkPad Dock, class 9/0, rev 3.00/50.31, addr 9> on usbus0
Root mount waiting for: usbus0
uhub5: 4 ports with 3 removable, self powered
atrtc0: providing initial system time